Demining

From Wikipedia, the free encyclopedia

Demining is the process of removing land mines or naval mines from an area. Minesweeping is the detection of such mines. There are two distinct types of mine detection and removal: military and humanitarian.

Colombian soldier minesweeping. Colombia has the highest rate of victims by mines
Colombian soldier minesweeping. Colombia has the highest rate of victims by mines


Contents

[edit] Mine clearance

In the combat zone, the process is referred to as mine clearance. The priority is to breach the minefield quickly to create a safe path for troops or ships. Speed is vital, both for tactical reasons and because units attempting to breach the minefield may be under enemy fire. In this situation, it is accepted that mine clearance will be imperfect and there may be casualties from undiscovered mines. Correspondingly, in these mine clearance operations, the methods that are applied for detection and removal are quicker, but not exact. These methods include those that detect and remove in a single action, such as mechanical demining, carpet bombing, burning of the land or the use of Bangalore torpedoes or mine-clearing line charges. According to the doctrine of the U.S. and other armies, mine clearance and demining is carried out by combat engineers.


[edit] Humanitarian demining

In times of relative peace, the process of mine removal is referred to as demining. This is a thorough, time-intensive process that seeks to locate all mines so that the land or sea area may be safely returned to normal use. It is vital that this process is exhaustive. Even if only a small handful of mines remain undiscovered, then demining can actually lead to an increase in civilian mine casualties as local people re-occupy an area they previously avoided in the belief that it has been made safe. In this context demining is one of the tools of mine action. Coordinated by Mine Action Coordination Centers run by the United Nations or a host government, civilian mine clearance agencies are tasked with the demining. In post-conflict areas, minefields are often contaminated with a mixture of explosive remnants of war (ERW) that includes unexploded ordnance as well as landmines. In that context the humanitarian clearance effort is often referred to as battle area clearance.

It is estimated that US$1 billion per year would be sufficient to completely demine globally[citation needed] , but in 2000, only about US$400 million was donated. It takes one to two million US$ to clear a square kilometer of land in most environments. Often, clearing landmines is a necessary condition before other humanitarian programs can be implemented.[1] A large-scale international effort has been made to test and evaluate existing and new technologies for humanitarian demining, notably by the EU, US, Canadian and Japanese governments and by the Mine Action Centres of affected countries. [1],[2].

[edit] Current humanitarian demining methods

The main methods used for humanitarian demining on land are manual detection using metal detectors and prodders, detection by specially trained mine detection dogs, and mechanical clearance using armoured vehicles fitted with flails, tiller or similar devices. In many circumstances, the only method that meets the United Nations' requirements for effective humanitarian demining, the International Mine Action Standards (IMAS), [3] is manual detection and disarmament.[2] The process is typically slow, expensive and dangerous, although demining can be safer than construction work if procedures are followed rigorously. [3] New technologies may provide effective alternatives.

[edit] Manual detection with a metal detector

Foerster Minex 2FD 4.500 Metal detector used by the French army.
Foerster Minex 2FD 4.500 Metal detector used by the French army.

The first step in manual demining is to scan the area with metal detectors, [4] which are sensitive enough to pick up most mines but which also yield about one thousand false positives for every mine,[2] and cannot detect landmines with very low metal content. (While some mines have significant metallic content and are fairly easy to detect with metal detectors, many anti-personnel mines and some anti-tank mines have a very low metal content and are much more challenging to locate). Areas where metal is detected are carefully probed to determine if a mine is present, and must continue until the object that set off the metal detector is found.

[edit] Dogs

Well-trained dogs can sniff out explosive chemicals like TNT in landmines, and are used in several countries.[4]

[edit] Mechanical clearance

Special machines effectively combine mine detection and removal into one operation. In the past, these machines were applied in both mine clearance and demining but are now generally only used for demining. They can be used to verify land that is not expected to be contaminated or as an extra layer of security after an area has cleared by another method, such as dogs.

