Glock pistol

From Wikipedia, the free encyclopedia

Glock

Glock 17 (recent production model)
Type Semi-automatic pistol
Place of origin Flag of Austria Austria
Service history
In service 1980–present
Used by See Users
Production history
Designer Gaston Glock
Designed 1980
Manufacturer Glock GmbH
Produced 1980–present
Variants See Variants
Specifications
Cartridge 9x19mm Parabellum
10mm Auto
.45 ACP
.40 S&W
.380 ACP
.357 SIG
.45 GAP
Action Short recoil operated, locked breech, tilting barrel
Feed system Box magazine, see Variants for capacities
Sights Fixed, adjustable, and illuminated night notch sights

Glock is the name of a family of semi-automatic pistols designed and produced by the Austrian company Glock GmbH from Deutsch-Wagram, founded in 1963 by engineer Gaston Glock to manufacture high-strength synthetic and steel components.

Contents

[edit] Development

In May 1980, the company was invited to bid on a contract to supply the Austrian military with a new duty pistol to replace the WWII-era Walther P38 service pistol. Samples were submitted for assessment trials and, after passing all of the exhaustive endurance and abuse tests, Glock emerged as the winner with the Glock 17 model. The handgun was adopted into service with the Austrian military and police forces in 1982 as the P80 (Pistole 80).[1] Shortly thereafter, the weapon was accepted into service with the Dutch, Norwegian and Swedish armed forces. The Glock 17 gave rise to a range of modified versions with alternative caliber chamberings, external dimensions and weights, all retaining the basic design elements. By 1992, some 350,000 pistols had been sold in more than 45 countries, including 250,000 in the USA.

[edit] Design details

The Glock 17 (so named because it was the 17th patent of the company)[1] is a 9x19mm semi-automatic pistol that uses a modified Browning locked breech short recoil operating principle.[2] The firearm’s locking mechanism has a vertically tilting barrel with a rectangular breech that engages a guide in the slide, on the breech face and a cut in the top front of the ejection port. The barrel recoils rearward, locked together with the slide approximately 3 mm (0.1 in) until the bullet leaves the barrel and pressure drops to a safe level. A ramped lug at the bottom of the barrel then engages an angled locking block in the frame, tilting the barrel downward while the slide continues back in a straight line.

The slide features a spring-loaded claw extractor and the stamped sheet-metal ejector is pinned to the subframe.[1] The striker firing mechanism has a spring-loaded firing pin that is cocked in two stages, powered by the firing pin spring. When the weapon is charged, the firing pin is in the half-cock position. As the trigger is pulled, the striker is fully cocked. At the end of its travel, the trigger bar is tilted downward by the disconnector, releasing the striker to fire the cartridge. The disconnector also resets the trigger bar so that the striker will be captured in half-cock at the end of the firing cycle. This is known as a pre-set trigger mechanism, referred to as the "Safe Action" trigger by the manufacturer. The disconnector also ensures the pistol can only fire in semi-automatic mode.

The Glock features a triple safety system that secures the weapon against accidental discharge and consists of three independent safety mechanisms: an external trigger safety[3] and two automatic internal safeties – a firing pin safety[4] and a drop safety[5]. The external safety is a small inner lever contained in the trigger. Pressing the lever activates the trigger bar and sheet metal connector. One of the internal safeties is a solid hardened steel pin which, in the secured state, blocks the firing pin channel (disabling the firing pin in its longitudinal axis). The firing pin safety is only pushed upward to release the firing pin for firing when the trigger is actuated and the safety is pushed up through the backward movement of the trigger bar, the second, drop safety guides the trigger bar in a precision safety ramp that is only released when a shot is triggered by pulling the trigger right back. The safeties are systematically disengaged one after another when the trigger is squeezed and then automatically re-activated when the trigger is released. This triple safety system guarantees safe handling of the pistol with a cartridge introduced into the chamber, reducing the time required to deploy the weapon. This allows the user to concentrate on tactical considerations, rather than manipulation of levers, hammers or external safeties found in other, conventional handguns.[1] However, in the case of a misfire this design provides no way to re-cock the striker without manipulating the slide and ejecting the dud round.

