Geophysical migration

From Wikipedia, the free encyclopedia

The introduction to this article provides insufficient context for those unfamiliar with the subject. Please help improve the article with a good introductory style.

Geophysical migration of seismic data is the correction of the flat-geological-layer assumption by a numerical, grid-based spatial convolution of the seismic data to account for dipping events (where geological layers are not flat). There are many approaches, such as the popular Kirchoff migration, but it is generally accepted that processing large spatial sections (aperatures) of the data at a time introduces fewer errors, and that depth migration is far superior to time migration with large dips and with complex salt bodies.

Basically, it repositions/moves the energy (seismic data) from the recorded locations to the locations with the correct common midpoint (CMP). While the seismic data is received at the proper locations originally (according to the laws of nature), these locations do not correspond with the assumed CMP for that location. Though stacking the data without the migration corrections yields a somewhat inaccurate picture of the subsurface, migration is preferred for better most imaging recorder to drill and maintain oilfields. This process is a central step in the creation of an image of the subsurface from active source seismic data collected at the surface, seabed, boreholes, etc., and therefore is used on industrial scales by oil and gas companies and their service providers on digital computers.

Explained in another way, this process attempts to account for wave dispersion from dipping reflectors and also for the spatial and directional seismic wave speed (heterogeneity) variations, which cause wavefields (modelled by ray paths) to bend, wave fronts to cross (caustics), and waves to be recorded at positions different from those that would be expected under straight ray or other simplifying assumptions. Finally, this process often attempts to also preserve and extract the formation interface reflectivity information imbedded in the seismic data amplitudes, so that they can be used to reconstruct the elastic properties of the geological formations (amplitude preservation, seismic inversion). There are a variety of migration algorithms, which can be classified by their output domain into the broad categories of Time Migration or Depth Migration, and Pre-Stack Migration or Post-Stack migration (orthogonal) techniques. Depth migration begins with time data converted to depth data by a spatial geological velocity profile. Post-Stack migration begins with seismic data which has already been stacked, and thus already lost valuable velocity analysis information.

Seismic Data Processing by Ozoogan Yilmaz

This article does not cite any references or sources. (August 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.