Cray APP

From Wikipedia, the free encyclopedia

The Cray APP (Attached Parallel Processor) was a parallel computer sold by Cray Research from 1992 onwards. It was based around the Intel i860 microprocessor and could be configured with up to 84 processors. The architecture was based around "computational nodes" of 12 processors interconnected by a shared bus, with multiple nodes connected to each other, memory and I/O nodes via an 8×8 crossbar switch.

The APP was marketed as a "matrix co-processor" system and required a SPARC-based host system to operate, such as the Cray S-MP. Connection to the host system was via VMEbus or HiPPI. A fully configured APP had a peak performance of 6.7 (single-precision) gigaflops.

The APP was originally designed by FPS Computing as the FPS MCP-784. FPS were acquired by Cray Research in 1991, becoming Cray Research Superservers Inc., and the MCP-784 was relaunched by Cray in 1992 as the APP.

[edit] References

 This computer hardware-related article is a stub. You can help Wikipedia by expanding it.
v • d • e
Cray computers

Cray Research
Cray-1 • Cray X-MP • Cray-2 • Cray Y-MP • Cray XMS • Cray Y-MP EL
Cray C90 • Cray EL90 • Cray T3D • Cray J90 • Cray T90 • Cray T3E • Cray SV1
Cray Computer Corp.
Cray-3 • Cray-4
Cray Research Superservers
Cray APP • Cray S-MP • Cray CS6400
Cray Inc.
Cray SX-6 • Cray MTA-2 • Cray Red Storm • Cray X1 • Cray XT3
Cray XD1 • Cray XT4 • Cray XMT • Cray XT5