FPY

From Wikipedia, the free encyclopedia

FPY is an acroynm that refers to the business term First Pass Yield. It is defined as the number of units coming out of a process divided by the number of units going into that process over a specified period of time.

First Time Yield (FTY) is simply the number of good units produced divided by the number of total units going into the process. For example:

You have a process of that is divided into four sub-processes - A, B, C and D. Assume that you have 100 units entering process A. To calculate FTY you would:

1. Calculate the yield (number out of step/number into step) of each step. 2. Multiply these together.

For Example:

100 units enter A and 90 leave. The FTY for process A is 90/100 = .9

90 units go into B and 80 units leave. The FTY for process B is 80/90 = .89

80 units go into C and 75 leave. The FTY for C is 75/80 = .94

75 units got into D and 70 leave. The FTY for D is 70/75 = .93

The total process yield is equal to FTYofA * FTYofB * FTYofC * FTYofD or .9*.89*.94*.93 = .70.


You can also get the total process yield for the entire process by simply dividing the number of good units produced by the number going in to the start of the process. In this case, 70/100 = .70 or 70 percent yield.

First Time Yield Or First "Pass" Yield Is A Tool For Mearsuring The Amount Of Rework In A Given Process. It Is An Excellent Cost Of Quality Metric.

This business-related article is a stub. You can help by expanding it.

The First Time Yield calculation (FTY) considered only what went into a process step and what went out. First Pass Yield adds the consideration of rework.