From Wikipedia, the free encyclopedia
Size of this preview: 473 × 600 pixelsFull resolution (1,775 × 2,250 pixels, file size: 164 KB, MIME type: image/png)
Description |
Godiva II critical assembly mounted on stand.
Description of the Field Geometry and the Godiva II Critical Assembly
The Godiva critical assembly is located in a building called a Kiva.[1] The Kiva is located on a canyon floor (Fig. 1)[2] and is 1/4 mile from the control room. Measurements were made along the road leading from the Kiva to the control room. The active material in the Godiva II assembly is made up of a bare mass of approximately 60 kg of enriched U235. The critical mass is a right circular cylinder 7 inches in diameter with a hemispherical dome, mounted on a triangular stand (Fig. 2).[3] The critical mass is surrounded by a wire screen cage 9 inches in diameter. The horizontal midplane of the critical mass is approximately 78-1/2 inches from the Kiva floor.[4] The electronic control circuitry occupies a position on the stand. There are numerous mechanisms and interlocks which provide a maximum degree of safety. No shielding is around the assembly itself, but the concrete Kiva (20-inch walls, 8-inch ceiling), the block house (Fig. 1), and the canyon walls create conditions that complicate "free air" measurements.[5]
Notes
- ↑ Kiva, the Indian name for a ceremonial house, is used for the building which houses the critical assemblies.
- ↑ Fig. 1 is Image:Godiva II location.png
- ↑ Fig. 2 is Image:Godiva II critical assembly.png
- ↑ The specific height above the floor is dependent upon whether the assembly mount is placed on casters.
- ↑ Engelke
References
|
Source |
from http://www.fas.org/sgp/othergov/doe/lanl/lib-www/la-pubs/00316018.pdf
|
Date |
May 1961
|
Author |
Morris J. Engelke; Edwin A. Bemis, Jr.; J. A. Sayeg
|
Permission
(Reusing this image) |
|
Specifically, this image comes from Los Alamos National Laboratory. LANL requires the following text be used when crediting images to it[1]:
Unless otherwise indicated, this information has been authored by an employee or employees of the University of California, operator of the Los Alamos National Laboratory under Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The U.S. Government has rights to use, reproduce, and distribute this information. The public may copy and use this information without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the Government nor the University makes any warranty, express or implied, or assumes any liability or responsibility for the use of this information.
|
|
|
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment |
current | 00:58, 29 February 2008 | 1,775×2,250 (164 KB) | Wikibob | |
File links
The following pages on the English Wikipedia link to this file (pages on other projects are not listed):