Honda E engine
From Wikipedia, the free encyclopedia
The E-series was a line of inline 4-cylinder automobile engines from Honda. These engines were used in the popular Honda Civic, Accord, and Prelude cars in the 1970s and 1980s. One notable technology was CVCC, introduced with this family, which allowed the company to meet high emissions standards without using a catalytic converter.
The CVCC ED1 was on the Ward's 10 Best Engines of the 20th century list.
Contents |
[edit] EB
The EB series displaced 1.2 L (1170 cm³) and was an SOHC 8-valve design with a 2 barrel carburetor. Output for the EB1 was 50 bhp (37 kW) @ 5000 rpm and 59 ft·lbf (80 N·m) @ 3000 rpm, and this was up to 63 bhp (47 kW) @ 5000 rpm and 77 ft·lbf (104 N·m) @ 3000 rpm for the EB2 and EB3.
- EB1
- 1973- Honda Civic
- EB2
- 1974-1979 Honda Civic
- EB3
- 1978-1979 Honda Civic
[edit] EC
The EC series engine is used in the gasoline/electric Honda Insight Hybrid. This 3 cylinder Engine is a SOHC 12 valve sized 1.0 L (995 cc)-DK. The ECA1 produces 68 hp (50 kW) @ 5700 rpm and 67 ft·lbf (N·m) of torque @ 4800. The ECA1 motor is assisted in various circumstances by a 10 kW permanent magnet DC electric motor adding 8 horsepower and 16 ft·lbf torque throughout the entire RPM range. It is completely unrelated to the rest of the E-series engines.
- ECA1
- 2000-2006 Honda Insight
[edit] ED
The ED series introduced the CVCC technology. This group displaced 1.5 L (1487 cc) and used an SOHC 8-valve design. Output with a 3 barrel carburetor was 52 hp (39 kW) @ 5000 rpm and 68 ft·lbf (92 N·m) @ 3000 rpm.
- ED1
- 1975- Honda Civic CVCC
- ED2
- 1975- Honda Civic Wagon
- ED3
- 1976-1979 Honda Civic CVCC
- ED4
- 1976-1979 Honda Civic Wagon
[edit] EL
The EL displaced 1.6 L (1600 cc) and was an SOHC 8-valve engine with a 3 barrel carburetor. Output was 68 hp (51 kW) @ 5000 rpm and 85 ft·lbf (115 N·m) @ 3000 rpm.
- EL1
- 1976-1978 Honda Accord
- 1979-1982 Honda Prelude (Australian and Canadian models)
[edit] EJ
The EJ displaced 1.3 L (1335 cc) and was an SOHC 12-valve CVCC engine with a 3 barrel carburetor. 4 intake valves, 4 exhaust valves, and 4 auxiliary valves. Output was 68 hp (51 kW) @ 5000 rpm and 77 ft·lbf (104 N·m) @ 3000 rpm.
- EJ1
- 1980- Honda Civic
- 1981-1983 Honda Civic CVCC
[edit] EK
There were 2 different EK engines, until late 1979 the heads used a two port exhaust design. On the 1979 through 1981 EK1 the head used a four port exhaust design. For 1982 and 1983, the intake and exhaust port layout was changed, and head bolt spacing was changed to allow better flow. EK motors were CVCC and were 8 valve motors with 4 additional auxiliary intake valves. Both displaced 1.8 L (1751 cc). 2-port output was 72 hp (54 kW) @ 4500 rpm and 94 ft·lbf (127 N·m) @ 3000 rpm, while the original 4-port head raised this to 75 hp (56 kW) @ 4500 rpm and 96 ft·lbf (130 N·m) @ 3000 rpm. The revised 4-port had another slight horsepower increase.
- EK1 2-port
- 1978-1979 Honda Accord
- 1979 Honda Prelude
- EK1 4-port
- 1980-1981 Honda Accord
- 1980-1981 Honda Prelude
- EK1 4-port (Revised)
- 1982-1983 Honda Accord
- 1982 Honda Prelude
[edit] EM
The EM displaced 1.5 L (1487 cc) and was an SOHC 12-valve CVCC engine. Early versions produced 52 hp (39 kW) @ 5000 rpm and 68 ft·lbf (92 Nm) @ 3000 rpm, while later ones upped the output to 63 hp (47 kW) @ 5000 rpm and 77 ft·lbf (104 N·m) @ 3000 rpm. All used a 3 barrel carburetor.
- EM1
- 1980 Honda Civic, 52 hp (39 kW)
- 1981-1983 Honda Civic, 63 hp (47 kW)
[edit] EN
The EN displaced 1335 CC. 8 valve head fitted on Civics in Canada. All Aluminum engine.
EN1 1980-1983 Wagons and Hatchbacks
[edit] ES
The ES displaced 1.8 L (1829 cc). All ES engines were SOHC 12-valve engines. The ES1 used dual sidedraft carburetors to produce 100 hp (75 kW) @ 5500 rpm and 104 ft·lbf (141 N·m) @ 4000 rpm. The ES2 replaced this with a standard 3 barrel carburetor for 86 hp (64 kW) @ 5800 rpm and 99 ft·lbf (134 N·m) @ 3500 rpm. Finally, the ES3 used PGM-FI for 101 hp (75 kW) @ 5800 rpm and 108 ft·lbf (146 N·m) @ 2500 rpm.
- ES1
- 1983-1984 Honda Prelude
- ES2
- 1984-1985 Honda Accord
- ES3
- 1985- Honda Accord SE-i
[edit] ET
The ET displaced 1.8 L (1829 cc) and was an SOHC 12-valve engine. Dual sidedraft carburetors produced 100 hp (75 kW) @ 5500 rpm and 104 ft·lbf (141 N·m) @ 4000 rpm.
- ET1
- 1985-1986 Honda Prelude
[edit] EV
The EV displaced 1.3 L (1342 cc) and was an SOHC 12-valve design. 3 barrel carburetors produced 60 hp (45 kW) @ 5500 rpm and 73 ft·lbf (99 N·m) @ 3500 rpm.
- EV1
- 1984-1986 Honda Civic
- 1984-1986 Honda CRX
- EV2
- 1984-1989 Rover 213
[edit] EW
The final E-family engine was the EW. Displacing 1.5 L (1488 cc), the EWs were SOHC 12-valve engines. Early 3 barrel EW1s produced between 58 and 76 hp (43 and 57 kW) and 80 to 84 ft·lbf (108 to 114 N·m). The fuel injected EW3 and EW4 produced 91 hp (68 kW) @ 5500 rpm and 93 ft·lbf (126 N·m) @ 4500 rpm. The "EW" name was replaced by the, commonly known, Honda "D series." The EW(1,2,3,4, and 5) received a new name as well as engine stamp placement on the front of the engine like the "modern D series" (aka 1988 and newer) in 1987 as the D15A(1,2,3,4, and 5).
- EW1
- 1984-1985 Honda Civic/CRX DX(unlabeled)
- 1984-1987 Honda Civic
- EW2
- 1984-1987 Honda Civic non-CVCC EFI (CDM)
- EW3
- 1985- Honda Civic/CRX Si non-CVCC
- EW4
- 1985-1987 Honda CRX Si non-CVCC
- 1986-1987 Honda Civic Si non-CVCC
- EW5
- similar to the EW1, displacing 1.5L and CVCC head design, the EW5 was fuel injected with the use of a fifth injector. With the use of fuel injection and some parts/specifications from the EW3 and 4, the EW5 was rated at 108hp. The EW5 was not available in the North American markets.(more information needed)
