Fax

From Wikipedia, the free encyclopedia

For other uses, see Fax (disambiguation).
Look up facsimile in Wiktionary, the free dictionary.
A Samsung fax machine
A Samsung fax machine

Fax (short for facsimile, from Latin fac simile, "make similar", i.e. "make a copy") is a telecommunications technology used to transfer copies (facsimiles) of documents, especially using affordable devices operating over the telephone network. The word telefax, short for telefacsimile, for "make a copy at a distance", is also used as a synonym. Although fax is not an acronym, it is often erroneously written as such (“FAX”). The device is also known as a telecopier in certain industries. When sending documents to people at large distances, faxes have a distinct advantage over postal mail in that the delivery is nearly instantaneous, yet its disadvantages in quality have relegated it to a position beneath email as the prevailing form of electronic document transferral.

Contents

[edit] Overview

A "fax machine" usually consists of an image scanner, a modem, and also offered as options for many high-volume workgroup printers and photocopiers.

Although devices for transmitting printed documents electrically have existed, in various forms, since the mid to late 19th century (see "History" below), modern fax machines became feasible only in the mid-1970s as the sophistication increased and cost of the three underlying technologies dropped. Digital fax machines first became popular in Japan, where they had a clear advantage over competing technologies like the teleprinter, since at the time (before the development of easy-to-use input method editors) it was faster to handwrite kanji than to type the characters. Over time, faxing gradually became affordable, and by the mid-1980s, fax machines were very popular around the world.

Although many businesses still maintain some kind of fax capability, the technology has faced increasing competition from Internet-based systems. However, fax machines still retain some advantages, particularly in the transmission of sensitive material which, due to mandates like Sarbanes-Oxley and HIPAA, cannot be sent over the Internet unencrypted. In some countries, because digital signatures on contracts are not recognized by law while faxed contracts with copies of signatures are, fax machines enjoy continuing popularity in business.

In many corporate environments, standalone fax machines have been replaced by "fax servers" and other computerized systems capable of receiving and storing incoming faxes electronically, and then routing them to users on paper or via secure email. Such systems have the advantage of reducing costs by eliminating unnecessary printouts and reducing the number of inbound analog phone lines needed by an office.

[edit] Capabilities

There are several different indicators of fax capabilities: Group, class, data transmission rate, and conformance with ITU-T (formerly CCITT) recommendations.

Fax machines utilize standard PSTN lines and telephone numbers.

[edit] Group

[edit] Analog

Group 1 and 2 faxes were sent in the same manner as a frame of analog television, with each scanned line transmitted as a continuous analog signal. Horizontal resolution depended upon the quality of the scanner, transmission line, and the printer. Analog fax machines are obsolete and no longer manufactured. ITU-T Recommendations T.2 and T.3 were withdrawn as obsolete in July 1996.

  • Group 1 faxes conform to the ITU-T Recommendation T.2. Group 1 faxes take six minutes to transmit a single page, with a vertical resolution of 98 scan lines per inch. Group 1 fax machines are obsolete and no longer manufactured.
  • Group 2 faxes conform to the ITU-T Recommendations T.30 and T.3. Group 2 faxes take three minutes to transmit a single page, with a vertical resolution of 100 scan lines per inch. Group 2 fax machines are almost obsolete, and are no longer manufactured. Group 2 fax machines can interoperate with Group 3 fax machines.

[edit] Digital

Group 3 and 4 faxes are digital formats, and take advantage of digital compression methods to greatly reduce transmission times.

  • Group 3 faxes conform to the ITU-T Recommendations T.30 and T.4. Group 3 faxes take between six and fifteen seconds to transmit a single page (not including the initial time for the fax machines to handshake and synchronize). The horizontal and vertical resolutions are allowed by the T.4 standard to vary among a set of fixed resolutions:
    • Horizontal: 100 scan lines per inch
      • Vertical: 100 scan lines per inch
    • Horizontal: 200 or 204 scan lines per inch
      • Vertical: 100 or 98 scan lines per inch ('Standard')
      • Vertical: 200 or 196 scan lines per inch ('Fine')
      • Vertical: 400 or 391 (note not 392) scan lines per inch ('Superfine')
    • Horizontal: 300 scan lines per inch
      • Vertical: 300 scan lines per inch
    • Horizontal: 400 or 408 scan lines per inch
      • Vertical: 400 or 391 scan lines per inch ('Ultrafine')
  • Group 4 faxes conform to the ITU-T Recommendations T.563, T.503, T.521, T.6, T.62, T.70, T.72, T.411 to T.417. They are designed to operate over 64 kbit/s digital ISDN circuits. Their resolution is determined by the T.6 recommendation, which is a superset of the T.4 recommendation.

