Heckler & Koch MP7

From Wikipedia, the free encyclopedia

Heckler & Koch MP7

The Heckler & Koch MP7A1
Type Submachine gun
Place of origin Flag of Germany Germany
Service history
Used by See Users
Production history
Manufacturer Heckler & Koch
Produced 2001-present
Specifications
Weight 1.9 kg (4.19 lb)
Length 590 mm (23.2 in) stock extended / 380 mm (15.0 in) stock collapsed
Barrel length 180 mm (7.1 in)
Width 42 mm (1.7 in)
Height 172 mm (6.8 in)

Cartridge 4.6x30mm
Action Gas-operated, rotating bolt
Rate of fire 950 + 200 rounds/min
Muzzle velocity Approx. 710 m/s (2,329 ft/s)
Effective range 200 m
Feed system 20 or 40-round box magazine

The MP7 is a German submachine gun manufactured by Heckler & Koch (H&K) and chambered for the 4.6x30mm cartridge. It was designed in conjunction with the new cartridge to meet NATO requirements published in 1989 calling for a personal defense weapon (PDW) class firearm with a greater ability to defeat body armor than current weapons, which are limited due to the use of conventional pistol cartridges. The MP7 went into production in 2001. It is a direct rival to the FN P90 also developed in response to NATO's requirement. The weapon has been revised since its introduction and the current production version is the MP7A1 (see Variants).

The proliferation of high-quality body armor has begun to make guns that fire pistol ammunition (such as HK's earlier MP5 or USP) ineffective. In response to this trend, HK designed the MP7 (along with the brand new UCP, which uses the same ammunition) to penetrate body armor, but small enough to be used in place of either a pistol or a submachine gun.

Contents

[edit] Design details

The MP7 essentially operates like a scaled-down assault rifle, with the same action as HK's G36. It fires a specially designed, armor-piercing round with a muzzle velocity nearly as high as that of the 5.56x45mm NATO cartridge used by many modern rifles. This ammunition is unique among submachine guns in that the bullet is made almost entirely of a hardened steel penetrator instead of softer brass or lead. The ammunition is virtually exclusive to the gun (save for the H&K UCP and a planned variant of the Brugger & Thomet MP-9) and also offers low recoil. The round also has a small diameter (it can almost be described as a scaled down .223 Remington), allowing for high capacity in a very small magazine. Even though the round is much smaller in diameter than a 9 mm bullet, its special properties give it comparable stopping power[citation needed]. The projectile is designed to tumble in tissue after penetrating body armor, thus causing more damage than a bullet of this size would normally do[citation needed]. But this is still a point of widespread discussion since the MP7 and its specially designed ammunition have yet to prove themselves in action.

The weapon allows a conventional 20-round or 40-round box magazine to be fit within the pistol grip (the former being comparable in size to a 15-round 9 mm magazine, while the latter compares to a 30-round 9 mm magazine). The weapon features an ambidextrous fire-select lever and rear cocking grip. It has an extendable stock and a folding front grip; it can be fired either one-handed or two-handed. It is compact and light using polymers in its construction.

The MP7 is marketed as a direct competitor to the FN P90. Some observers make the distinction that the MP7 is closer to a true machine pistol than a submachine gun. The FN P90 features a simpler straight blowback design that fires with a closed breech, so there is no rotating bolt or gas system, but it is bulkier and heavier than the MP7.

[edit] Variants

A recent production MP7A1 (note the safety trigger) of the Bundeswehr with a Zeiss Z-Point red dot sight and laser light module
A recent production MP7A1 (note the safety trigger) of the Bundeswehr with a Zeiss Z-Point red dot sight and laser light module
  • PDW - The first prototype shown in 1999 was designated the 'PDW' (Personal Defense Weapon). It had a short Picatinny rail on the top and a smooth pistol grip surface.
  • MP7 - In 2001 it was named the 'MP7' and went into production. It included a full length Picatinny rail, a thick curved stock and an anti-slide surface on the pistol grip much like the HK USP. It also featured folding iron sights mounted on the Picatinny rail and the button to fold the foregrip was made larger for easier operation.
  • MP7A1 - In 2003 its designation was changed to 'MP7A1' and featured a redesigned pistol grip with a different surface and curved shape, a smaller stock with a straight buttpad, side mounted Picatinny rails as standard and the folding iron sights were made more compact. The weapon was made slightly longer, but because the stock was shortened, the overall length did not change. The stock is also able to be locked in 3 positions. Recent MP7A1 models have a 'Safety Trigger' similar to a Glock pistol, the middle section of the trigger must be pulled first before the outer part will move.[1] This helps to stop accidental discharges if the trigger is bumped.

Each revision of the weapon is slightly heavier, possibly due to the addition of more Picatinny rails and product improvements. The lengthened body of the MP7A1 could have also added a small amount of weight. [2]

[edit] Accessories

MP7A1 with suppressor and sight.
MP7A1 with suppressor and sight.

The weapon features a full-length, top-mounted Picatinny rail that comes standard with folding fore and rear iron sights attached. When the sights are folded flat, they resemble simple open sights. Folded up, they feature aperture sights. The sights can easily be removed by loosening a single screw and lifting them off. It can fit additional rails on the sides of the barrel, which allow it to mount commercial optical sights (telescopic and red dot sights), laser aiming modules (LAM), and tactical flashlights. The MP7 can also equip a suppressor.

[edit] Users

[edit] References

[edit] External links

Wikimedia Commons has media related to:
Videos