The machines consist of a special vehicle that is driven through the minefield, deliberately detonating the mines it drives over. These vehicles are designed to withstand the explosions with little damage. Some are operated directly with armour to protect the driver; some are operated under remote control.

  • Mine rollers and mine flails. The roller method originated during World War I and the flail method during World War II but both are still used. Neither system is completely reliable and both will leave undetonated mines, requiring the minefield to be rechecked by another method. Mine flail effectiveness can approach 100% in ideal conditions, but clearance rates as low as 50%-60% have been reported[5]. This is well below the 99.6% standard set by the United Nations for humanitarian demining.[2]
  • Mine plow - a device in front of a tank that excavates the ground, exposing any mines or turning them upside down, which significantly lessens their effects if they explode.
  • Modified long-armed demining bulldozers are being used in a number of countries. It has the capability to remove vegetation before demining and can withstand antipersonnel and antitank landmines. Its long arms give it the benefit of reducing damage to the main body, especially to the operator's cab. Three inch (9 cm) thick bulletproof glass protects the operator from directional mines.[6][7][8]

[edit] Personal protective equipment

Deminers may be issued with personal protective equipment (PPE) such as helmets, visors, armoured gloves, vests and boots, in an attempt to protect them if a mine is set off by accident. IMAS specifies standards for such equipment but draws attention to its limitations and states that at close quarters, antipersonnel fragmentation mines and antitank mines overmatch PPE currently available. [5] PPE can afford significant protection against antipersonnel blast mines, and these are more common.

Related technologies that have been developed to improve safety include large, pillow-like pads strapped to the bottoms of shoes that distribute weight and dull the impact of footsteps, as very slight disturbances of the ground can tip off old, unstable, or intentionally sensitive mine triggers.[citation needed]

Shoes of protective clothing
Shoes of protective clothing

[edit] Removal methods

[edit] Removal methods in demining

In demining, once an object has been detected it is removed by one of the following methods:

  • Manual disarmament.
  • Remote burning of the explosive. Where possible it is better to burn the explosive without detonation. Diethylene triamine (a close relative of ethylenediamine) reacts with TNT to generate heat. The compound that results from this reaction can then be combusted without detonation.[9] It has been reported that this amine is hypergolic with TNT, Tetryl, Composition B and other TNT based explosives. But it does not react in this way with RDX or PETN-based explosives in the same way. Other nitrogen-containing organic ligands (eg pyridine, diethylamine and pyrole) are known to be hypergolic with TNT.[10]
  • Setting the mine on fire while avoiding high-order detonation. This can be done by cutting holes in the mine without detonating its contents[11]

[edit] Removal methods in mine clearance

Some removal methods that are not applied in humanitarian demining, but are common in mine clearance include:

  • The Bangalore Torpedo that clears a path through a minefield. This can also be done using the Antipersonnel Obstacle Breaching System or Giant Viper, a hose-pipe filled with explosives and carried across a minefield by a rocket.[12]
  • Helicopters dragging a plow to overturn or detonate mines. This has the problem of bringing down the helicopter when the plow snags onto objects such as large rocks, but has been corrected by use of pressure-sensitive plow rakes which release when over-pressured. This does, however, affect its effectiveness as mines planted in hard ground or near rocks will not be detonated.

[edit] Case study

Along the China-Vietnam border were numerous minefields. These are the legacy of the border clashes in the 80's. The mines are mainly anti-personnel, and have kept large areas of arable land from use by local farmers. A typical demining process deployed by the Chinese is as below. Firebreaks are dug around the minefield to be cleared. Then engineers would set the minefield on fire with flamethrowers. Key factors of this burning process are: thick vegetation covering the minefields; most anti-personnel mines are buried very close to the ground level; the mines are made of mostly either wood, thin metal or plastic. This burning process would usually destroy about 90% of the mines, as the mines are either detonated or melted. Mines which have trip wires would have these wires burned off. Demining teams then would plow the area with mine detectors. When the teams have cleared the mines, they would walk over the field hand in hand themselves to show to the locals that all the mines have been cleared.