The Glock 17 feeds from a double-column box magazine with a 17-round capacity or an extended 19-round magazine. Magazines feature a steel body overmolded with plastic. A steel spring drives a plastic follower. After the last round has been fired, the slide remains open on the slide stop. The slide stop release lever is located on the left side of the frame directly beneath the slide and can be manipulated by the thumb of the shooting hand.

The Glock 17 has a fixed sight arrangement that consists of a ramped front sight and a notched rear sight with white contrast elements painted on for increased acquisition speed – a white dot on the front post and a rectangular border on the rear notch.[1] The rear sight can be adjusted for windage as it has a degree of lateral movement in the dovetail it is mounted in. Adjustable and illuminated night sights are also available.

The cold hammer-forged barrel has a polygonal (hexagonal) bore with a right-hand twist.[1] The weapon’s frame, magazine body and several other components are made from a high-strength nylon-based polymer. The frame also contains hardened steel guides molded into the internal surfaces. The slide is milled from a single block of ordnance-grade steel. The barrel and slide are finished with a proprietary nitriding process called Tenifer.

A Glock 19 field-stripped.
A Glock 19 field-stripped.

Current production Glock 17’s consist of 34 parts. For maintenance the pistol disassembles into 5 main groups: the barrel, slide, frame, magazine and recoil spring assembly.

The firearm is designed for the NATO-standard 9x19mm Parabellum pistol cartridge (bullet weight – 7.5 g, muzzle velocity – 350 m/s), but can also use high-power (increased pressure) +P and +P+ ammunition with either full metal jacket or jacketed hollow point projectiles.

The Glock was modernized several times throughout its production history. In 1991 a modified version of the recoil spring and recoil spring tube was introduced that is now a single integrated recoil spring assembly that does not disassemble. Additionally the magazine was slightly modified (the magazine floorplate was changed and the follower spring was fitted with a resistance insert at its base) and the trigger pull was increased (optionally). The factory standard trigger is rated at 25 N (5.6 lbf), but by using a modified connector it can be increased to 35 N (7.9 lbf). In response to a request made by American law enforcement agencies for a two-stage trigger Glock introduced the so-called NY (New York) trigger module, which features a flat spring in a plastic housing that replaces the trigger bar’s standard coil spring. This trigger upgrade is available in two versions: New York and New York Plus that are rated at 34 N (7.6 lbf) to 40 N (9.0 lbf) and 41 N (9.2 lbf) to 50 N (11.2 lbf) respectively, which require approximately 20 N (4.5 lbf) to 30 N (6.7 lbf) of force to disengage the safeties and another 10 N (2.2 lbf) in the second stage to fire a shot.

A mid-life upgrade to the Glock series involved the frame’s grip, which received checkering on the front strap and serrations to the rear (these pistols are sometimes called the generation 2 models). In the late 1990s the pistol’s frame was further modified with a Universal rail adapter (used to mount laser pointers and tactical flashlights), thumb rests on both sides of the frame and finger grooves on the front strap of the pistol grip (generation 3 upgrade). The extractor has also been changed twice and the locking block was enlarged along with the addition of another pin.[1]

The Glock pistol accessories include several devices for tactical illumination, such as front rail mounted lights with optional lasers and an adapter to mount a flashlight on the bottom of a magazine. Polymer holsters in various configurations and matching magazine pouches are also available. Glock also produces optional sights, triggers, recoil springs, slide stop levers, and underwater spring cups. Three open sight systems are produced.

