Dot matrix display

From Wikipedia, the free encyclopedia

It has been suggested that this article or section be merged with Dot matrix. (Discuss)

A dot matrix display is a display device used to display information on machines, clocks, railway departure indicators and many and other devices requiring a simple display device of limited resolution. The display consists of a matrix of lights or mechanical indicators arranged in a rectangular configuration (other shapes are also possible, although not common) such that by switching on or off selected lights, text or graphics can be displayed. A dot matrix controller converts instructions from a processor into signals which turns on or off lights in the matrix so that the required display is produced.

1 Characteristics
2 Usual Resolutions
3 Usual character resolutions
4 See also
- 4.1 Display configurations

[edit] Characteristics

Dot matrix displays used in pinball machines are generally made using gas bulbs as opposed to LEDs or conventional filament bulbs The orange colour sometimes seen in these displays is based on the Neon gas principle.

[edit] Usual Resolutions

Common sizes of dot matrix displays:

128×16 (Two lined)
128×32 (Four lined)
192×64 (Eight lined)

[edit] Usual character resolutions

A common size for a character is 5×7 pixels, either separated with blank lines with no dots (in most text-only displays), or with lines of blank pixels (making the real size 6x8). This is seen on most graphic calculators, such as CASIO calculators or TI-82 and superior.
A smaller size is 3×5 (or 4x6 when separated with blank pixels). This is seen on the TI-80 calculator as a "pure", fixed-size 3×5 font, or on most 7×5 calculators as a proportional (1×5 to 5×5) font. The disadvantage of the 7×5 matrix and smaller is that lower case characters with descenders are not practical. A matrix of 11×9 is often used to give far superior resolution.