Image:Fender Lead I Electronics.jpg

From Wikipedia, the free encyclopedia

Wikimedia Commons logo This is a file from the Wikimedia Commons. The description on its description page there is shown below.
Commons is a freely licensed media file repository. You can help.
Description

A photograph taken of the back of the shielded pickguard on a 1981 Fender Lead I. This picture shows the pickup, two switches (with the red backs), volume, tone, and output jack. One switch is a 3 way Single/Humbucker/Single pickup switch, and the other changes between a parallel and a series circuit for the humbucker position. There are also two grounding wires shown on the bottom left; one goes to the bridge, and the other appears to go to shielding beneath the routing.
Source

Originally from en.wikipedia; description page is/was here.
Date

2007-02-11 (original upload date)
Author

Original uploader was Mispeled at en.wikipedia
Permission
(Reusing this image)
Public domain This image has been (or is hereby) released into the public domain by its author, Mispeled at the English Wikipedia project. This applies worldwide.

In case this is not legally possible:
Mispeled grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.


File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current12:59, 1 June 2007888×625 (110 KB)Rottweiler ({{Information |Description=A photograph taken of the back of the shielded pickguard on a 1981 Fender Lead I. This picture shows the pickup, two switches (with the red backs), volume, tone, and output jack. One switch is a 3 way Single/Humbucker/Single pic)
The following pages on the English Wikipedia link to this file (pages on other projects are not listed):