In 2003, Glock announced the Internal Locking System (ILS) safety feature. The ILS is a manually activated lock that is located in the back of the pistol's grip. It is cylindrical in design and, according to Glock, each key is unique. When activated, the lock causes a tab to protrude from the rear of the grip giving both a visual and tactile indication as to whether the lock is engaged or not. When activated, the ILS renders the Glock unfireable as well as making it impossible to disassemble. When disengaged, the ILS adds no further safety mechanisms to the Glock pistol. The ILS is available as an option on most Glock pistols.

[edit] Variants

Following the introduction of the Glock 17, numerous variants and versions have been offered. Variants that differ in caliber, frame, and slide length are identified by different model numbers with the exception of the Glock 17L. Other changes not dealing with frame and slide length are identified with suffixes such as "C" which denotes compensated models. Minor options such as frame color, sights, and included accessories are identified by a separate model code on the box and do not appear anywhere on the firearm.

Glock pistols come in three main sizes, all modeled after the original full-size Glock 17. "Standard" full-size models are designed as duty weapons with a large magazine capacity. "Compact" models are a slightly smaller with reduced magazine capacity and lighter weight while maintaining a usable grip length. "Subcompact" models are designed for easier carry being lighter and shorter; subcompact models are intended to be used with two fingers on the grip below the trigger guard. .45 ACP and 10 mm models are slightly larger than smaller cartridge pistols and are not offered in the 'compact' size. Glock produces a special single-stack "Slimline" .45 ACP pistol, the Glock 36. "Competition" versions have longer barrels and slides, adjustable sights, and extended slide and magazine release.

Some Glock pistols are available as "C" models (for "compensated") which have slots cut in the barrel and slide to reduce muzzle climb.[6]

