Heckler & Koch G3

From Wikipedia, the free encyclopedia

G3

Heckler & Koch G3A3
Type Battle rifle
Place of origin Flag of West Germany West Germany
Service history
In service 1958–present
Used by See Users
Wars Portuguese Colonial War, Rhodesian Bush War, Carnation Revolution, Cambodian Civil War, Iran-Iraq War, Turkey-PKK conflict, Sierra Leone Civil War, Ethiopian Civil War, Operation Enduring Freedom/ISAF - Afghanistan, Second Gulf War
Production history
Designer Mauser, CETME, Heckler & Koch
Designed 1950s
Manufacturer Heckler & Koch and Rheinmetall
Variants See Variants
Specifications
Weight 4.4 kg (9.7 lb) (G3A3)
4.7 kg (10 lb) (G3A4)
5.54 kg (12.2 lb) with optic (G3SG/1)
4.1 kg (9.0 lb) (G3K)
Length 1,025 mm (40.4 in) (G3A3)
1,025 mm (40.4 in) stock extended / 840 mm (33.1 in) stock collapsed (G3A4)
1,025 mm (40.4 in) (G3SG/1)
895 mm (35.2 in) stock extended / 711 mm (28.0 in) stock collapsed (G3K)
Barrel length 450 mm (17.7 in)
315 mm (12.4 in) (G3K)
Cartridge 7.62x51mm NATO
Action Roller-delayed blowback
Rate of fire 500-600 rounds/min
Muzzle velocity 800 m/s (2,625 ft/s)
Effective range 100 to 400 m sight adjustments
Feed system 20-round detachable box magazine
Sights Rear: rotary diopter; front: hooded post

The G3 is a 7.62 mm automatic rifle developed in the 1950s by the German armament manufacturer HK (Heckler & Koch GmbH) in collaboration with the Spanish state-owned design and development agency CETME (Centro de Estudios Técnicos de Materiales Especiales).

Contents

[edit] Development

A West German soldier armed with the G3 in 1988.
A West German soldier armed with the G3 in 1988.

The origin of this rifle can be traced back to the end of World War II when engineers at the German Mauser factory designed the 7.92 mm StG45(M) assault rifle. Based on this late-war development, a team of CETME designers led by Ludwig Vorgrimmler (a former Mauser employee) created the LV-50 rifle chambered in the intermediate 7.92x33mm Kurz cartridge and later, the proprietary 7.92x40mm CETME M53 round. At this point, the rifle was renamed the Modelo 2. The Modelo 2 attracted a lot of attention from the West German Border Guards (Bundesgrenzschutz), which sought a new service rifle. Not willing to accept a cartridge outside of the NATO specification, the Germans asked CETME to develop a 7.62 mm version of the rifle. The resulting CETME Model A was chambered for the 7.62x51mm CETME cartridge which has identical chamber dimensions but a reduced-power load compared to the 7.62x51mm NATO round. Further development of the rifle with input from HK produced the CETME Model B which received several modifications including the ability to fire from a closed bolt in both semi-automatic and automatic firing modes, a new perforated sheet-metal handguard (the folding bipod had been the foregrip in previous models), improved ergonomics, and a slightly longer barrel with a rifle grenade launcher mount. In 1958, this rifle was introduced into service with the Spanish Army as the Modelo 58, firing the 7.62x51mm CETME round.

In 1956, the Bundesgrenzschutz canceled its planned procurement of the CETME rifles, adopting the FN FAL (G1) instead. However, the newly formed West German Army (Bundeswehr) now displayed interest and soon purchased a number of CETME rifles (7.62x51mm NATO chambering) for further testing. The CETME, known as the Automatisches Gewehr G3, competed successfully against the SIG SG 510 (G2) and AR-10 (G4) to replace the previously favored G1 rifle. In January 1959, the Bundeswehr officially adopted the CETME rifle. The West German government wanted the G3 rifle to be produced under license in Germany; adoption of the G1 had previously fallen through over FN's refusal to grant such a license. In the case of the G3, the Dutch firm Nederlandse Wapen en Munitiefabrik (NWM) held production and sales rights to the CETME design outside of Spain. To acquire production rights, the West German government offered NWM contracts to supply the Luftwaffe with 20 mm ammunition. Production of the G3 was then assigned to Rheinmetall and HK. The latter company already had ties to CETME, and had worked to further optimize the CETME rifle for use with the full-power 7.62x51mm NATO cartridge (as opposed to the downloaded CETME variant). In 1969, Rheinmetall gave up production rights to the G3 in exchange for HK's promise not to bid on MG3 production. Later in 1977, the West German government ceded ownership of G3 production and sales rights exclusively to HK.

