Decay heat

From Wikipedia, the free encyclopedia

RTG pellet glowing red because of the heat generated by the radioactive decay of plutonium-238 dioxide, after a thermal isolation test.

Decay heat is the heat released as a result of radioactive decay. This is when the radiation interacts with materials and the energy of the alpha, beta or gamma radiation is converted into the thermal movement of atoms.

1 Power reactors in shutdown
2 Used fuel
3 Radioisotope Thermoelectric Generator
4 References
5 External links

[edit] Power reactors in shutdown

In a typical nuclear fission reaction, 187 MeV of energy are released instantaneously in the form of kinetic energy from the fission products, kinetic energy from the fission neutrons, instantaneous gamma rays, or gamma rays from the capture of neutrons.^[1] An additional 23 MeV of energy are released at some time after fission from the beta decay of fission products. About 10 MeV of the energy released from the beta decay of fission products is in the form of neutrinos and since neutrinos are very weakly interacting this 10 MeV of energy will not be deposited in the reactor core. This results in 13 MeV (6.5% of the total fission energy) being deposited in the reactor core after any given fission reaction has occurred. When a nuclear reactor has been shut down, and it can be considered that nuclear fission is not occurring at a large scale, the major source of heat production will be due to the beta decay of these fission fragments. For this reason, at the moment of reactor shutdown, decay heat will be about 6.5% of the previous core power if the reactor has had a long and steady power history. About 1 hour after shutdown, the decay heat will be about 1% of the previous core power. Because the decay heat production rate is dependent upon the half-lives of the various fission products in the core, it will slowly decrease over time.

The removal of the decay heat is a significant reactor safety concern, especially shortly after shutdown. Failure to remove decay heat may cause the reactor core temperature to rise to dangerous levels and has caused nuclear accidents, including the nuclear accident at Three Mile Island. The heat removal is usually achieved through several redundant and diverse systems, and the heat is often dissipated to an 'ultimate heat sink' which has a large capacity and requires no active power, though this method is typically used after decay heat has reduced to a very small value.

[edit] Used fuel

After one year, typical spent nuclear fuel generates about 10 kW of decay heat per tonne, decreasing to about 1 kW/t after ten years.^[2] Hence effective passive cooling for spent nuclear fuel is required for a number of years.