Hachure map

From Wikipedia, the free encyclopedia

Hachures are an older mode of representing relief. They show orientation of slope, and by their thickness and overall density they provide a general sense of steepness. Being non-numeric, they are less useful to a scientific survey than contours, but can successfully communicate quite specific shapes of terrain. They are a form of shading, although different from the one used in shaded maps. Hachure representation of relief was standardized by the Austrian topographer Johann Georg Lehmann in 1799[1]. Hachures may be combined with other ways of representing relief, like shades, the result being a shaded hachure map; an example of such maps are the Dufour maps of Switzerland[2]. Emil von Sydow designed maps with coloured hachures: green for lowlands and brown for highlands.

Dufour map of Bern (1907); this is a shaded hachure map.
Dufour map of Bern (1907); this is a shaded hachure map.
Hachure map depicting Cortes' invasion route of Mexico
Hachure map depicting Cortes' invasion route of Mexico

Contents

[edit] Overview

Hachures are strokes (short line segments or curves) drawn in the direction of the steepest slope (the aspect direction)[3]. Steeper slopes are represented by thicker, shorter and closer strokes, while gentler slopes are represented by thinner, longer and farther apart strokes. A very gentle slope or a flat area, like the top of a hill, are usually left blank. The hachures are traditionally monocolour, usually black, grey or brown; using two complementary colours for the hachures on a neutral background colour (e.g. black and white lines on grey map colour) would give a shading effect as if the relief were illuminated.

[edit] Rules

In representing relief with hachures on a map, six rules are to be followed, according to G.R.P. Lawrence (1979) [4]:

  1. The hachures are drawn in the direction of the steepest gradient.
  2. The hachures are arranged in rows perpendicular to their direction.
  3. The length and thickness of each stroke represents the drop in height along its direction: a short and thick stroke represents a short and steep slope, while a long and thin stroke represents a long and gentle slope.
  4. The strokes are spaced at an equal distance inside a row.
  5. The strokes have the same thickness inside a row.
  6. If the map is illuminated, strokes are thinner and farther apart on the illuminated side.


The Swiss cartographer Eduard Imhof set 5 similar rules[5]:

  1. Hachures follow the direction of steepest gradient
  2. Hachures are arranged in horizontal rows
  3. Hachure length corresponds to the local horizontal distance between assumed contours of a certain interval
  4. Hachure width is thicker for steeper slopes
  5. Hachure density remains constant throughout the map area.


If the illumination is vertical, rule 5 is kept; in the case of oblique illumination, it is dropped. The rules above are to be obeyed for large-scale maps. If the map being drawn is a small-scale map (less than 1:500 000 according to Imhof), rules may be relaxed in order to obtain a more suggestive representation.

[edit] References

  1. ^ Hillshading Alternatives with ArcGIS
  2. ^ Dufour Map from the The Federal Office of Topography of Switzerland
  3. ^ Hillshading Alternatives with ArcGIS
  4. ^ "The Guild Handbook of Scientific Illustration", 2nd edition, edited by Elaine R. S. Hodges, John Wiley and Sons, 2003 (rules are from G.R.P. Lawrence, "Cartographic Methods", 2nd edition, Methuen, 1979)
  5. ^ http://www.mbmg.mtech.edu/pdf/gis_hachuretxt.pdf Patrick J. Kennelly, A. Jon Kimerling, Desktop Hachure Maps from Digital Elevation Models (cites E. Imhof, Cartographic Relief Presentation, Berlin and New York: Walter de Gruyter, 1982)

[edit] External links