Initial production G3 rifles differed substantially from the later models; early rifles featured closed-type mechanical flip iron sights (with two settings), a lightweight folding bipod, stamped steel handguard, wooden buttstock (in fixed stock models) and a telescoping metal wire stock (in folding stock models). The weapon was modernized during its service life (among other minor modifications it received new sights, flash hider, a plastic foregrip and stock), resulting in the current production variants, the G3A3 (with a fixed synthetic stock) and the G3A4 (telescoping metal stock). The rifles proved successful in export sales, being adopted by the armed forces of over 40 countries. The rifles were and some continue to be produced under license in: France (MAS), Greece (Hellenic Arms Industry), Iran, Mexico, Myanmar, Norway (Kongsberg), Pakistan, Portugal (FBP), Saudi Arabia, Sudan, Sweden (FFV), Thailand, Turkey (MKEK) and the United Kingdom (Royal Ordnance).

[edit] Design details

Early versions of the G3.
Early versions of the G3.

The G3A3 (A4) is a selective-fire automatic weapon that employs a roller-delayed blowback operating system. The two-piece bolt assembly consists of a breech (bolt head) and bolt carrier. The bolt is locked in battery by two sliding cylindrical rollers that engage locking recesses in the barrel extension. The breech is unlocked when both rollers are compressed inward against camming surfaces driven by the rearward pressure of the expanding exhaust gases upon the bolt head. As the rollers move inward recoil energy is transferred to the locking piece and bolt carrier which begin to withdraw while the bolt head remains locked in battery. As the bolt carrier clears the rollers the bolt head is unlocked and begins to recoil backwards at a velocity lower than that of the bolt carrier. The bolt also features an anti-bounce mechanism that prevents the bolt from bouncing off the barrel chamber’s surface. The spring-powered claw extractor is also contained inside the bolt while the lever ejector is located inside the trigger housing (actuated by the recoiling bolt).

The rifle has a hammer firing device and a trigger group with a 3-position fire selector switch that is also the manual safety toggle that secures the weapon from accidentally discharging (fire selector in the “E” or “1” position – single fire mode, “F” or “20” – automatic fire, “S” or “0” – weapon is safe, trigger disabled mechanically). The weapon can be fitted with an optional 4-position safety/fire selector group illustrated with pictograms with an ambidextrous selector lever. The additional, fourth selector setting enables a 3-round burst mode of fire.

The G3A3 (A4) uses either steel (260 g) or aluminum (140 g) double-stacked straight box magazines.

The firearm was equipped with iron sights that consist of a rotary rear drum and hooded front post. This sight, mechanically adjustable for both windage and elevation, has a notch used to fire up to 100 m and three apertures used for: 200, 300 and 400 m. The receiver housing has recesses that work with HK clamp adapters used to mount day or night optics.

The rifled barrel (contains 4 right-hand grooves with a 305 mm twist rate) is ended with a slotted flash suppressor which can also be used to attach a bayonet or serve as a platform for launching rifle grenades. The barrel chamber is fluted, which assists in the initial extraction of a spent cartridge casing (since the breech is opened under very high barrel pressure).

Standard accessories supplied with the rifle include: a detachable bipod (not included with rifles that have a perforated plastic handguard), sling, cleaning kit and a speed-loading device. Several types of bayonet are available for the G3, but with few exceptions they require an adapter to be inserted into the end of the cocking tube. The most common type features a 6 3/4 inch spear-point blade nearly identical with the M7 bayonet, but with a different grip because of its mounting above the barrel. A variant of this exists with an 9 1/4-inch blade that is completely double-edged like a dagger. A rather shoddily made Pakistani bayonet with a British-style bowie blade also exists, and one of the Eickhorn KCB77 variants fits the G3. The weapon can also mount a 40 mm HK79 under-barrel grenade launcher, blank firing adapter a straight blowback bolt (called a “PT” bolt, lacks the locking rollers) used for firing 7.62x51mm ammunition with plastic bullets, a conversion kit used for training with .22 LR ammunition and a sound suppressor (that uses standard ammunition).