  • Glock 17C: Introduced in 1996 and incorporated slots cut in the barrel and slide to compensate for muzzle rise and recoil. Many other Glock pistols now come with this option, all with a "C" suffix on the slide.
  • Glock 17L: Introduced in 1988 and incorporates a longer slide and extended barrel. Initially the 17L had three holes in the top of the barrel and a corresponding slot in the slide, however later production pistols lack these holes. The Glock 17L is now discontinued.
  • Glock 17A: Variant produced with a 120 mm (4.7 in) extended barrel that protrudes from the slide visibly. It is intended for the Australian market to conform to local laws regarding barrel length created after the Monash University shooting and are supplied with 10-round magazines.[7][8]
  • Glock 17S: Glock 17 variant with an external, frame-mounted, manual safety. Small numbers of this variant were made for the Tasmanian, Israeli, Pakistani and perhaps several South American security forces.[9][10][11] They are stamped "17", not "17S". They resemble, but are distinguishable from, standard Glock 17s that have been fitted with the after-market Cominolli safety[12].
  • Glock 17T: Training pistol that fires paint or rubber rounds. There are two versions and they are both easily recognizable from their bright blue frames: the Glock 17T 9 mm FX, which fires Simunition FX cartridges and the Glock 17T 7.8x21 AC, which fires paint and rubber rounds with replaceable pressurized air cartridges.
  • Glock 17P: Training dummy for practicing hand-to-hand combat, loading and unloading of the pistol. The G17P is identical to a standard Glock 17 except for its red frame, an inert barrel (without a chamber, thus preventing the accidental chambering of a live cartridge) and no firing pin hole in the breech face (thus preventing someone from using a live barrel with the training slide).
  • Glock 17Pro: Version produced exclusively for the Finnish market. It has the following improvements over the standard Glock 17: factory tritium night sights, an extended, threaded barrel, marine spring cups, modified magazine release, extended slide release (factory standard in newer models), extended +2 magazine base plates, 3.5 lb force connector and factory Glock pouch.
  • Glock 17DK: Version for Denmark, where handguns must, by law, be at least 210 mm (8.3 in) long. The Glock 17DK has a 122.5 mm (4.8 in) barrel, making the pistol 210 mm (8.3 in) long overall.
The selective-fire Glock 18 machine pistol.
The selective-fire Glock 18 machine pistol.
  • Glock 18: Selective-fire variant of the Glock 17, developed at the request of the Austrian counter-terrorist unit EKO Cobra. The Glock 18 is not available to the civilian market. This machine pistol-class firearm has a lever-type fire-control selector switch, installed on the left side of the slide, in the rear, serrated portion (selector lever in the in the bottom position – continuous fire, top setting – single fire). The firearm is typically used with an extended 33-round capacity magazine. Early Glock 18’s were ported to reduce muzzle rise during automatic fire. Another compensated variant was also produced, known as the Glock 18C. It has a keyhole opening cut into the forward portion of the slide, not unlike the opening on the Glock long-slide models, although the G18 has a standard-length slide. The keyhole opening provides a venting area to allow the four, progressively-larger (from back to front) compensator cuts machined into the barrel to accomplish their job, which is to afford more control over the rapid-firing machine pistol. The compensator cuts, of varying widths start about halfway back on the top. The rear two cuts are narrow, while the front two cuts are wider. The slide is also hollowed, or dished-out in a rectangular pattern between the rear of the ejection port and the rear sight. The pistol’s rate of fire in fully automatic mode is approx. 1100-1200 rounds/min. Most of the other characteristics are similar to the Glock 17.
The compact Glock 19.
The compact Glock 19.
