FHWA Series fonts
From Wikipedia, the free encyclopedia
 Shown: Series "D" |
|
| Typeface | FHWA Series fonts |
|---|---|
| Category | Sans-serif |
| Designer(s) | Ted Forbes |
| Foundry | N/A |
| Sample | |
 |
|
The FHWA Series fonts (often informally referred to as Highway Gothic) are a set of sans-serif typefaces developed by the United States Federal Highway Administration and used for road signage in the U.S., Canada, Australia, Spain, The Netherlands and New Zealand. The fonts were created to maximize legibility at a distance and at high speed. They are officially defined by the FHWA's "Standard Alphabets for Traffic Control Devices", originally published in 1945 (reprinted 1952). Changes to the specifications were published in 1966, 1977, and 2000. The 2000 specifications differ from earlier versions in the shapes of a few letters and in the inclusion of lowercase letters for all alphabet series.
The set consists of seven fonts: "A" (the narrowest), "B", "C", "D", "E", "E(M)" (a modified version of "E" with wider strokes), and "F" (the widest). Series "A" has been officially discontinued in the U.S. though it continues to be specified for certain signs in New Zealand. The fonts originally included only uppercase letters, with the exception of "E(M)", which was used on large expressway and freeway guide signs. In 2004, the FHWA published lowercase letters for all of the typefaces and made changes to the Manual on Uniform Traffic Control Devices allowing their use.[1]
FHWA Series A, B, C, D, E, and F were developed by the Public Roads Administration (which later became FHWA) during World War II. Draft versions of these typefaces were used in 1942 for signs on the Pentagon road network.[2] In 1949-50, as part of a research program into freeway signing carried out by the California Department of Transportation, Series E Modified was developed from Series E by thickening the stroke width to accommodate button reflectors for ground-mounted signs, while a lowercase alphabet was developed to allow mixed-case legend (consisting initially of Series D and lowercase letters) to be used on externally illuminated overhead signs.[3] The lowercase letters, paired with Series E Modified, later became the basis of a national standard for mixed-case legend on freeway guide signs with the 1958 publication of the AASHO signing and marking manual for Interstate highways.
Over the next few decades, the new Clearview typeface, also specifically developed for use on traffic signs, is expected to replace the FHWA series on some new signage.[4]
The FHWA typefaces are also used in Canada, Peru (under different series labels), Australia, New Zealand, the Netherlands, and other countries. Still others, including Spain and Mexico, use typefaces which are either derived directly from the FHWA series or very similar in appearance.
Typically, one or two-digit Interstate, U.S. Highway, and U.S. state route signs use the Series D font for the numbers, while signs with three or more digits use either a narrower font (Series B or C) or have smaller numbers in the Series D font. Series F is most commonly used on U.S. speed limit signs, although older signs often use narrower fonts.
In the mid-1990s the FHWA series of typefaces was used as a source of inspiration for a multi-weight print typeface designed by Tobias Frere-Jones of Font Bureau. Frere-Jones made accommodations for smaller print reproduction and Font Bureau released the face under the name Interstate. It has been adopted by many companies for branding; for example, NBC uses it for NBC Sports captions, and TV Guide uses the typeface on its cover. Also, The Weather Channel has utilized this typeface extensively, both on their weather maps and for their local forecasts.
[edit] Samples
FHWA Series B
FHWA Series C
FHWA Series D
FHWA Series E
FHWA Series F
[edit] See also
[edit] References
- ^ Moeur, Richard (2005-04-22). Sign Typefaces (English). Manual of Traffic Signs. Retrieved on 2006-05-18.
- ^ Loutzenheiser, D.W. "Design of signs for the Pentagon road network." Proceedings of the Highway Research Board, 1943, pp. 206-235.
- ^ Forbes, Theodore W., Moskowitz, Karl, and Morgan, Glen. "A comparison of lower case and capital letters for highway signs." Proceedings of the Highway Research Board, 1950, pp. 355-373.
- ^ Yaffa, Joshua. The Road to Clarity. New York Times Magazine. August 11, 2007. [1]. URL accessed 11 August 2007.
[edit] External links
- Standard Alphabets for Traffic Control Devices from the United States Federal Highway Administration (PDF)
- Sign Typefaces from the Manual of Traffic Signs
- Fonts Used On Road Signs In The USA and Canada
[edit] Downloadable versions
- Roadgeek Fonts - freeware fonts, created by Mike Adams and based on all of Series B through F, plus additional fonts based on highway signage around the world.
|
|||||||||||||||||||