Apart from the G3A3 and G3A4 HK also built: the G3A3ZF (essentially a G3A3 with a Hensoldt 4x24 optical sight), the accurized G3SG/1 rifle (hand-selected G3A3’s, equipped with: an improved trigger, Zeiss telescopic sight with a variable 1.5-6x magnification and a cheek riser) and the G3K carbine which uses an HK33 handguard and a short barrel (reduced in length to the base of the front sight post), that is too short for use with a bayonet or rifle grenades.

The G3 served as a basis for many other weapons, among them: the PSG-1 and MSG-90 precision rifles, the HK11 and HK21 family of light machine guns, a single-fire version known as the HK91, a sporterized model called the SR9 (designed for the civilian market) and the MC51 carbine, produced by the UK firm FR Ordnance International Ltd. for special forces. The MC51 weighs 3.1 kg (6.8 lb), has a folded overall length of 625 mm (24.6 in), a barrel length of only 230 mm (9.1 in), which produces a muzzle velocity of approx. 690 m/s (2,263.8 ft/s) and a muzzle energy of 2215 J.

[edit] Variants

Guyanese soldiers in training with various Caribbean countries, including American and British troops. The soldier on the right is armed with a G3A3 rifle.
Guyanese soldiers in training with various Caribbean countries, including American and British troops. The soldier on the right is armed with a G3A3 rifle.
  • G3: Original model based on the CETME Modelo B.
  • G3A1: G3 with a single position, collapsible stock. This design was chosen after earlier experimentation with a ventrally-folding stock. Excessive recoil caused the latter to be dropped from consideration.
  • G3A2: G3 with new rotating drum rear sight.
  • G3A3: The most well known version. Drum sights, a fixed plastic buttstock, and a plastic handguard that does not contact the barrel. The handguard came in a slim, ventilated version and a wide version. The latter allows for the attachment of a bipod.
  • G3A3A1: This is a version of the G3A3 with an ambidextrous trigger group and brass deflector. This is an official German Army designation, not a HK factory one.
  • G3A4: The G3A4 uses drum sights and a single position, collapsible stock. This rifle could also be issued with a scope with the nomenclature G3A4ZF. The ZF stands for Zielfernrohr or "Telescope".
  • G3A4A1: This is a variant of the G3A4 with an ambidextrous trigger group and brass deflector. This is an official German Army designation, not a HK factory one.
  • G3KA4: Smallest of the line, it is a Karabiner, or carbine version of the G3. It features drum sights, a retractable stock, and a 315 mm (12.4 in) barrel.
  • G3KA4A1: Variant of the G3KA4 with an ambidextrous trigger group and brass deflector. This is an official German Army designation, not a HK factory one.
  • G3A5: HK assigned model number for the HK-made Danish version of the G3A3. It differs in that it has a silent bolt-closure device. In Danish service it is known as the Gv M/66. The Gv M/66 was originally intended for use with optics as a designated marksman rifle, while the rest of the squad were issued M1 Garands.
  • G3A6: HK assigned model number for the Iranian-made version of the G3A3.
  • G3A7: HK assigned model number for the Turkish-made version of the G3A3.

