Digital potentiometer

From Wikipedia, the free encyclopedia

A digital potentiometer is a digitally-controlled component that mimics the analog functions of a potentiometer. It is often used for trimming and scaling analog signals by microcontrollers. It is either built using an R-2R integrated circuit or a Digital-to-analog converter. A digital potentiometer is an electronic component that is often controlled by digital protocols like I²C and SPI, as well as more basic Up/Down protocols. Some typical uses of digital potentiometers are in circuits requiring gain control of amplifiers (frequently instrumentation amplifiers), small-signal audio-balancing, and offset adjustment.

Sometimes this device is also referred to as an RDAC, Resistive Digital-to-Analog Converter. ^[1]

1 Limitations
2 See also
3 References
4 External links

[edit] Limitations

These devices are extremely useful in the modern, digitally controlled world, but have some limitations. While quite similar to a normal potentiometer, digital potentiometers are somewhat constrained. Many digital potentiometers have current limits in the tens of milliamperes. Also, most, if not all digital potentiometers limit the input voltage range to the digital supply range (often 0-5VDC), so some ingenuity is often required when attempting to replace standard resistive potentiometers with digital potentiometers. Further, instead of the almost infinite resolution you can obtain from a multiturn resistive potentiometer, digital potentiometers have a finite resolution, often specified in steps or bits. 8-bit pots (256-steps) are most common, but you will frequently see 5, 6, and 7-bit (32, 64, 128 steps, respectively) digital potentiometers. A fourth constraint is that special logic is often required to check for zero crossing of an analog AC signal to allow the resistance value to be changed without causing an audible click in the output for audio amplifiers.

For use and more complete description of potentiometers see Potentiometer

This device type appears to have been created by Xicor in 1985 now a division of Intersil and is now manufactured in many forms by several manufacturers.^{[citation needed]}