Ducati 851
From Wikipedia, the free encyclopedia
| Ducati 851 | |
| Manufacturer | Ducati |
|---|---|
| Production | 1987-1991 |
| Successor | Ducati 888 |
| Class | Sport bike |
| Engine | 851 cc (52 cu in), L-twin, fuel injected 4 valve per cylinder desmodromic, liquid cooled bore/stroke: 92.0 x 64.0 mm (3.6 x 2.5 inches) Compression ratio: 10.0:1 |
| Power | 93.00 hp (67.9 kW)) @ 9600 rpm |
| Transmission | 6 speed, chain drive |
| Brakes | Front: Dual disc Rear: Single disc |
| Tires | Front: 120/60-17 Rear: 180/55-17 |
| Weight | (dry), 222 kg (489 lb) (wet) |
| Fuel capacity | 20 litres (1,220.5 cu in) |
The Ducati 851 was a Ducati motorcycle, with liquid cooling and four valve heads, released to the public in 1987. Development had lagged with the continued use of two valve engines, but new funds enabled a technological move forward Ducati needed at the time.[1]
[edit] Ducati 851
After buying Ducati, Cagiva invested in the development of another V-twin, but with liquid cooling, and four valve desmodromic heads. Massimo Bordi, had designed a 4V Desmo in 1973 for his thesis at the University of Bologna, and with Cagiva in 1985, saw his updated ideas come into production as the Desmoquattro.
Based on the Pantah motor, but with liquid cooling, fuel injection, and desmodromic four valve heads (with an included valve angle of 40 degrees), the 851 made Ducati race competitive again.
The original Desmo Quattro was an experimental 748 cc 4 valve racer (seen at the Bol d'Or in 1986) and used 750 F1 Pantah crankcases. Bordi collaborated with Cosworth to develop the heads, but in the time they had, they were only able to reduce the included valve angle of the desmodromic engine to 40°, while less than 30° was possible with valve springs. Ducati stuck with the desmodromics.[2]
The subsequent 851 road bike had stronger crankcases, while the heads and valves remained the same; designed to fit above the 88 mm bore of a 748 cc version.
The 1987 – 1988 Ducati 851 Strada used the signature steel tube trellis frame, adorned with Marvic wheels, Brembo brakes and Marzocchi suspension. That first release was criticised for its handling, so front wheel was changed from a 16 inch to a 17 inch wheel, and even better suspension components fitted.[3]
In 1992 the bore was enlarged, thus creating the Ducati 888.[4]
[edit] References
- ^ Ducati 851. Diseno. Retrieved on 2006-11-05.
- ^ The story of the 748 Quattrovalvole. SigmaPerformance. Retrieved on 2006-11-05.
- ^ 851 Strada. MotorcycleSpecs. Retrieved on 2006-11-05.
- ^ '888 SBK specs. Retrieved on 2006-11-06.
|
||||||||||||||
This motorcycle, scooter, or moped-related article is a stub. You can help Wikipedia by expanding it.
 |
This Motorcycle racing-related article is a stub. You can help Wikipedia by expanding it. |