[edit] Detection methods under development

[edit] Advanced electromagnetic methods

[edit] Ground penetrating radar

Conventional metal detectors rely on electromagnetic signals with frequencies of the order of 10-100kHz, which are not sensitive to plastic or wooden mine bodies and the high explosive block itself. The only part of a low-metal mine that they may be able to detect is the detonator. Much higher frequency signals (of the order of 1GHz) are employed in Ground Penetrating Radar (GPR) and these signals are also sensitive to the non-metallic parts of the mine. Unfortunately, they are also affected by innocuous objects such as tree-roots and stones and by local changes in soil moisture, it is difficult to distinguish a mine on a GPR image.

[edit] Dual-sensor

A hybrid approach employing both GPR and metal detector sensors in a single instrument has been developed by several companies and research organisations.

[edit] Biological detection

[edit] Honey bees

Recent research by the University of Montana has revealed that honey bees can, with minimal training, be used to detect landmines with a far greater accuracy and far higher clearance rate than dogs or rats.[13]

[edit] Mammals

Recent experiments with the Gambian giant pouched rat have indicated that it has the required sensitivity to smell, can be trained reliably with food-reward incentives, and is typically too small to set off the mines.[14] Additionally, experiments with electrode-guided rats suggest that demining could one day be accomplished by guiding "ratbots" into areas that humans are unable to reach.[15]

Engineer Thrishantha Nanayakkara and colleagues at the University of Moratuwa in Sri Lanka have come up with a method where a dwarf mongoose is trained to detect landmines by smell and guided by a remote-controlled robot. [16] [17] YouTube video of Mongoose-robot pair

[edit] Plants

The mustard Arabidopsis thaliana, one of the best studied plants in the world, normally turns red under harsh conditions, but using a combination of natural mutations and genetic manipulation scientists from Danish biotechnology company Aresa Biodetection, created a strain that only changes color in response to the nitrous oxide that leaks from landmines and other explosives. Because nitrous oxide can also be formed by denitrifying bacteria, there is some risk of false positives using this technique, and researchers are attempting to make the plant less sensitive. The plants would aid demining by indicating the presence of mines through color change, and could either be sown from aircraft or by people walking through demined corridors in minefields. As of February 2005, no studies have been conducted with actual landmines, though successful studies have been done in greenhouses. In order to prevent the spread of this genetically modified organism into the wild, the plants have been further modified so that they will only sprout when provided with an external growth factor.[18]

[edit] Bacteria

A bacterium has been genetically engineered to fluoresce under ultraviolet light in the presence of TNT. Tests involving spraying such bacteria over a simulated minefield successfully located mines. In the field, this method could allow for searching hundreds of acres in a few hours, which is much faster than other techniques, and could be used on a variety of terrain types. While there are some false positives (especially near plants and water drainage), even three ounces of TNT were detectable using these bacteria. Unfortunately, there is no strain of bacteria capable of detecting RDX, another common explosive, and the bacteria may not be visible under desert conditions. Also, well-constructed munitions that have not had time to corrode may be undetectable using this method.[19]

[edit] Marine mammals

The U.S. Navy Marine Mammal Program uses sea lions and dolphins, among other species, in the detection of seamines.[20]

[edit] Nuclear detection

The vast majority of explosives used in land mines are very nitrogen rich when compared with other materials. It is possible by elemental analysis by neutrons to detect nitrogen by means of the reaction

14N + n → 14C + p + γ (10.8 MeV)

The system works by subjecting the mine to thermal neutrons while searching for the very rare and high energy gamma photons; these photons will only be observed when an object containing nitrogen is being subjected to the neutron irradiation.[21] One possible neutron source is californium-252 which undergoes spontaneous fission. A better neutron source is to use a sealed tube electrostatic D-T neutron generation tube, this has the advantage that the tritium is much less radiotoxic than the californium so in the event of an accident such as an explosion the nuclear mine detection equipment would pose a smaller threat to humans. This type of explosive detection has been proposed for use in airport security and for the detection of explosives in trucks coming into military bases.[22][23][24]

