Floyd Rose SpeedLoader

From Wikipedia, the free encyclopedia

Floyd Rose SpeedLoader Tremolo
Floyd Rose SpeedLoader Tremolo

Floyd Rose SpeedLoader is a floating, double-locking, guitar bridge based on the Floyd Rose Original. It was in development since 1991 and was introduced to the public in 2003. It inherited the locking floating bridge principle from the original version, but improved usability and diminished most of disadvantages that the Floyd Rose Original was criticized for. The Floyd Rose SpeedLoader is available in both Tremolo and Fixed Bridge forms.

Floyd Rose SpeedLoader Fixed Bridge
Floyd Rose SpeedLoader Fixed Bridge

[edit] Differences from the Floyd Rose Original

The SpeedLoader bridges differ from the original 1977 bridges in that the procedure for changing strings has been made easier. The original string replacement procedure involved cutting the ball-end from a new guitar string, "locking" the freshly-cut end into the bridge using an Allen wrench, winding and rough tuning the string the using the machine head, locking the string at the nut (the second lock of the double-locking system), and finally tuning it utilizing the fine tuners. When old strings are replaced with new strings, the tension provided on the floating bridge becomes slightly different, meaning that adjusting the tuning of one string with its machine head will undoubtedly alter the tuning of the other strings. During the process of rough tuning a Floyd Rose equipped guitar, the locking nut is usually left unlocked throughout the entire string replacement procedure, which facilitates adjusting the tuning of all the strings using the machine heads.

However, the SpeedLoader bridge utilizes specially-manufactured strings. The strings are pre-cut to the perfect length (to sound at the right pitch when installed) and have special ends which snap into the bridge and nut. Once the replacement strings are in place, fine-tuning is performed in a fashion similar to the Floyd Rose Original bridge. The process for changing strings is simpler and faster; trained guitar technicians are able to change all 6 strings in under 30 seconds.

Consequently, guitars with Floyd Rose SpeedLoader bridges don't need any machine heads at all. For example, Floyd Rose Redmond series guitars come with a purely decorative headstock - unlike, for example, the Steinberger instruments without any visible headstock.

As with any guitar, ambient temperature, humidity, and string wear can affect the tuning. If the fine tuners alone are not enough to tune guitar properly, the SpeedLoader bridge has range tuning screws, one for each string, that control the range of each fine tuner's action.

Like the original Floyd Rose bridge, the SpeedLoader bridge is a truly "floating" bridge and has some of the same disadvantages associated with it. Often, to alleviate these disadvantages, Floyd Rose Original owners utilize a custom mechanism called a tremstopper that is able to lock the floating tremolo fully (or partially) and make it behave like a fixed bridge. The Floyd Rose SpeedLoader Tremolo includes a built-in tremstopper.

Finally, according to multiple interviews, Floyd Rose Guitars would not license manufacturing of these bridges to third-party vendors, as previous experience with Floyd Rose Licensed bridges showed that such "licensed" bridges can't match original standards of quality.

[edit] Advantages

[edit] Disadvantages

  • The most criticized disadvantage of new tremolo system is a requirement of special strings with bulleted ends. Strings should be precisely cut and should not stretch (so called "string float") non-elastically much from original length with applied tension, changing the pitch. String should be perfectly elastic in the range of Floyd Rose action. All these requirements make string manufacturing harder than normal, thus, generally, prices for such strings tend to be higher. So far, only 2 major string manufacturers produce such special strings: Floyd Rose Guitars itself and Dean Markley. The other factor is string availability: it's virtually impossible to find such strings on sale in some regions, and prices for such rare imported goods may go up to 400-500%. Finally, if speedloader string breaks, it must be replaced completely - one cannot just shift and re-use the rest of string length as is sometimes possible do with other bridges.
  • Price. As of 2005, Floyd Rose SpeedLoader bridges are approximately $40-50 (or about 20-30%) more expensive than Floyd Rose bridges - though, this difference should gradually diminish over next several years.
  • As of 2005, no low-profile and left-handed versions of SpeedLoader bridges exist, though they are announced to be available later.