[edit] Other military variants and derivatives

  • Gv M/75: Variant leased from the German Bundeswehr / German government by the Danish government to replace the aging M1 Garands. Originally manufactured by either Rheinmetall or HK for the German Bundeswehr. The Gv M/75 rifles are basically G3's with the old style straight cocking tube as opposed to the later FS (Freischwinger) variant. Semi-automatic normally, though could be converted to fully automatic fire by changing the safety lever. This is done without tools.
  • AG-3: Norwegian variant of the G3A5. Produced by Kongsberg Våpenfabrikk. A total of 253,497 units were produced for the Norwegian Armed Forces from 1967 to 1974. The Norwegian AG-3 differs from the original G3; it has a buttstock that is approx. 2 cm longer, the bolt carrier has a serrated thumb groove to aid in silent bolt closure, it features an all-metal cocking handle and a different bayonet mount. On April 11, 2007, it was announced that the AG-3 would be replaced by the Heckler & Koch HK416, in all military branches except for certain groups of the Home Guard.
  • AG-3F1: An AG-3 with a retractable stock as on G3A4. Produced by Kongsberg Våpenfabrikk. A retractable stock was required by certain groups of soldiers within the Norwegian Armed Forces, primarily vehicle crews with limited space inside, particularly where a quick disembarkment from such a vehicle is required. Both versions of the AG-3 have the ability to attach a 40 mm HK79 grenade launcher, as well as various telescopic sights, mounted through a Picatinny rail.
  • AG-3F2: An improvement of the AG-3F1.
  • Ak 4: Swedish-made version of the G3A3. The rifles were manufactured from 1965 to 1970 by both Carl Gustafs Stads Gevärsfaktori and Husqvarna Vapenfabrik and from 1970 until the end of production in 1985 - exclusively by Gevärsfaktori in Eskilstuna. Also produced with a Hensoldt 4x24 telescopic sight mounted via a HK claw mount, known as the Ak 4OR and the Ak 4B variant, which features an Aimpoint red-dot reflex sight in place of the standard iron sights and an increased rate of fire. All Ak 4's could mount the M203 grenade launcher.
  • DIO G3 Bullpup: Iranian bullpup variant of the G3. Photo
  • G3A7A1: Turkish-made variant of the G3A4.
  • G3P4: Pakistan Ordnance Factory designation for license produced G3A4 rifles.
Norwegian soldiers pictured with locally-built AG-3 rifles.
Norwegian soldiers pictured with locally-built AG-3 rifles.

[edit] Specialized G3 types

  • G3TGS: This is simply a G3 with a 40 mm HK79 under-barrel grenade launcher. TGS stands for Tragbares Granat System ("Portable Grenade System").
  • G3A3ZF: This is a rifle issued with a scope bracket and a scope. The ZF stands for Zielfernrohr or "Telescopic sight".
  • G3SG/1: An accurized variant of the G3. The "SG" stands for Scharfschützengewehr, or "Sharpshooting rifle". The rifles were individually selected from the production line for their accuracy and then modified. A Zeiss 1.5-6x variable power telescopic sight was added using a HK claw mount attached to the receiver. The stock was extended slightly compared to the standard G3 fixed stock and comes with a heavy, dual-stage buffer and adjustable cheek rest. A special set trigger group was added for a crisp trigger pull of 1 lb. Automatic fire was retained.
  • MSG3: a variant featuring the newer scope mount that is found on only a few of the Heckler & Koch rifles, as compared to the more conventional claw mounts, though the claw mounting points remain on the receiver. This newer scope mount does not allow the use of the open sights with the mount in place, as is the case with the more conventional claw mount.

[edit] Law enforcement and civilian models

  • HK41: The HK41 is a semi-automatic version of the G3 that was marketed to law-enforcement and civilian reservists (the prefix number 4 in HK's two-digit number system technically stands for "para-military rifle"). It differs only from the G3 in its trigger group, and because of the modularity of trigger packs it can easily be converted to a full-automatic weapon by swapping out several parts. Limited sales at home and US import restrictions and firearms regulations led this weapon to be dropped from HK's product line quickly and it was replaced by the HK91.
  • HK91: The HK91 is a semi-automatic version of the G3 similar to the HK41, also marketed to civilians. However, in order to comply with US firearm regulations a number of modifications to the HK91 were made that do not appear on the HK41. Internal parts that could allow fully automatic fire were removed. A shelf was welded onto the receiver where the push-pin of the trigger pack would normally go, to prevent installation of a fully automatic trigger pack. This did not allow the use of the paddle style magazine release and so a button on the right side of the magazine well is used instead. This was considered awkward by many owners. It is otherwise identical to the G3A3/A4. Importation into the United States began in 1974 and ceased in 1989, with some 48,000 rifles being imported.
A Latvian Army soldier in Iraq.
A Latvian Army soldier in Iraq.
  • HK911: The HK911 was an HK91A2 with the flash hider removed and the receiver re-stamped with an extra 1 to comply with the importation ban of 1989. The new designation theoretically made it legally immune to the Import Ban, as no "HK911" rifles were mentioned on the list of banned guns. However, the later banning of several "paramilitary" features on the HK911 made it illegal.
  • SR9: These variants of the HK91ZF were created to get around the Semi-Auto Import Ban of 1989, which included all variants of the HK91. They differed from the HK91 in that they had their flash hiders removed and featured a smooth forend that lacked the bipod attachment point. The SR9 series were banned from importation to the United States by President Clinton in 1997 because they could accept high-capacity magazines. The SR9 was an HK91A2ZF with the pistol grip and buttstock replaced with a one-piece thumbhole stock.
    • SR9 (T): The (T), or "Target", model was an HK91A2ZF with the trigger replaced with the PSG-1 model, the pistol grip replaced with an ergonomic PSG-1 grip and the buttstock replaced with an MSG90 model.
    • SR9 (TC): The (TC), ot "Target Competition", model was an HK91A2ZF with the trigger group, pistol grip and buttstock derived from the PSG-1.
  • G3A1: The terminology used by custom gunsmiths (e.g. Choate) and importers (e.g. Interarms) for weapons with an aftermarket side-folding stock. This is not part of official HK nomenclature.
  • HK 51: The HK51 is not made by HK, instead being a creation of the American custom after-market. The HK 51 has no real standards but is usually a cut down and modified G3A3 or its semi-automatic clones the HK41 and HK91 and modified to take MP5 furniture and accessories. It is usually fitted with a collapsible stock; 211 mm (8.31 in) barrel; it is 589 mm (23.17 in) in length with the stock retracted and 780 mm (30.72 in) with the stock extended.
  • PTR 91F: Additionally, JLD started manufacturing semi-automatic copies of the HK G3 called the PTR 91 in the United States. They used tooling from the HK arms factory in Portugal to build the rifles.

