Construx
From Wikipedia, the free encyclopedia
Construx was a brand of plastic building toys introduced by Fisher-Price in 1983. Unlike other building toys such as Lego, Construx featured beam-like pieces of varying lengths that snapped on to cubical connector knots in order to build large shapes. These were relatively secure even though no nuts or bolts were used. Panels allowed assembly of flat surfaces. Hinges, motors, wheels, and other movable parts expanded the number of different shapes that could be built, and made moving creations possible. Construx was discontinued in 1988, briefly revived by Mattel in 1997, and then discontinued again.
The parts included:
- Blue connector knots, all six sides of which can snap on to beams or other pieces. In the Alien series sets, these knots were gray instead of blue.
- Beams, the other staple part, having lengths of 1,2, and 4. Notched at each end to accept a "knot" piece, they have a hollow bottom, which is the direction from which knots snap in and out. Originally gray, the Space and Alien series added white and black beams respectively. Military series sets had beams and knots in camouflage green.
- Hinge knots, black in color. Similar to blue connector knots, they have 4 connections, three rigidly connected together, and the fourth, on the other side of the hinge, movable through 180 degrees.
- Spinner knots, orange in color. They have 5 regular points, and 1 special knot acceptor that clicks onto another knot allowing the two piece to rotate freely with respect to each other. The offset on this connector is a unique distance, limiting the versatility of this piece.
- Orange knots. 5 points again, but with a flat and a small hole on one side. This is meant to hold onto a string for a crane set. You pass a shoelace through the small hole, and double it back through the opposite face of the knot.
- Diagonal clips, flat straps of plastic with end hooks to grab a knot. They are long enough to reach two down/two across. They're the right size to reinforce a corner. They are free to swing from a knot, and can add movement.
- Axles, which could slip through the holes in connector knots, and the hollow of beams. Pulleys can hang off them.
- Bent Bars. These were either 2 down/2 across, or 2 down/4 across. The long ones come in left and right versions.
- Canopy. Available in short and long. A nice piece for show and imagination, but not structurally significant.
- Panels. Available in 1x2, 2x2, 2x4, and matches for the canopy pieces. Available in blue, space-green, and camo colors. These are usually not structural, but you can use them to keep bars from backing out of their knots by pointing the bar's slot side away from the panel, and attach.
- Wheels, crane hooks, winches, seats, men, engine panels, turntables, and more.
For a short time near the end of the Fisher Price run, a version targeted at younger children was released called Basix Construx. It used bright primary colors and did not contain the more complex pieces such as axles and pulleys.