  • Glock 19: Effectively, a reduced-size Glock 17, called the “Compact” by the manufacturer. It was first produced in 1988, primarily for military and law enforcement. The Glock 19 has a barrel and pistol grip that are shorter by approx. 12 mm (0.5 in) compared to the Glock 17 and uses a 15-round magazine (the pistol remains compatible with standard and high-capacity factory magazines). To preserve the operational reliability of the short recoil system, the slide's mass was kept the same. With the exception of the slide, frame, barrel, locking block, recoil spring, guide rod and slide lock spring, all of the other components are interchangeable between the models 17 and 19. In 1990 the Glock 19 was accepted by the Swedish Army and entered service as the Pistol 88B.
  • Glock 20: Developed for American security forces and introduced in 1991. The pistol was designed from the ground up around the 10mm Auto cartridge, but can also fire Federal 10mm Auto FBI rounds with a reduced muzzle velocity. Due to the more powerful chambering, the pistol is dimensionally larger than the Glock 17, approx. 2.5 mm (0.1 in) wider and 7 mm (0.3 in) longer. Though many small parts interchange (close to 50% parts commonality), the major assemblies are scaled-up and do not interchange. The pistol’s bore has a hexagonal profile.
  • Glock 21: .45 ACP version of the Glock 20 designed primarily for the American market.[13] The barrel features an octagonal bore and the slide is lighter to compensate for the lower-energy cartridge. The Glock 21 magazine is of the single-position-feed, staggered-column type with a capacity of 13 rounds. The Glock 20 and 21 frames and slides are not compatible. The Glock 21’s locking block has been altered to prevent this. Glock has also released the Glock 21SF.[14] The suffix "SF" denotes "short frame" in that the front-to-rear profile of the grip has been reduced by about 5 mm (0.2 in). The pistol was originally designed to compete in the now canceled US Military trials for a new .45-caliber pistol to replace the Beretta M9. It features an ambidextrous magazine release and an optional MIL-STD-1913 rail system along with a reduction in the size of the grip. The Glock 21SF is currently available in three versions: one with a Picatinny rail and ambidextrous safety and two with a Universal Glock rail available with or without the ambidextrous safety. All current 10 mm and .45-caliber Glock magazines are all being made with ambidextrous magazine release cutouts at the front of the magazines.
  • Glock 22: .40 S&W version of the Glock 17 introduced in 1990. The pistol uses a modified slide, frame, barrel (hexagonal profile rifling with a right-hand twist).
  • Glock 23: .40 S&W version of the compact Glock 19. It is dimensionally identical to the Glock 19 but is slightly heavier and uses a modified slide, frame, .40 S&W barrel and 13-round magazine.
  • Glock 24: .40 S&W competition variant of the Glock 22 similar in concept to the target Glock 17L model. The Glock 24 was officially discontinued upon the release of the Glock 34 and 35.[15]
  • Glock 25: A derivative of the Glock 19, adapted to use the .380 ACP (9x17mm Short) cartridge. Due to the relatively weak cartridge, the pistol features an unlocked breech and operates via straight blowback of the slide. This method of operation required modification of the locking surfaces on the barrel as well as a redesign of the former locking block.
  • Glock 26: 9 mm "subcompact" variant designed for concealed carry and introduced in 1995, mainly for the civilian market. It features a small frame with a pistol grip that supports only two fingers, a short barrel, slide, and a 10-round double-stack magazine. More than a shortened Glock 19, design of the subcompact required extensive rework of the frame, locking block, and spring assembly.
A subcompact Glock 29 in the powerful 10mm Auto cartridge.
A subcompact Glock 29 in the powerful 10mm Auto cartridge.
  • Glock 27: .40 S&W version of the subcompact Glock 26, with 9-round, double-stack magazine.
