Flying Scot (dinghy)
From Wikipedia, the free encyclopedia
Specifications Under Current Rules | |
Crew | 2–3 |
LOA | 5800 mm (19') |
LWL | 5600 mm (18' 6") |
Beam | 2000 mm (6' 9") |
Draft | 1200 mm (48") |
Hull weight (with fittings) | 385 kg (850 lb) |
Mast height (above deck) | 8600 mm (28') |
Main and Jib area | 17.65 m2 (191 ft2) |
Spinnaker area | 18.6 m2 (200 ft2) |
The Flying Scot is a day sailer dinghy used for pleasure sailing as well as racing throughout North America. The Flying Scot was designed in 1957 by Gordon K. (Sandy) Douglass who had already designed the Thistle and Highlander dinghies.
Over 5000 boats have been built, and races are held throughout the year in the USA and Canada by the Flying Scot Association and its local fleets. As a one-design, all Flying Scot boats are built to the same specifications and thus have equal chances in winning a race, no matter when the boat was built. This makes the boats especially appealing to amateur racing associations since this type of construction strives to eliminate variables other than the skill of the crew. The Flying Scot was inducted into the American Sailboat Hall of Fame in 1998.
The Flying Scot Association says, "The Scot's performance offers thrills to even the experienced sailor and provides for tight, competitive racing. There are more than 100 fleets racing Flying Scots in the USA and Canada. The Scot is normally raced with a crew of two or three, but can be single handed as well. The sail plan consists of main, jib and spinnaker. Simple rigging and uniform construction fosters tactical racing."
[edit] External links
- Flying Scot boat builder
- Flying Scot Sailing Association
- Flying Scot Fleets
- Flying Scot Racing, Parts, Schedules, Boats, and More...
- Flying Scot South, Factory Authorized Rep. TX, OK, AR, KS, NM
- Flying Scot South FREE Used Boat Classified Listings and Forum