Image:Glass O-ring joints.PNG
From Wikipedia, the free encyclopedia
No higher resolution available.
Glass_O-ring_joints.PNG (350 × 120 pixels, file size: 4 KB, MIME type: image/png)
| This is a file from the Wikimedia Commons. The description on its description page there is shown below.
|
[edit] Summary
Drawing of glass O-ring joints used for making laboratory glassware. Both sides of the joint are essentially equivalent. By putting them together in the direction of the arrows with an appropriately-sized O-ring placed in between in circular grooves on each joint (not shown on the joint on the left side for simplicity), they can be joined. They should be held together by a clamp. The O-ring can maintain a leak-tight seal between the joints.
H Padleckas created this image file in April-May 2006 especially for use in the article "Laboratory glassware" in Wikimedia. H Padleckas 13:55, 27 May 2006 (UTC)
[edit] Licensing
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 13:47, 27 May 2006 | 350×120 (4 KB) | H Padleckas | (Drawing of glass O-ring joints used for making laboratory glassware. ) |
File links
The following pages on the English Wikipedia link to this file (pages on other projects are not listed):
