Ducati Quattrovalvole motorcycles
From Wikipedia, the free encyclopedia
The Ducati Quattrovalvole are water-cooled, four valve engines from Ducati. They have been produced since 1985 in capacities from 851 cc to 999 cc.
Contents |
[edit] The Early Desmoquattro (851 - 996S)
The water cooled Ducati Desmoquattro engine that has dominated World Superbike racing was introduced in 1985 in Ducati 851 form, and despite subtle changes and increases in capacity, from 851, to 888, 916, and then 996 cc, remains true to the 851 motor designed by Massimo Bordi. That 851 was the first successful adaptation of Ducati’s desmodromic valve actuation to a four valves per cylinder engine, and began production with a 40 degree included valve angle. This was also the introduction of liquid cooling and computerised fuel injection to the V-twin range.
Taglioni had experimented with four valve heads, but had stuck to his 80 degree included valve angle, not realising that a much lower included valve angle was needed for the benefits of the layout to become apparent.
In 1991 Ducati increased the capacity of the 851 to 888 cc, creating the Ducati 888
In 1995, the company introduced the Ducati 916 model designed by Massimo Tamburini, with striking new bodywork that featured aggressive lines, under-seat exhausts, and a single-sided swingarm.[1]
Introduced in 1999 The Ducati 996 competed against Honda’s Firestorm, Suzuki’s TL1000S and Aprilia’s RSV Mille.
The 996 cc engine had larger 98 mm (3.9 inch) pistons, larger valves, a stronger crankshaft and crankcases from the 916 SPS. But the 916 camshaft gave a softer, less peaky power delivery and less top-end power: Output was 83.5 kW (112 bhp) as against the SPS’s 92.4 kW (124 bhp)
From 1999, there were three different 996 models: the first two being the 996 Biposto and the 996S (with Öhlins suspension and the engine of the 996SPS)
[edit] The Testastretta (996R - 999R)
The 2001 996R, last of the "996" models, had the 998 cc engine and new Testastretta head, looking little different from a 996SPS, but producing 135 bhp (100 kW) @ 10,200 rpm and 105 N·m (10.3 kgf·m, 74.5 ft·lbf) of torque at 8,000 rpm. It had a six-speed gearbox.
The new Testastretta head's included valve angle was reduced from 40 degrees to 25 degrees which was more in line with current F1 four-valve theory. The bore and stroke dimensions changed from 98 mm x 66 mm to 100 mm x 63.5 mm, giving a true 998 cc and allowing even bigger valves.
In 2002 the Ducati 998 appeared, and only lasted for one season. The basic SP model featured a combination of items from the parts bins of higher specification versions of the 996, but unlike the 996, had the Testastretta engine in all 998 models. There were also some chassis and aerodynamic modifications.
The 2003 Ducati 999 was designed by Pierre Terblanche, amid much controversy and criticism relating to the styling. Admittedly, the earlier bikes were a hard act to follow.
The basic 999 produced 124 bhp (92 kW) @ 9500 rpm. It was followed by the more powerful 999S producing 136 bhp (99 kW)) @ 9750 rpm and 106 N·m (10.8 kgf·m or 78.2 ft·lbf) @ 8000 rpm, and then the 999R versions were introduced producing 139 bhp (104 kW) and 11 kgf·m (108 N·m) @ 8000 rpm, capable of 0-62 mph in under 3 seconds and with a top speed of over 170 mph (275 km/h).
In 2005 aerodynamic improvements as well as engine uprades were standard. The base 999 was given a 140 bhp engine and outfitted with an adjustable Showa suspension, while the 999S model had 143 bhp (107 kW) and a top of the line Öhlins suspension. The 999R was the only model to displace a true 999 cc (the others were 998 cc) and the engine is good for 150 bhp (112 kW).
The 999’s little brother, the Ducati 749 is complemented to by the 749 Dark, 749S, and 749R. It is a 999 with a lower price, smaller, higher revving engine and slightly smaller rear tire.
The Ducati 999R Xerox race replica was introduced in 2006.
[edit] Testastretta Evoluzione (1098)
The 2007 Ducati 1098 featured a new motor called the Testastretta Evoluzione ("evolution"). It had larger displacement, larger valves, narrower included valve angle, better breathing through oval throttle bodies and butterfly valves, lighter weight (including magnesium valve covers), and higher output than its predecessors.[2] Ducati claim this to be the most powerful twin-cylinder production motorcycle engine in the world.[3]
[edit] Desmotre
The liquid cooled ST3 Desmotre engine has two 34 mm intake valves and one 40 mm exhaust valve and an included angle of 40°. The Desmotre develops 102 hp (76 kW) at 8,750 rpm and 9.5 kgf·m (93 N·m) of torque at 7,250 rpm. The design is aimed at meeting anti-pollution limits to be introduced.
The bottom end is derived from the 1000 DS Desmodue, with the water pump in the alternator cover.
[edit] Desmosedici
The Ducati Desmosedici-RR is a presold batch of V4 race replicas due to arrive in 2007.
[edit] References
- ^ "Modern Ducati" magazine, Article: P61 - P71, "Desmoquattro", Author: Ian Falloon. Publisher: Federal Publishing Company NSW Australia.
- ^ "Ignition Special: Ducati 1098: 'We See a Brilliant Future for the V-Twin'", Bike Magazine, January, 2007.
- ^ 1098 Highlights: The New Testastretta Evoluzione Engine. Ducati.
|
||||||||||||||