  • Glock 28: .380-caliber subcompact version of the blowback-operated Glock 25.
  • Glock 29: 10mm Auto equivalent of the Glock 26 introduced along with the Glock 30 in 1997. The pistol has a 96 mm (3.8 in) barrel and a 10-round magazine.
  • Glock 30: .45 ACP version of the Glock 29. Glock has also announced the Glock 30SF as a short-frame counterpart to the Glock 21SF.[16]
  • Glock 31: .357 SIG (9x22mm) variant of the full-sized Glock 22. It features a polygonal (hexagonal) bore.
  • Glock 32: .357 SIG (9x22mm) variant of the compact Glock 23.
  • Glock 33: .357 SIG (9x22mm) variant of the subcompact Glock 26.
  • Glock 34: Competition version of the Glock 17. It is similar to the now-discontinued Glock 17L but with a slightly shorter slide and barrel than its predecessor. It was developed and produced in 1998 and features a 21 mm (0.8 in) longer barrel and slide. It also has an extended magazine release, extended slide stop lever, 20 N (4.5 lbf) trigger pull, and adjustable rear sight. The top of the slide is milled out, creating a hole designed to reduce front-end muzzle weight to better balance the pistol.[17]
The competition-oriented Glock 35.
The competition-oriented Glock 35.
  • Glock 35: .40 S&W version of the competition Glock 34.
  • Glock 36: "Slimline" version of the .45 ACP Glock 30 that features an ultra-compact frame and is chambered for the .45 ACP round; the barrel, slide, and magazine, are unique to the model. It has a 6-round capacity, and is the first Glock to be manufactured with a single-stack magazine.[18]
  • Glock 37: .45 GAP version of the Glock 17. It uses a wider, beveled slide, larger barrel and different magazine but is otherwise similar to the Glock 17. The Glock 37 first appeared in 2003 It was designed to offer the stopping power of the .45 ACP with the frame size of the Glock 17. The concern with the size of the Glock 20/21 has also been addressed by the Glock 36, 21SF, and 30SF all of which featured reduced-size frames.
The slim-frame Glock 36 in .45 ACP.
The slim-frame Glock 36 in .45 ACP.
  • Glock 38: .45 GAP version of the compact Glock 19. It was the first pistol to use Glock's newly designed .45 GAP cartridge.[19]
  • Glock 39: .45 GAP version of the subcompact Glock 26.
Model number Cartridge Total length Barrel length Magazine Capacity[20] Weight
(unloaded)		 Style
(mm) (in) (mm) (in) Standard Optional (g) (oz)
17, 17C 9x19mm 186 7.32 114 4.49 17 10, 19, 33 625 22 Standard
17L 225 8.86 153 6.02 17 10, 19, 33 670 23.6
18, 18C 185 7.28 114 4.49 33 10, 17, 19 620 21.9
19, 19C 174 6.85 102 4.01 15 10, 17, 19, 33 595 21 Compact
20, 20C 10mm Auto 193 7.60 117 4.61 15 10 785 27.7 Standard
21, 21C, 21SF .45 ACP 13 10 745 26.3
22, 22C .40 S&W 186 7.32 114 4.49 15 10, 17 650 22.9
23, 23C 174 6.85 102 4.01 13 10, 15, 17 600 21.2 Compact
24, 24C 225 8.86 153 6.02 15 10, 17 757 26.7 Competition
25 .380 ACP 174 6.85 102 4.01 15 17, 19 570 20.1 Compact
26 9x19mm 160 6.30 88 3.46 10 12, 15, 17, 19, 33 560 19.8 Subcompact
27 .40 S&W 9 11, 13, 17 560 19.8
28 .380 ACP 10 12, 15, 17, 19 529 18.7
29 10mm Auto 172 6.77 96 3.78 10 15 700 24.7
30, 30SF .45 ACP 10 9, 13 680 24
31, 31C .357 SIG 186 7.32 114 4.49 15 17 660 23.3 Standard
32, 32C 174 6.85 102 4.01 13 15, 17 610 21.5 Compact
33 160 6.30 88 3.46 9 11, 13, 15, 17 560 19.8 Subcompact
34 9x19mm 207 8.15 135 5.31 17 10, 19, 33 650 22.9 Competition
35 .40 S&W 15 10, 17 695 24.5
36 .45 ACP 172 6.77 96 3.78 6 - 570 20.1 Slimline
37 .45 GAP 189 7.44 116 4.56 10 - 735 25.9 Standard
38 174 6.85 102 4.01 8 10 685 24.2 Compact
39 160 6.30 88 3.46 6 8, 10 548 19.3 Subcompact
  • Glock pistols designated by a "C" after the model number are equipped with ported barrels and slides to compensate for muzzle rise.
  • Glock 25 or 28 pistols are not available to the general public in the United States, because a small pistol chambered for the .380 ACP cartridge does not meet the "sporting purposes" criteria for importation of pistols under the Gun Control Act of 1968, according to the BATFE's point system.[21]

