Computer program

From Wikipedia, the free encyclopedia

Computer programs (also software programs, or just programs) are instructions for a computer.[1] A computer requires programs to function, and a computer program does nothing unless its instructions are executed by a central processor.[2] Computer programs are either executable programs or the source code from which executable programs are derived (e.g., compiled).

Computer source code is often written by professional computer programmers. Source code is written in a programming language that usually follows one of two main paradigms: imperative or declarative programming. Source code may be converted into an executable file (sometimes called an executable program) by a compiler. Computer programs may be executed by a central processing unit, with the aid of an interpreter, or may be embedded directly into hardware.

Computer programs may be categorized along functional lines: system software and application software. And many computer programs may run simultaneously on a single computer, a process known as multitasking.

Contents

[edit] Programming

Source code of a program written in the C programming language
Source code of a program written in the C programming language
Main article: Computer programming

Computer programming is the iterative process of writing or editing source code. Editing source code involves testing, analyzing, and refining. A person who practices this skill is referred to as a computer programmer or software developer. The sometimes lengthy process of computer programming is usually referred to as software development. The term software engineering is becoming popular as the process is seen as an engineering discipline.

[edit] Paradigms

Computer programs can be categorized by the programming language paradigm used to produce them. Two of the main paradigms are imperative and declarative.

Programs written using an imperative language specify an algorithm using declarations, expressions, and statements.[3] A declaration associates a variable name with a datatype. For example: var x: integer; . An expression yields a value. For example: 2 + 2 yields 4. Finally, a statement might assign an expression to a variable or use the value of a variable to alter the program's control flow. For example: x := 2 + 2; if x = 4 then do_something(); One criticism of imperative languages is the side-effect of an assignment statement on a class of variables called non-local variables.[4]

Programs written using a declarative language specify the properties that have to be met by the output and do not specify any implementation details. Two broad categories of declarative languages are functional languages and logical languages. The principle behind functional languages (like Haskell) is to not allow side-effects, which makes it easier to reason about programs like mathematical functions.[4] The principle behind logical languages (like Prolog) is to define the problem to be solved — the goal — and leave the detailed solution to the Prolog system itself.[5] The goal is defined by providing a list of subgoals. Then each subgoal is defined by further providing a list of its subgoals, etc. If a path of subgoals fails to find a solution, then that subgoal is backtracked and another path is systematically attempted.

The form in which a program is created may be textual or visual. In a visual language program, elements are graphically manipulated rather than textually specified.

[edit] Compilation or interpretation

A computer program in the form of a human-readable, computer programming language is called source code. Source code may be converted into an executable image by a compiler or executed immediately with the aid of an interpreter.

Compiled computer programs are commonly referred to as executables, binary images, or simply as binaries — a reference to the binary file format used to store the executable code. Compilers are used to translate source code from a programming language into either object code or machine code. Object code needs further processing to become machine code, and machine code is the Central Processing Unit's native code, ready for execution.

Interpreted computer programs are either decoded and then immediately executed or are decoded into some efficient intermediate representation for future execution. BASIC, Perl, and Python are examples of immediately executed computer programs. Alternatively, Java computer programs are compiled ahead of time and stored as a machine independent code called bytecode. Bytecode is then executed upon request by an interpreter called a virtual machine.

The main disadvantage of interpreters is computer programs run slower than if compiled. Interpreting code is slower than running the compiled version because the interpreter must decode each statement each time it is loaded and then perform the desired action. On the other hand, software development may be quicker using an interpreter because testing is immediate when the compilation step is omitted. Another disadvantage of interpreters is the interpreter must be present on the computer at the time the computer program is executed. Alternatively, compiled computer programs need not have the compiler present at the time of execution.

No properties of a programming language require it to be exclusively compiled or exclusively interpreted. The categorization usually reflects the most popular method of language execution. For example, BASIC is thought of as an interpreted language and C a compiled language, despite the existence of BASIC compilers and C interpreters.

[edit] Self-modifying programs

A computer program in execution is normally treated as being different from the data the program operates on. However, in some cases this distinction is blurred when a computer program modifies itself. The modified computer program is subsequently executed as part of the same program. Self-modifying code is possible for programs written in Lisp, COBOL, and Prolog.

[edit] Execution and storage

Typically, computer programs are stored in non-volatile memory until requested either directly or indirectly to be executed by the computer user. Upon such a request, the program is loaded into random access memory, by a computer program called an operating system, where it can be accessed directly by the central processor. The central processor then executes ("runs") the program, instruction by instruction, until termination. A program in execution is called a process.[6] Termination is either by normal self-termination or by error — software or hardware error.

