Hot runner

From Wikipedia, the free encyclopedia

A hot runnersystem is an assembly of heated components used in plastic injection molds that inject molten plastic into the cavities of the mold. (The cavities are the part of the mold shaped like the parts to be produced)

By contrast, a "conventional" runner of and injection mold, is simply a channel formed between the two halves of the mold, for the purpose of carrying plastic from the injection molding machine nozzle to the cavities. Each time the mold opens to eject the newly formed plastic parts, the material in the runner is ejected as well, resulting in waste.

A hot runner system usually includes a heated manifold and a number of heated nozzles. The main task of the manifold is to distribute the plastic entering the mold to the various nozzles which then meter it precisely to the injection points in the cavities.

Hot runner systems were first developed and came into sporadic use in the early 60s with generally negative results. They gained popularity in the 80s and 90s as technological advantages allowed improved reliability and the escalation of plastic materials prices made hot runner systems more desirable and cost effective.

Hot runners are fairly complicated systems, they have to maintain the plastic material within them heated uniformly, while the rest of the injection mold is beng cooled in order to solidify the product quickly. For this reason they are usually assembled from components premanufactured by specialized companies.

Two main types of hot runner systems are the externally heated and internally heated. In the externally heated type, molten plastic runs within a solid manifold and within the nozzles. In the internally heated, (now obsolete) the plastic flows directly over slender heaters inside oversized runners. The outside boundaries of the runners normally solidify, so the plastic material flows only in proximity of the internal heaters or "torpedoes".

Hot runners usually make the mold more expensive to manufacture and run, but allow savings by reducing plastic waste and by reducing the cycle time. (do not have to wait until the conventional runners freezes).