[edit] Users

The popularity of Glock pistols can be attributed to a number of factors. They are said to be very reliable, being able to function under extreme conditions and to fire a wide range of ammunition types. The simplicity of the Glock design contributes to this reliability, as it contains a relatively small number of components (nearly half as many as the typical handgun) making maintenance and repair easy. Disassembly for the Glock pistol is simple, making it easy to detail strip without expensive tools.[34] The polymer frame makes them lighter than typical steel or aluminum-framed pistols, which is attractive for police officers and civilians who carry firearms for extended periods of time.

The popularity of Glock pistols seems to have inspired other manufacturers to begin production of similar polymer-framed firearms, including the Springfield XD, Smith & Wesson M&P, and Walther P99 pistols. The Smith & Wesson Sigma so closely resembled Glock's design that it resulted in a patent infringement lawsuit, with Smith & Wesson settling out of court and paying Glock an undisclosed amount.[35]

[edit] Notes

  1. ^ a b c d e f g Woźniak, Ryszard. Encyklopedia najnowszej broni palnej - tom 2 G-Ł. Bellona. 2001. pp45-50.
  2. ^ Glock 17 technical data on Glock.com. Retrieved on 2008-02-03.
  3. ^ Trigger Safety information on Glock.com. Retrieved on 2008-02-03.
  4. ^ Firing Pin Safety information on Glock.com. Retrieved on 2008-02-03.
  5. ^ Drop Safety information on Glock.com. Retrieved on 2008-02-03.
  6. ^ "C" Models on Glock.com. Retrieved on 2008-02-03.
  7. ^ Non-US Glocks: "Glock 17A" on GlockFAQ.com
  8. ^ Glock 17A photo on RPGFirearms.com.au
  9. ^ Glock with factory safety, www.glockfaq.com
  10. ^ Glock 17 with safety, www.thefiringline.com
  11. ^ http://glocktalk.com/forums/showthread.php?t=412093 Glocks with GL prefix and ZTD date code have manual safety, http://glocktalk.com
  12. ^ Cominolli Safety
  13. ^ Dougherty, Martin J. Small Arms From the Civil War to the Present Day, Amber Books Ltd. (2005), ISBN 13: 9780760763292.
  14. ^ "The New Glock 21SF 'Short Frame' Announced At SHOT Show 2007", GlockWorld
  15. ^ Glock Model Info: "Have any models been discontinued?" on GlockFAQ.com
  16. ^ "Glock, Inc. Introduces New Glock 30 SF .45 Auto Short Frame Pistol at SHOT Show in Las Vegas", International Business Times, February 2, 2008
  17. ^ Ayoob, Massad. "The Glock 34", Guns magazine, September 1999
  18. ^ Ayoob, Massad. "Glock 36 And Kahr P9: Slim, Light And Powerful", Shooting Industry, August 2000
  19. ^ James, Frank W. "The Glock Model 38", Handguns magazine
  20. ^ Glock magazine chart
  21. ^ Glock Model Info: "What is the BATF points system and how does it affect Glocks?" on GlockFAQ.com. Retrieved on 2008-02-03.
  22. ^ Rare & Collectible Glocks: "G17 with factory external safety (G17S?)" on GlockFAQ.com
  23. ^ "Arming of Front-Line Customs Officers" on Safeguarding Australia
  24. ^ http://www.bmlv.gv.at/waffen/waf_p80.shtml
  25. ^ http://www.defense.gouv.fr/terre/decouverte/materiels/materiels_specifiques/glock_17
  26. ^ http://www.mod.gov.lv/upload/nbsfakti.anglu.gala.pdf
  27. ^ SOJ.lt :: Lietuvos kariuomenė. Specialiųjų Operacijų Junginys (SOJ) "Aitvaras"
  28. ^ http://www.landmacht.nl/materieel/huidig_materieel/Manoeuvrematerieel/Glock_17__9mm.aspx
  29. ^ Komenda Główna Policji
  30. ^ Pistol 88 on SoldF.com (Unofficial Swedish Army Homepage)
  31. ^ Defendor AB, supplier
  32. ^ Ayoob, Massad. "Small Handgun Attitude", Guns magazine, May 2003
  33. ^ Ayoob, Massad. "9mm Dead?", American Handgunner, November - December 2004
  34. ^ Glock disassembly video on YouTube, May 31, 2006
  35. ^ Thurman, Russ. "Judge Dismisses Lawsuit Against Gunmaker, S&W and Glock Settle Suit", Shooting Industry, June, 1997

[edit] References

  • Boatman, Robert H. Living With Glocks : The Complete Guide to the New Standard in Combat Handguns . Paladin Press, Boulder. 2002. ISBN 1-58160-340-1.
  • Kasler, Peter Alan. Glock : The New Wave In Combat Handguns. Paladin Press, Boulder. 1992. ISBN 0-87364-649-5.
  • Sweeney, Patrick. The Gun Digest Book of the Glock: A Comprehensive Review : Design, History, Use. kp books, Iola. 2003. ISBN 0-87349-558-6.
  • Taylor, Robin. The Glock In Competition, 2nd edition. Taylor Press, Bellingham. 2005. ISBN 0-9662517-4-1.
  • (Polish) Woźniak, Ryszard (2001). "p. 45-50", Encyklopedia najnowszej broni palnej - tom 2 G-Ł. Warsaw, Poland: Bellona. ISBN 83-11-09310-5. 

[edit] External links

Wikimedia Commons has media related to:

[edit] Video links