[edit] Users

Danish soldiers carrying the G3A5 variant.
Danish soldiers carrying the G3A5 variant.

[edit] Former

  • Flag of Colombia Colombia - Replaced by the Galil in 1993, both from IMI and Indumil.
  • Flag of Denmark Denmark - G3A5, as the Gevær Model 1966 (Gv M/66). Another variant, designated Gevær Model 1975 (Gv M/75), was leased from the German government. Almost all G3s in Danish service were replaced in the late 1990s by the Diemaco C7 rifle, designated Gv M/95, and the Diemaco C8 carbine, designated Gv M/96. Conscripts are sometimes still taught to operate the rifle, due to shortages of M/95 if the Total Defence force is to be activated. The Danish Home guard issued the Gv M/66 as late as 2006.
  • Flag of the Dominican Republic Dominican Republic
  • Flag of France France - Formerly made by MAS under a contract from HK.
  • Flag of Haiti Haiti
  • Flag of the Philippines Philippines
  • Flag of Sri Lanka Sri Lanka - Purchased a few thousand Pakistani-made G3A3s to fight against Tamil militants in the early 1980s and currently those rifles are being replaced by the Chinese Type 56.
  • Flag of Sweden Sweden - Made under license by Förenade Fabriksverken (FFV) as the Ak 4 (Automatkarbin 4). Two subvariants are known to exist, one equipped with a rail and Aimpoint sight (Ak 4B) and the other with a 4x magnifying optic (Ak 4OR). It has since been replaced by the Ak 5 (Automatkarbin 5; a lightly modified version of the FN FNC) in the regular army. It is still in use in the Hemvärnet ("Swedish Home Guard").
  • Flag of the United Kingdom United Kingdom - The G3KA4 is designated L100A1 by the British. These were most likely fabricated from receivers produced locally under license, along with G3A3/4s at the Royal Small Arms Factory, Enfield. They have now been phased out. However, they are still in use with CO19, the police armed response unit.
  • Flag of Rhodesia Rhodesia - Used by the Rhodesian army in select units, most notably by the Grey's Scouts during the Bush War.
  • Flag of South Africa South Africa - The rifle saw some use in the South African Border War.

[edit] Current

[edit] NATO

U.S. Marine with a G3.
U.S. Marine with a G3.

[edit] Non-NATO

Soldiers from the Portuguese Army, 2nd Mechanical Battalion in Bosnia-Herzegovina with INDEP-made G3's.
Soldiers from the Portuguese Army, 2nd Mechanical Battalion in Bosnia-Herzegovina with INDEP-made G3's.

[edit] Video Links

[edit] Books, Manuals, and Other Publications

[edit] References

  1. ^ http://www.eas.gr/index.php?lang=en&sec=7&cid=115
  2. ^ G3 – A4 AUTOMATIC INFANTRY RIFLE.
  3. ^ http://www.mic.sd/images/products/wepons/en/DINARbn.html

[edit] External links

Wikimedia Commons has media related to: