Erlangen program
From Wikipedia, the free encyclopedia
An influential research program and manifesto was published in 1872 by Felix Klein, under the title Vergleichende Betrachtungen über neuere geometrische Forschungen. This Erlangen Program (Erlanger Programm) — Klein was then at Erlangen — proposed a new kind of solution to the problems of geometry of the time.
At the time, geometry contained a very large number of theorems. Under the influence of synthetic geometry, the emphasis was still on proving theorems from sets of axioms, on the model of Euclidean geometry that had held good for two millennia. What Klein suggested was innovative in two ways:
- Firstly, he proposed that group theory, a branch of mathematics that uses algebraic methods to abstract the idea of symmetry, was the most useful way of organizing geometrical knowledge; at the time it had already been introduced into the theory of equations in the form of Galois theory.
- Secondly, he made much more explicit the idea that each geometrical language had its own, appropriate concepts, so that for example projective geometry rightly talked about conic sections, but not about circles or angles because those notions were not invariant under projective transformations (something familiar in geometrical perspective). The way the multiple languages of geometry then came back together could be explained by the way subgroups of a symmetry group related to each other.
Contents |
[edit] The problems of nineteenth century geometry
Was there one 'geometry' or many? Since Euclid, geometry had meant the geometry of Euclidean space of two dimensions (plane geometry) or of three dimensions (solid geometry). In the first half of the nineteenth century there had been several developments complicating the picture. Mathematical applications required geometry of four or more dimensions; the close scrutiny of the foundations of the traditional Euclidean geometry had revealed the independence of the Parallel Axiom from the others, and non-Euclidean geometry had been born; and in projective geometry new 'points' (points at infinity) had been introduced.
The solution in abstract terms was to use symmetry as an underlying principle, and to state first that different geometries could co-exist, because they dealt with different types of propositions and invariances related to different types of symmetry and transformation. The distinction between affine geometry and projective geometry lies just in the fact that affine-invariant notions such as parallelism are the proper subject matter of the first, while not being principal notions in the second. Then, by abstracting the underlying groups of symmetries from the geometries, the relationships between them can be re-established at the group level. Since the group of affine geometry is a subgroup of the group of projective geometry, any notion invariant in projective geometry is a priori meaningful in affine geometry; but not the other way round. If you add required symmetries, you have a more powerful theory but fewer concepts and theorems (which will be deeper and more general).
[edit] Homogeneous spaces
In other words, the "traditional spaces" are homogeneous spaces; but not for a uniquely determined group. Changing the group changes the appropriate geometric language.
In today's language, the groups concerned in classical geometry are all very well-known as Lie groups: the classical groups. The specific relationships are quite simply described, using technical language.
[edit] Examples
For example the group of projective geometry in n dimensions is the symmetry group of n-dimensional projective space (the matrix group of size n+1, quotiented by scalar matrices). The affine group will be the subgroup respecting (mapping to itself, not fixing pointwise) the chosen hyperplane at infinity. This subgroup has a known structure (semidirect product of the matrix group of size n with the subgroup of translations). This description then tells us which properties are 'affine'. In Euclidean plane geometry terms, being a parallelogram is affine since affine transformations always take one parallelogram to another one. Being a circle is not affine since an affine shear will take a circle into an ellipse.
To explain accurately the relationship between affine and Euclidean geometry, we now need to pin down the group of Euclidean geometry within the affine group. The Euclidean group is in fact (using the previous description of the affine group) the semi-direct product of the orthogonal (rotation and reflection) group with the translations.
| Geometric Group | Number of copies of orthogonal group (rotations and reflections) | Number of copies of additive group (translations) | Number of copies of multiplicative group (dilations) |
|---|---|---|---|
| 2-D Euclidean | 1 | 2 | 0 |
| 2-D Hyperbolic | 1 | 1 | 1 |
| Elliptic | |||
| Affine | |||
| Projective |
[edit] Influence on later work
The long-term effects of the Erlangen program can be seen all over pure mathematics (see tacit use at congruence (geometry), for example); and the idea of transformations and of synthesis using groups of symmetry is of course now standard too in physics.
