Horse harness
From Wikipedia, the free encyclopedia
A horse harness is a type of horse tack that allows a horse or other equine to pull various horse-drawn vehicles such as a carriage, wagon or sleigh. Harnesses may also be used to hitch animals to other loads such as a plough or canal boat.
For heavy hauling, the harness must include a horse collar to allow the animal to use its full weight and strength. For light work, such as horse show competition where light carts are used, a harness needs only a breastcollar. Harness components designed for other animals (such as the yoke used with oxen) are not suitable for horses and will not allow the horse to work efficiently.
Putting harness on a horse is called harnessing or harnessing up. Attaching the harness to the load is called putting to (British Isles) or hitching (North America). The order of putting on harness components varies by discipline, but when a horse collar is used, it usually is put on first.
Contents |
[edit] Parts of the harness
.png/300px-Harness_(PSF).png)
Parts of the harness include:[1]
- A collar to allow the horse to push against the harness with its shoulders and chest. Two main alternative arrangements (with some intermediate types):
- A horse collar (or full collar). A padded loop fitting closely around the horse's neck, pointed at the top to fit the crest of the neck. Used for heavier pulling, especially when used without a swingletree or whippletree.
- A breastcollar (breastplate). A padded strap running around the chest from side to side. Used for light work, or somewhat heavier work using a swingletree or whippletree to allow each shoulder to pull evenly on each step without rubbing.
- Hames (if a full collar is used). Two metal or wooden strips which take the full force of the pull, padded by the collar.
- Breeching (pronounced /ˈbrɪtʃɨŋ/, "britching"). A strap around the horse's haunches allowing it to set back and slow a vehicle, usually hooked to the shafts or pole of the vehicle. Used for a single horse, a pair, or in a larger team, only for the wheelers (the animal or pair closest to the vehicle). The leaders in a team do not have breeching, as they are in front of the shafts or pole and so cannot slow the vehicle. Breeching may also be omitted in fine harness, when the cart is light, and other types, when the braking effort is provided by brakes on the wheels.
- Traces or tugs. The straps or chains which take the pull from the breastcollar or hames to the load.
- Saddle. A small supportive piece of the harness that lies on the horse's back (not the same as a riding saddle).
- Girth. A strap that goes firmly around the girth of the horse to attach the harness saddle.
- Belly-band. A strap that goes more loosely under the belly of the horse, outside the girth. Prevents the shafts rising up, especially on a two-wheeled vehicle (where weight on the rear of the cart may tip the front up).
- Back band. A strap going through the harness saddle to join the belly band either side. Takes the weight of the shafts or pole. In cart harness it is replaced by a chain running in a groove in the harness saddle, hooked to the shafts either side.
- Sliding back band. In a two-wheeled vehicle the shafts are fixed to the vehicle to hold it level. On a side-slope, one shaft will be higher than the other, and in this case the back band is normally allowed to slide sideways through the harness saddle, so the horse can walk upright without strain on the harness.
- Fixed back-band. In a four-wheeled vehicle the shafts or pole must be allowed to hinge up and down, to allow the horse and vehicle to pass over hillocks and dips. Often shafts are independently hinged, and on a side-slope these will each hinge to follow the horse, and a sliding back band is not needed. However, if a sliding back band was used with independent shafts it might allow one shaft to ride up higher than the other, and so for such shafts the back-band is normally fixed to the harness saddle. On other four-wheeled vehicles the two shafts hinge together, and a sliding back band is needed as for two-wheeled vehicles.
- Surcingle: term used within certain light fine harness designs to describe the combination of a light girth and harness saddle.
- False martingale. A strap passing between the front legs, from the centre of the collar to the belly band, to hold the collar in position. Called "false", because unlike a true martingale it does not attach to the reins.
- Crupper. A strap attached to the rear of the saddle or surcingle that places a soft padded loop under the base of the tail, to keep the harness from slipping forward.
- Shaft tugs, or just tugs. Stiff leather loops attached to the back band to hold up the shafts of a vehicle.
- Terrets. Metal loops on the saddle and collar to support the reins. The bridles of the rear animals of a large team may also have terrets to take the reins of the animals to the front of them.
- Reins. Long leather straps (occasionally ropes) running from the bit to the driver's hands, used to guide the horses. In teams of several animals these may be joined together so the driver only need hold one pair.
- Bridle: When working in harness, most horses wear a specialised bridle that includes features not seen in bridles used for riding. These usually include blinders, also called blinkers or winkers, near the eyes of the horse, to prevent it from being distracted by the cart and other activity behind it. Harness racing horses sometimes have a shadow roll on the noseband of the bridle.
- Bits for harness (most often a Liverpool bit) may be similar to those used for riding, particularly in mouthpiece, usually operating with a curb bit and adjustable leverage to help balance the effect of the reins on different horses in a team.
- Some horses pulling lighter vehicles, particularly at horse shows and other public exhibitions, may have an overcheck added to assist them in holding a desired head position, and for safety reasons. In some cases a specially designed running martingale may also be added.
- Horse brasses. Brass plaques mounted on leather straps, used for decoration, especially on working harness. Made in a very wide range of designs.
[edit] Types of harness
[edit] Show harness
Show harnesses for light cart driving have a breastcollar instead of a horse collar and are made with strong but refined-looking leather throughout, usually black and highly polished. In draft horse showing and combined driving, horse collars are seen, but harness leather is still highly polished and well-finished.
[edit] Carriage or van harness
Lighter weight but strong harness similar to show harness, used for pulling passenger vehicles such as buggies or carts, or other lighter loads. The traces attach either to the shafts of the vehicle or to the vehicle itself, and the harness may have either a horse collar or a breastcollar.
[edit] Racing harness
The racing harness, like the show harness, is a breastcollar harness. Horses are hitched to a very lightweight two-wheeled cart, called a sulky. Most race harnesses incorporate a running martingale and an overcheck. Sometimes harness racing horses are raced with an "open" bridle, one that does not have blinkers. Specialized equipment, called pacing hobbles, are added to the harness of race horses who pace in order to help them maintain their gait.[2]
[edit] Cart or wagon harness
Harness for pulling heavier vehicles always has a horse collar. The traces are often made of chain and attach to loops on the shafts of the vehicle. A chain attached to the shafts may be passed over the saddle to carry their weight[3]. Reins are of rope or leather, depending on region of the world.
[edit] Plow harness
Similar to cart harness but without breeching, used for dragged loads such as plows, harrows, canal boats or logs. This style is also used on the leaders in a team of animals pulling a vehicle. The traces attach to a whippletree behind the horse and this then pulls the load (or in larger teams may attach to further whippletrees).
[edit] See also
- Driving (horse)
- Horse tack
- Horse collar
- Phalera
- Harness racing
- Horse-drawn vehicle
- Draft horse showing
- Combined driving
[edit] References
- ^ Harness parts
- ^ [http://www.oddsonracing.com/about_racing_equipment.cfm Harness racing equipment
- ^ Miller W C, Practical Animal Husbandry, Oliver and Boyd 1959 ed, p 313