[edit] Embedded programs

The microcontroller on the right of this USB flash drive is controlled with embedded firmware.
The microcontroller on the right of this USB flash drive is controlled with embedded firmware.

Some computer programs are embedded into hardware. A stored-program computer requires an initial computer program stored in its read-only memory to boot. The boot process is to identify and initialize all aspects of the system, from CPU registers to device controllers to memory contents.[7] Following the initialization process, this initial computer program loads the operating system and sets the program counter to begin normal operations. Independent of the host computer, a hardware device might have embedded firmware to control its operation. Firmware is used when the computer program is rarely or never expected to change, or when the program must not be lost when the power is off.[8]

[edit] Manual programming

Switches for manual input on a Data General Nova 3
Switches for manual input on a Data General Nova 3

Computer programs historically were manually input to the central processor via switches. An instruction was represented by a configuration of on/off settings. After setting the configuration, an execute button was pressed. This process was then repeated. Computer programs also historically were manually input via paper tape or punched cards. After the medium was loaded, the starting address was set via switches and the execute button pressed.[9]

[edit] Automatic program generation

Generative programming is a style of computer programming that creates source code through generic classes, prototypes, templates, aspects, and code generators to improve programmer productivity. Source code is generated with programming tools such as a template processor or an Integrated Development Environment. The simplest form of source code generator is a macro processor, such as the C preprocessor, which replaces patterns in source code according to relatively simple rules.

Software engines output source code or markup code that simultaneously become the input to another computer process. The analogy is that of one process driving another process, with the computer code being burned as fuel. Application servers are software engines that deliver applications to client computers. For example, a Wiki is an application server that allows users to build dynamic content assembled from articles. Wikis generate HTML, CSS, Java, and Javascript which are then interpreted by a web browser.

[edit] Simultaneous execution

See also: Process (computing) and Multiprocessing

Many operating systems support multitasking which enables many computer programs to appear to be running simultaneously on a single computer. Operating systems may run multiple programs through process scheduling — a software mechanism to switch the CPU among processes frequently so that users can interact with each program while it is running.[10] Within hardware, modern day multiprocessor computers or computers with multicore processors may run multiple programs.[11]

[edit] Functional categories

Computer programs may be categorized along functional lines. These functional categories are system software and application software. System software includes the operating system which couples the computer's hardware with the application software.[12] The purpose of the operating system is to provide an environment in which application software executes in a convenient and efficient manner.[12] In addition to the operating system, system software includes utility programs that help manage and tune the computer. If a computer program is not system software then it is application software. Application software includes middleware, which couples the system software with the user interface. Application software also includes utility programs that help users solve application problems, like the need for sorting.

[edit] References

  1. ^ Stair, Ralph M., et al (2003). Principles of Information Systems, Sixth Edition. Thomson Learning, Inc., 132. ISBN 0-619-06489-7. 
  2. ^ Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 58. ISBN 0-201-50480-4. 
  3. ^ Wilson, Leslie B. (1993). Comparative Programming Languages, Second Edition. Addison-Wesley, 75. ISBN 0-201-56885-3. 
  4. ^ a b Wilson, Leslie B. (1993). Comparative Programming Languages, Second Edition. Addison-Wesley, 213. ISBN 0-201-56885-3. 
  5. ^ Wilson, Leslie B. (1993). Comparative Programming Languages, Second Edition. Addison-Wesley, 244. ISBN 0-201-56885-3. 
  6. ^ Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 97. ISBN 0-201-50480-4. 
  7. ^ Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 30. ISBN 0-201-50480-4. 
  8. ^ Tanenbaum, Andrew S. (1990). Structured Computer Organization, Third Edition. Prentice Hall, 11. ISBN 0-13-854662-2. 
  9. ^ Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 6. ISBN 0-201-50480-4. 
  10. ^ Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 100. ISBN 0-201-50480-4. 
  11. ^ Akhter, Shameem (2006). Multi-Core Programming. Richard Bowles (Intel Press), pp. 11-13. ISBN 0-9764832-4-6. 
  12. ^ a b Silberschatz, Abraham (1994). Operating System Concepts, Fourth Edition. Addison-Wesley, 1. ISBN 0-201-50480-4. 

[edit] Further reading

  • Knuth, Donald E. (1997). The Art of Computer Programming, Volume 1, 3rd Edition. Boston: Addison-Wesley. ISBN 0-201-89683-4. 
  • Knuth, Donald E. (1997). The Art of Computer Programming, Volume 2, 3rd Edition. Boston: Addison-Wesley. ISBN 0-201-89684-2. 
  • Knuth, Donald E. (1997). The Art of Computer Programming, Volume 3, 3rd Edition. Boston: Addison-Wesley. ISBN 0-201-89685-0. 

[edit] External links