Fax Over IP (FOIP) can transmit and receive pre-digitized documents at near realtime speeds. Scanned documents are limited to the amount of time the user takes to load the document in a scanner and for the device to process a digital file. The resolution can vary from as little as 150 DPI to 9600 DPI or more. This type of faxing is not like the e-mail to fax service that still uses fax modems at least one way.

[edit] Class

Computer modems are often designated by a particular fax class, which indicates how much processing is offloaded from the computer's CPU to the fax modem.

  • Class 1 fax devices do fax data transfer where the T.4/T.6 data compression and T.30 session management are performed by software on a controlling computer. This is described in ITU-T recommendation T.31.
  • Class 2 fax devices perform T.30 session management themselves, but the T.4/T.6 data compression is performed by software on a controlling computer. The relevant ITU-T recommendation is T.32.
  • Class 2.1 fax devices are referred to as "super G3"; they seem to be a little faster than the other 2 classes.
  • Class 3 fax devices are responsible for virtually the entire fax session, given little more than a phone number and the text to send (including rendering ASCII text as a raster image). These devices are not common.

[edit] Data transmission rate

Several different telephone line modulation techniques are used by fax machines. They are negotiated during the fax-modem handshake, and the fax devices will use the highest data rate that both fax devices support, usually a minimum of 14.4 kbit/s for Group 3 fax.

ITU Standard Released Date Data Rates (bit/s) Modulation Method
V.27 1988 4800, 2400 PSK
V.29 1988 9600, 7200, 4800 QAM
V.17 1991 14400, 12000, 9600, 7200 TCM
V.34 1994 28800 QAM
V.34bis 1998 33600 QAM

Note that 'Super Group 3' faxes use V.34bis modulation that allows a data rate of up to 33.6 kbit/s.

[edit] Compression

As well as specifying the resolution (and allowable physical size of the image being faxed), the ITU-T T.4 recommendation specifies two compression methods for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image. The two methods are:

[edit] Modified Huffman

Modified Huffman (MH) is a codebook-based run-length encoding scheme optimised to efficiently compress whitespace. As most faxes consists mostly of white space, this minimises the transmission time of most faxes. Each line scanned is compressed independently of its predecessor and successor.

[edit] Modified Read

Modified Read (MR) encodes the first scanned line using MH. The next line is compared to the first, the differences determined, and then the differences are encoded and transmitted. This is effective as most lines differ little from their predecessor. This is not continued to the end of the fax transmission, but only for a limited number of lines until the process is reset and a new 'first line' encoded with MH is produced. This limited number of lines is to prevent errors propagating throughout the whole fax, as the standard does not provide for error-correction. MR is an optional facility, and some fax machines do not use MR in order to minimise the amount of computation required by the machine. The limited number of lines is two for 'Standard' resolution faxes, and four for 'Fine' resolution faxes.

The ITU-T T.6 recommendation adds a further compression type of Modified Modified READ (MMR), which simply allows for a greater number of lines to be coded by MR than in T.4. This is because T.6 makes the assumption that the transmission is over a circuit with a low number of line errors such as digital ISDN. In this case, there is no maximum number of lines for which the differences are encoded.

[edit] Matsushita Whiteline Skip

A proprietary compression scheme employed on Panasonic fax machines is Matsushita Whiteline Skip (MWS). It can be overlaid on the other compression schemes, but is operative only when two Panasonic machines are communicating with one another. This system detects the blank scanned areas between lines of text, and then compresses several blank scan lines into the data space of a single character.

[edit] Typical characteristics

Group 3 fax machines transfer one or a few printed or handwritten pages per minute in black-and-white (bitonal) at a resolution of 100x200 or 200x200 dots per inch. The transfer rate is 14.4 kilobits per second (kbit/s) or higher for modems and some fax machines, but fax machines support speeds beginning with 2400 bit/s and typically operate at 9600 bit/s. The transferred image formats are called ITU-T (formerly CCITT) fax group 3 or 4.

