Image:Connector plate.svg

From Wikipedia, the free encyclopedia

Connector_plate.svg‎ (SVG file, nominally 601 × 301 pixels, file size: 18 KB)

Wikimedia Commons logo This is a file from the Wikimedia Commons. The description on its description page there is shown below.
Commons is a freely licensed media file repository. You can help.


I, Ltljltlj, the creator of this image, hereby release it into the public domain. If that cannot be done for any reason, including the nonexistence of a way to release a work into the public domain, I release it (or my changes in the case of a derivative work) under the following license:
Copyright This image is copyrighted. The copyright holder has irrevocably released all rights to it, allowing it to be freely reproduced, distributed, transmitted, used, modified, built upon, or otherwise exploited in any way by anyone for any purpose, commercial or non-commercial, with or without attribution of the author.

600 mm by 300 mm (24 in by 12 in) connector plate, made roughly to the specifications of the 2004 edition of Standard Highway Signs. Uses the Roadgeek 2005 fonts. (United States law does not permit the copyrighting of typeface designs, and the fonts are meant to be copies of a U.S. Government-produced work anyway.) The outside border has a width of 1 (1 mm) and a color of black so it shows up; in reality, signs have no outside border.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current20:38, 28 February 2007601×301 (18 KB)Ltljltlj
10:10, 15 August 2006601×301 (16 KB)Ltljltlj ({{Ltljltlj}} 600 mm by 300 mm (24 in by 12 in) connector plate, made to the specifications of the [http://mutcd.fhwa.dot.gov/SHSm/Guide.pdf 2004 edition of Standard Highway Signs] (sign M4-2). Uses the [http://www.triskele.com/fonts/index.html Roadgeek 20)