ColorCAM
From Wikipedia, the free encyclopedia
ColorCAM was both, a CAD and a CAM system for Printed Circuit Boards (PCB). Introduced in 1983 by Lothar Klein, LKSoft it was one of the very first systems running on a personal computer instead of a workstation or mainframe which was typically the case for all CAD applications at that time.
ColorCAM was originally developed and marketed under the name LAYCAD and was running on computers from ELTEC in Mainz/Germany and HEMA in Aalen/Germany using the Motorola 6809 CPU; one of the most powerful 8/16 bit processors at that time. To be able to address more than the maximal 64 Kbyte of RAM available with an 16 bit address space these computers had special hardware to superimpose a memory window in this 16 bit address space from a bigger storage with up to 512 Kbyte RAM. The ELTEC computer had a 512*256 pixel memory mapped graphic while the HEMA computer had a 640*400 pixel graphic using the NEC 7220 graphics controller chip. Both computers used the FLEX (operating_system).
In 1984 ColorCAM was ported onto the newly introduced 16 bit IBM AT computer. At that time the only available colour graphics adapter (CGA) had a resolution of 320*200 pixel, not sufficient for a CAD application. So the HEMA graphics was turned into an external "Graphic box" and connected with the IBM AT via the parallel port. A next major improvement was the introduction of an expansion board using the Hitachi ACRT graphics controller HD63484. With up to 1 Mbyte of video RAM it was possible to create a 1600 by 1200 pixel graphic with 4 bit/pixel and display it on a 1024 by 786 CRT display. The processing power of the IBM-AT class of computers was too low to implement algorithms for the automatic routing of tracks on the PCB. Therefore a solution using Maze runner concepts was realized on an expansion board using the INMOS Transputer to boost the processing power. ColorCAM itself was written in the Pascal programming language with only small parts in Assembly language.
On the CAM side ColorCAM was optimized for running the milling and drilling machines from LPKF for the production of PCB prototypes.
Support and sales of ColorCAM were discontinued in 1993. In total more than 1000 licenses of ColorCAM were sold worldwide by LPKF within less than 10 years.
