Dwell cam
From Wikipedia, the free encyclopedia
Please help improve this article or section by expanding it. Further information might be found on the talk page or at requests for expansion. (January 2007) |
A dwell cam is an intermittent motion mechanism that alternates forward and return motion with holding position.
Dwell cams are often used in pairs in sewing machines to operate the four motion feed dogs, with one cam moving the dog up and down, and the other cam moving the dog forwards and backwards. The cams in this application are usually phased 90 degrees apart allowing a pause in the up/down movement of the dog while it is being moved forwards/backwards. A separate adjustable sliding block or link is used to control the amount of forwards/backards movement of the dog.
[edit] See also
This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it.