[edit] Acoustic detection

It is possible to detect land mines by directing sound waves at the area to be demined, which causes the land mines to vibrate, and then using a laser to search for vibrations on the surface by means of the Doppler shift - this technique is termed Scanning Laser Doppler Vibrometry. Such devices have been constructed e.g. at the University of Mississippi,[25] at MIT[26] and by the Keyser-Threde Company[27] .

[edit] See also

[edit] References

  1. ^ 'Landmines - Some Common Myths" Demining Research website. University of Western Australia, updated January, 2000.
  2. ^ a b c "What Is Demining?" Demining Research website. University of Western Australia, updated September 22, 1998.
  3. ^ "What you can do to help" Demining Research website. University of Western Australia, updated January, 2000.
  4. ^ "Mine Detection Dogs in Use". Demining Research website. University of Western Australia, updated March 28, 2000.
  5. ^ (2004). "A Study of Mechanical Application in Demining" (PDF). . Geneva International Centre for Humanitarian Demining Retrieved on 2007-07-23.
  6. ^ HITACHI NOW : The Challenge of Demining (Part 1) Returning fertility to the land and putting a smile on the face of the children
  7. ^ Japanese Contraption Safely Removes Landmines
  8. ^ Kiyoshi Amemiya | Invited Speaker | The 2nd International Conference for Universal Design in Kyoto 2006
  9. ^ http://www.humanitarian-demining.org/demining/pubs/neutral/insituchem.asp
  10. ^ http://www.humanitarian-demining.org/demining/pubs/neutral/eudem.asp
  11. ^ Electrochemical Machining for UXO Neutralisation
  12. ^ Mk7 Antipersonnel Obstacle Breaching Systems (APOBS)
  13. ^ "Bees used in Area Reduction and Mine Detection". Jerry J. Bromenshenk et al. Journal of Mine Action. Issue 7.3. December 2003.
  14. ^ "Move Over Sniffer Dogs, Here Come Africa's Rats." Reuters, September 27, 2004.
  15. ^ "Here Come the Ratbots". BBC News, May 1, 2002.
  16. ^ Mongoose-robot duo sniff out landmines
  17. ^ "A Human-Animal-Robot Cooperative System for Anti-Personal Mine Detection"
  18. ^ Mine-sniffing Plants. American Communications Foundation, February 17, 2005.
  19. ^ R.S. Burlage, M. Hunt, J. DiBenedetto, and M. Maston. Bioreporter Bacteria For The Detection Of Unexploded Ordnance. Excerpt from the Demining Research website.
  20. ^ Mine Hunting Systems of the U.S. Navy Marine Mammal Program
  21. ^ http://www.iaea.org/Publications/Magazines/Bulletin/Bull432/article4.pdf
  22. ^ http://www.nuke.hun.edu.tr/~lo/ak-drug.pdf
  23. ^ NDM Article - Fast Neutron Technology Used for Explosive Detection
  24. ^ http://www.bath.ac.uk/~lh226/idaho.pdf
  25. ^ "Laser Doppler Vibrometer-Based Acoustic Landmine Detection Using the Fast M-Sequence Transform, N Xiang and J M Sabatier, IEEE Geosci. and Remote Sens. Letts. Vol. 1 (4) 2004". 
  26. ^ "Vibrations could reveal landmine locations", New Scientist, 22 December 2006. Retrieved on 2006-12-29. 
  27. ^ "M Heybel, K-H Bers and V H Klein, Proc. SPIE, Volume 5415, pp. 80-90 (2004)". 

[edit] External links

Look up Demining in
Wiktionary, the free dictionary.
Equipment suppliers
Research and policy