Dry ice

From Wikipedia, the free encyclopedia

Dry ice pellet sublimating in water
Dry ice pellet sublimating in water
Dry ice block sublimating in air.
Dry ice block sublimating in air.
Small pellets of dry ice sublimating in air.
Small pellets of dry ice sublimating in air.
Carbon dioxide phase diagram
Carbon dioxide phase diagram

Dry ice is [1] solid carbon dioxide. It is commonly used as a versatile cooling agent. Dry ice sublimates, changing directly to a gas at atmospheric pressure. Its sublimation and deposition point is -78.5 °C (-109.3 °F). Its enthalpy of sublimation (ΔHsub) at -78.5 °C (-109.3 °F) is 571 kJ/kg (245.5 BTU/lb). The low temperature and direct sublimation to a gas makes dry ice a very effective coolant, since it is colder than ice and leaves no moisture as it changes state.[2] (Although it can carbonate food that is near).

Contents

[edit] History

In 1835 the French chemist Charles Thilorier published the first account of dry ice.[3][4] Upon opening the lid of a large cylinder containing liquid carbon dioxide he noted much of the carbon dioxide rapidly evaporated leaving solid dry ice in the container. Throughout the next 60 years, dry ice was observed and tested by scientists.

[edit] Manufacture

Dry ice is readily manufactured:[5][6]

  1. Gases containing a high concentration of carbon dioxide are produced. Such gases can be a byproduct of some other process, such as producing ammonia and nitrogen from natural gas, or large-scale fermentation.[6]
  2. Carbon dioxide-rich gas is pressurized and refrigerated until it changes into its liquid form.
  3. The pressure is reduced. When this occurs some liquid carbon dioxide vaporizes, and this causes a rapid lowering of temperature of the remaining liquid carbon dioxide. The extreme cold makes the liquid solidify into a snow-like consistency.
  4. The snow-like solid carbon dioxide is compressed into either small pellets or larger blocks of dry ice.

Dry ice is typically produced in two standard forms: blocks and cylindrical pellets. A standard block weighing approximately 30 kg is most common. These are commonly used in shipping, because they sublimate slowly due to a relatively small surface area. Pellets are around 1 cm in diameter and can be bagged easily. This form is suited to small scale use, for example at grocery stores and laboratories. Dry ice is also inexpensive; it costs less than US$2 per kilogram.[7]

[edit] Applications

Dry ice is commonly used to package items that need to remain cold or frozen, such as ice cream, without the use of mechanical cooling. In medicine it is used to freeze warts to make removal easier.[8] In the construction industry it is used to loosen floor tiles by shrinking and cracking them, as well as to freeze water in valveless pipes to allow repair. In laboratories, a slurry of dry ice in an organic solvent is a useful freezing mixture for cold chemical reactions.

Dry ice can also be used for making ice cream.[9]

Dry ice can be used in theatre productions in order to create the effect of dense fog.

Dry ice can be used to carbonate water and other liquids such as soft drink and beer.[citation needed] It can be used as bait to trap mosquitoes and other insects[10]

When dry ice is placed in water sublimation is accelerated, and low-sinking dense clouds of fog (smoke like) are created. This is used in fog machines, at theaters, discoteques, Halloween, and nightclubs for dramatic effects. When used in theatre productions it creates the effect of dense fog. Dry Ice is also used in cloud seeding: the process of altering cloud precipitation.

[edit] Dry ice blasting

Dry ice pellets dropped in hot water
Dry ice pellets dropped in hot water
Main article: Dry ice blasting

One of the largest alternative uses of dry ice is blast cleaning. Dry ice pellets are shot out of a nozzle with compressed air. This can remove residues from industrial equipment. Examples of materials being removed include ink, glue, oil, paint, mold and rubber. Dry ice blasting can replace sandblasting, steam blasting, water blasting or solvent blasting. The primary environmental residue of dry ice blasting is the sublimed CO2, thus making it a useful technique where residues from other blasting techniques are undesirable.[11]

[edit] See also

[edit] External links

[edit] References

  1. ^ dry ice. The American Heritage Dictionary of the English Language, 4th ed. Houghton Mifflin (2000). Retrieved on 2007-08-21.
  2. ^ Solar Navigator on Carbon Dioxide, retrieved 5 July 2007
  3. ^ Duane H. D. Roller; M. Thilorier (1952). "Thilyorier and the First Solidification of a "Permanent" Gas (1835)". Isis 43 (2): 109-113. 
  4. ^ Charles Thilorier (1835). "Solidification de l'Acide carbonique" (in French). Comptes rendus 1: 194. 
  5. ^ What is Dry Ice?.
  6. ^ a b Carbon Dioxide (CO2) Properties, Uses, Applications: CO2 Gas and Liquid Carbon Dioxide. Universal Industrial Gases, Inc..
  7. ^ ABC Ice House, retrieved 11 March 2008
  8. ^ Lyell A. (1966). "Management of warts.". British medical journal 2 (5529): 1576-9. PMID 5926267. 
  9. ^ Blumenthal, Heston. "How to make the best treacle tart and ice cream in the world", The Sunday Times, 2006-10-29. Retrieved on 2007-06-12. 
  10. ^ Reisen WK, Boyce K, Cummings RC, Delgado O, Gutierrez A, Meyer RP, Scott TW. (1999). "Comparative effectiveness of three adult mosquito sampling methods in habitats representative of four different biomes of California.". J Am Mosq Control Assoc. 15 (1): 24-31. PMID 10342265. 
  11. ^ Wolcott, John. "Ice-blasting firm offers a cool way to clean up", The Daily Herald Co., Everett, WA, 2008-01. Retrieved on 2008-01-20.