Finite impulse response
From Wikipedia, the free encyclopedia
A finite impulse response (FIR) filter is a type of a digital filter. The impulse response, the filter's response to a Kronecker delta input, is 'finite' because it settles to zero in a finite number of sample intervals. This is in contrast to infinite impulse response filters which have internal feedback and may continue to respond indefinitely. An Nth order FIR filter has a response to an impulse that is N+1 samples in duration.
Contents |
[edit] Discussion
This article or section reads like a textbook and may need a cleanup. Please help to improve this article to make it neutral in tone and meet Wikipedia's quality standards. |
We start the discussion by stating the difference equation which defines how the input signal is related to the output signal
where x[n] is the input signal, y[n] is the output signal and bi are the filter coefficients. N is known as the filter order; an Nth-order filter has (N + 1) terms on the right-hand side; these are commonly referred to as taps.
The previous equation can also be expressed as a convolution of filter coefficients and the input signal.
To find the impulse response we set
where δ[n] is the Kronecker delta impulse. The impulse response for an FIR filter is the set of coefficients bn, as follows
for to .
The Z-transform of the impulse response yields the transfer function of the FIR filter
FIR filters are clearly bounded-input bounded-output (BIBO) stable, since the output is a sum of a finite number of finite multiples of the input values, so can be no greater than times the largest value appearing in the input.
[edit] Properties
An FIR filter has a number of useful properties which sometimes make it preferable to an infinite impulse response filter. FIR filters:
- Are inherently stable. This is due to the fact that all the poles are located at the origin and thus are located within the unit circle.
- Require no feedback. This means that any rounding errors are not compounded by summed iterations. The same relative error occurs in each calculation.
- They can be designed to be linear phase, which means the phase change is proportional to the frequency. This is usually desired for phase-sensitive applications, for example crossover filters, and mastering, where transparent filtering is adequate.
[edit] Filter design
To design a filter means to select the coefficients such that the system has specific characteristics. The required characteristics are stated in filter specifications. Most of the time filter specifications refer to the frequency response of the filter. There are different methods to find the coefficients from frequency specifications:
- Window design method
- Frequency Sampling method
- Weighted least squares design
- Minimax design
- Equiripple design. The Remez exchange algorithm is commonly used to find an optimal equiripple set of coefficients. Here the user specifies a desired frequency response, a weighting function for errors from this response, and a filter order N. The algorithm then finds the set of (N + 1) coefficients that minimize the maximum deviation from the ideal. Intuitively, this finds the filter that is as close as you can get to the desired response given that you can use only (N + 1) coefficients. This method is particularly easy in practice since at least one text[1] includes a program that takes the desired filter and N, and returns the optimum coefficients.
Software packages like MATLAB, GNU Octave and Scilab provide convenient ways to apply these different methods.
Some of the time, the filter specifications refer to the time-domain shape of the input signal the filter is expected to "recognize". The optimum matched filter is to sample that shape and use those samples directly as the coefficients of the filter -- giving the filter an impulse response that is the time-reverse of the expected input signal.
[edit] Moving-average example
A moving-average filter is a very simple FIR filter. The filter coefficients are found via the following equation:
- for
To provide a more specific example, we select the filter order:
The impulse response of the resulting filter is:
The following figure shows the block diagram of such a second-order moving-average filter.
To discuss stability and spectral topics we take the z-transform of the impulse response:
The following figure shows the pole-zero diagram of the filter. Two poles are located at the origin, and two zeros are located at ,
The frequency response, for frequency ω in radians per sample, is:
The following figure shows the absolute value of the frequency response. Clearly, the moving-average filter passes low frequencies with a gain near 1, and attenuates high frequencies. This is a typical low-pass filter characteristic. Frequencies about π are aliases of the frequencies below π, and are generally ignored or filtered out it reconstructing a continuous-time signal.
The following figure shows the phase response.
[edit] References
- ^ Rabiner, Lawrence R., and Gold, Bernard, 1975: Theory and Application of Digital Signal Processing (Englewood Cliffs, New Jersey: Prentice-Hall, Inc.) ISBN 0139141014
[edit] See also
- Electronic filter
- Filter (signal processing)
- Infinite impulse response (IIR) filter
- Z-transform (specifically Z-transform#Linear_constant_coefficient_difference_equation)
- Filter design
- Cascaded Integrator-Comb Filter