Chromium carbide

From Wikipedia, the free encyclopedia

Chromium carbide
Image:Chromium carbide.jpg
Identifiers
CAS number	[12012-61-9]
Properties
Molecular formula	Cr₃C₂
Molar mass	180.01 g/mol
Density	6.65-6.68 g/cm³
Melting point	1890 °C
Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) Infobox disclaimer and references

Chromium carbide (Cr₃C₂) is an extremely hard refractory ceramic material. It is usually processed by sintering. It has the appearance of a gray powder with orthorhombic crystal structure. Its CAS number is 12012-61-9.

Other compositions are available, eg. Cr₂₃C₆, and Cr₇C₃.

Chromium carbide is used as a thermal spray material for protecting the underlying metal surface, and as an additive to corrosion-resistant and wear-resistant materials. It is used in coatings of bearings, seals, orifices, and valve seals, and as a fine-crystal phase in other sintered carbides, where, like the vanadium carbide, it inhibits growth of submicrometre grains during pressing and sintering. It is highly corrosion-resistant, and does not oxidize even at high temperature (1000-1100 °C). The powder for coating costs $40-$65 per pound.

The thermal expansion coefficient of chromium carbide is almost equal to that of steel, reducing the mechanical stress buildup at the layer boundary.

Precipitation of chromium carbide at the grain boundaries, depleting the grain edges of chromium, is the cause of intergranular corrosion of stainless steel near the welds.

Physical Properties:

Density ( kg/m³ ): 6,650-6,680 (Cr₃C₂)
Melting point ( °C ): 1250 (Cr₂₃C₆), 1665 (Cr₇C₃), 1890 (Cr₃C₂).

[edit] References

This article does not cite any references or sources. (September 2007)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.