Image:Gramme Ring - Modern Form.png

From Wikipedia, the free encyclopedia

[edit] Summary

Original text of illustration:

Figure 249: Modern form of the Gramme ring armature.

  • The core consists of a number of thin flat rings of well-annealed charcoal iron, the outer diameter of each ring or disc being 11.5 inches and its inner diameter 9.25 inches. Sheets of thin paper insulate each disc from its neighbors to prevent the flow of eddy currents.
  • The armature is mounted on a steel shaft to which is keyed a four-armed metal "spider", the extremes of whose arms fit into notches cut in the inner edges of the soft iron core rings, so that a good mechanical connection is obtained between the core and the shaft. The spider is made of a non-magnetic metal, to reduce the tendency to leakage of lines of force across the interior of the armature.
  • The armature inductors consist of cotton-covered copper wire of No. 9 standard wire gauge, wound around the core in one layer and offering a resistance, from brush to brush, of 0.048 ohm. There are two convolutions in each section, the adjacent ends of neighboring sections being soldered to radial lugs projecting from the commutator bars.

Public Domain source:

  • Hawkins Electrical Guide, Volume 1
  • Chapter 17: The Armature, Page 224.
  • Copyright 1917 by Theo. Audel & Co.
  • Printed in the United States

Scanned by Dale Mahalko, Gilman, WI, USA

DMahalko (talk) 22:01, 12 January 2008 (UTC)

[edit] Licensing

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current22:01, 12 January 20081,144×440 (90 KB)DMahalko (Talk | contribs) (== Summary == TBD '''Public Domain''' source: * Hawkins Electrical Guide, Volume 1, Page 224. * Copyright 1917 by Theo. Audel & Co. * Printed in the United States Scanned by Dale Mahalko, Gilman, WI, USA ~~~~ == Licensing == {{PD-US}} )

The following pages on the English Wikipedia link to this file (pages on other projects are not listed):