The most basic fax mode transfers black and white only. The original page is scanned in a resolution of 1728 pixels/line and 1145 lines/page (for A4). The resulting raw data is compressed using a modified Huffman code optimized for written text, achieving average compression factors of around 20. Typically a page needs 10 s for transmission, instead of about 3 minutes for the same uncompressed raw data of 1728×1145 bits at a speed of 9600 bit/s. The compression method uses a Huffman codebook for run lengths of black and white runs in a single scanned line, and it can also use the fact that two adjacent scanlines are usually quite similar, saving bandwidth by encoding only the differences.

Fax classes denote the way fax programs interact with fax hardware. Available classes include Class 1, Class 2, Class 2.0 and 2.1, and Intel CAS. Many modems support at least class 1 and often either Class 2 or Class 2.0. Which is preferrable to use depends on factors such as hardware, software, modem firmware, and expected use.

Fax machines from the 1970s to the 1990s often used direct thermal printers as their printing technology, but since the mid-1990s there has been a transition towards thermal transfer printers, inkjet printers and laser printers.

One of the advantages of inkjet printing is that inkjets can affordably print in color; therefore, many of the inkjet-based fax machines claim to have color fax capability. There is a standard called ITU-T30e for faxing in color; unfortunately, it is not yet widely supported, so many of the color fax machines can only fax in color to machines from the same manufacturer.

[edit] Fax paper

As a security precaution, thermal fax paper is typically not admissible as evidence in a court of law unless photocopied. This is because the ink used on fax papers are delible, brittle and tend to come off over long periods of storage.[citation needed]

[edit] Alternatives

One popular alternative is to subscribe to an internet fax service. Fax service providers allow users to send and receive faxes from their personal computers using an existing email account. No software, fax server or fax machine is needed. Faxes are received as attached .TIF or .PDF files, or in proprietary formats that require the use of the service provider's software. Faxes can be sent or retrieved from anywhere at any time that a user can get internet access. Some services even offer secure faxing to comply with stringent HIPAA and Gramm-Leach-Bliley Act requirements to keep medical information and financial information private and secure. Utilizing a fax service provider does not require paper, a dedicated fax line, or consumables.

Another alternative to a physical fax machine is to make use of computer software which allows people to send and receive faxes using their own computers. See Fax server and Unified messaging.

[edit] History

Scottish inventor Alexander Bain is often credited with the first fax patent in 1843. He used his knowledge of electric clock pendulums to produce a back-and-forth line-by-line scanning mechanism.

Frederick Bakewell made several improvements on Bain's design and demonstrated the device at the 1851 Great Exhibition in London.

In 1861, the first fax machine, the Pantelegraph, was sold by Giovanni Caselli, even before the invention of workable telephones.

As a designer for the Radio Corporation of America (RCA), in 1924, Richard H. Ranger invented the wireless photoradiogram, or transoceanic radio facsimile, the forerunner of today’s "Fax" machines. A photograph of President Calvin Coolidge sent from New York to London on November 29, 1924 became the first photo picture reproduced by transoceanic radio facsimile. Commercial use of Ranger’s product began two years later. Radio fax is still in common use today for transmitting weather charts and information. Also in 1924, Herbert E. Ives of AT&T transmitted and reconstructed the first color facsimile, using color separations.

An early method for facsimile transmission, the Hellschreiber, was invented in 1929 by Rudolf Hell, a pioneer in mechanical image scanning and transmission.

Prior to the introduction of the once-ubiquitous fax machine, one of the first being the Exxon Qwip in the mid-1970s, facsimile machines worked by optical scanning of a document or drawing spinning on a drum. The reflected light, varying in intensity according to the light and dark areas of the document, was focused on a photocell so that the current in a circuit would vary with the amount of light. This current was used to control a tone generator (a modulator), the current determining the frequency of the tone produced. This audio tone was then transmitted using an acoustic coupler (a speaker, in this case) attached to the microphone of a common telephone handset. At the receiving end, a handset’s speaker was attached to an acoustic coupler (a microphone), and a demodulator converted the varying tone into a variable current which controlled the mechanical movement of a pen or pencil to reproduce the image on a blank sheet of paper on an identical drum rotating at the same rate. A pair of these expensive and bulky machines could only be afforded by companies with a serious need to communicate drawings, design sketches or signed documents between distant locations, such as an office and factory.

In 1985, Dr. Hank Magnuski, founder of GammaLink, produced the first computer fax board, called GammaFax.

[edit] See also

Look up fax, facsimile in Wiktionary, the free dictionary.

[edit] External links