Guard tone

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (October 2007)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

This article may not meet the general notability guideline or one of the following specific guidelines for inclusion on Wikipedia: Biographies, Books, Companies, Fiction, Music, Neologisms, Numbers, Web content, or several proposals for new guidelines. If you are familiar with the subject matter, please expand or rewrite the article to establish its notability. The best way to address this concern is to reference published, third-party sources about the subject. If notability cannot be established, the article is more likely to be considered for redirection, merge or ultimately deletion, per Wikipedia:Guide to deletion.
This article has been tagged since October 2007.

Guard tone is a feature of wireline modems.

The guard tone is sent by the answering modem after it has sent the answer tone. It is a single continuous tone with a frequency of either 1800 Hz or 550 Hz, sent at a level of -6dB or -3dB, respectively, below the level of the transmitted data signal power.

It is used with V.22 and V.22bis modulation modes to prevent the high-band data signal from interfering with the operation of billing apparatus in certain countries where in-band signalling was commonplace in the 20th century.

1800 Hz is used in the UK and some Commonwealth countries, while 550 Hz is used in some Scandinavian countries. Guard tones are not used in North America.

The guard tone is controlled by the &G AT command of the Hayes command set.