When topology is routinely described in terms of properties invariant under homeomorphism, one can see the underlying idea in operation. The groups involved will be infinite-dimensional in almost all cases - and not Lie groups - but the philosophy is the same. Of course this mostly speaks to the pedagogical influence of Klein. Books such as those by H.S.M. Coxeter routinely used the Erlangen program approach to help 'place' geometries. In pedagogic terms, the program became transformation geometry, a mixed blessing in the sense that it builds on stronger intuitions than the style of Euclid, but is less easily converted into a logical system.
In his book Structuralism (1970) Jean Piaget says, "In the eyes of contemporary structuralist mathematicians, like Bourbaki, the Erlangen Program amounts to only a partial victory for structuralism, since they want to subordinate all mathematics, not just geometry, to the idea of structure."
For a geometry and its group, an element of the group is sometimes called a motion of the geometry. For example, one can learn about the Poincaré half-plane model of hyperbolic geometry through a development based on hyperbolic motions. Such a development enables one to methodically prove the ultraparallel theorem by successive motions.
The Erlangen Program is carried into mathematical logic by Alfred Tarski in his analysis of propositional truth.
[edit] Abstract returns from the Erlangen program
Quite often, it appears there are two or more distinct geometries with isomorphic automorphism groups. There arises the question of reading the Erlangen program from the abstract group, to the geometry.
One example: oriented (i.e., reflections not included) elliptic geometry (i.e., the surface of an n-sphere with opposite points identified) and oriented spherical geometry (the same non-Euclidean geometry, but with opposite points not identified) have isomorphic automorphism group, SO(n+1) for even n. These may appear to be distinct. It turns out, however, that the geometries are very closely related, in a way that can be made precise.
To take another example, elliptic geometries with different radii of curvature have isomorphic automorphism groups. That does not really count as a critique as all such geometries are isomorphic. General Riemannian geometry falls outside the boundaries of the program.
Some further notable examples have come up in physics.
Firstly, n-dimensional hyperbolic geometry, n-dimensional de Sitter space and (n−1)-dimensional inversive geometry all have isomorphic automorphism groups,
,
the orthochronous Lorentz group, for n ≥ 3. But these are apparently distinct geometries. Here some interesting results enter, from the physics. It has been shown that physics models in each of the three geometries are "dual" for some models.
Again, n-dimensional anti de Sitter space and (n−1)-dimensional conformal space with "Lorentzian" signature (in contrast with conformal space with "Euclidean" signature, which is identical to inversive geometry, for 3 dimensions or greater) have isomorphic automorphism groups, but are distinct geometries. Once again, there are models in physics with "dualities" between both spaces. See AdS/CFT for more details.
More intriguingly, the covering group of SU(2,2) is isomorphic to the covering group of SO(4,2), which is the symmetry group of a 4D conformal Minkowski space and a 5D anti de Sitter space AND a complex four dimensional twistor space.
The Erlangen program can therefore still be considered fertile, in relation with dualities in physics.
[edit] See also
[edit] References
- Guggenheimer, Heinrich, 1977. "Differential Geometry", Dover, NY, ISBN 0-486-63433-7.
An inexpensive book that's still in print, not too difficult, with many references to Lie, Klein and Cartan. P. 139, "A Klein geometry is the theory of geometric invariants of a transitive transformation group (Erlangen program, 1872)".
- Felix Klein, 1872. "Vergleichende Betrachtungen über neuere geometrische Forschungen" ('A comparative review of recent researches in geometry'),
Mathematische Annalen, 43 (1893) pp. 63-100 (Also: Gesammelte Abh. Vol. 1, Springer, 1921, pp. 460-497). An English translation by Mellen Haskell appeared in Bull. N. Y. Math. Soc 2 (1892-1893): 215--249.
The original German text of the Erlangen Program can be viewed at the University of Michigan online collection at [1], and also at [2] in HTML format. A central information page on the Erlangen Program maintained by John Baez is at [3].
- Felix Klein, 2004 "Elementary Mathematics from an Advanced Standpoint: Geometry", Dover, NY, ISBN 0-486-43481-8
(translation of Elementarmathematik vom höheren Standpunkte aus, Teil II: Geometrie, pub. 1924 by Springer). Not a hard book. Has a section on the Erlangen Program.
