CE mark

From Wikipedia, the free encyclopedia

The constructional details of CE mark
The constructional details of CE mark

The CE marking (also known as CE mark) is a mandatory conformity mark on many products placed on the single market in the European Economic Area (EEA).

Contents

[edit] Significance

By affixing the CE marking, the manufacturer, its authorized representative, or person placing the product on the market or putting it into service asserts that the item meets all the essential requirements of the relevant European Directive(s). Examples of European Directives requiring CE marking include toy safety, machinery, low-voltage equipment, R&TTE, and EM compatibility. There are about 25 Directives requiring CE marking. [1].

Officially, CE has no meaning as an abbreviation, but may have originally stood for Communauté Européenne or Conformité Européenne, French for European Conformity.

[edit] Declaration of conformity

The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directives. To permit the use of a CE mark on a product, proof that the item meets the relevant requirements must be documented. Sometimes this is achieved using an external test house which evaluates the product and its documentation. Often it is achieved by a company-internal self-certification process. In any case the responsible organization (manufacturer, representative, importer) has to issue a EC-Declaration of Conformity (EC-DoC) indicating his identity (location, etc.), the list of European Directives he declares compliance with, a list of standards the product complies with, and a legally binding signature on behalf of the organization. The EC-DoC underlines the sole responsibility of the manufacturer. Parts of the certification process for the CE marking could be performed by 3rd party test houses or certification bodies; in case that this is mandatory the CE symbol also includes a number that identifies the so called Notified Body.

To be strictly accurate, there are two forms of Declaration, either a "Declaration of Conformity" or a "Declaration of Incorporation". Generally speaking this is only the case under the Machinery Directive, for example, a stand alone machine, which requires only a power source to operate would be issued with a Declaration of Conformity. Whereas, a machine which requires additional systems, attachments, feed conveyors etc, before it can provide its intended function, must be issued with a Declaration of Incorporation. In this latter case it is illegal to CE Mark such a machine. This can only be achieved once the machine has been finally installed and all other elements incorporated into the system, then a final Risk Assessment is performed to verify compliance of the system and a final Declaration of Conformity is then issued.

Furthermore, these directives are based upon what the European Commission calls a New Approach, whereby if any of the Article 100A Directives apply to your product, then you must apply them. More information on these and other directives can be found at [1] or [2]

Directives providing the requirements for the CE marking are created by the European Union (EU), but the markings are required throughout the European Economic Area (EEA). According to information provided by the Swiss Government for Swiss Exporters the CE Mark is not compulsory in Switzerland except for products for export to the European Union.)

[edit] Origin of mark

The mark was designed by Arthur Eisenmenger according to an article in The Guardian on 23-12-2001. The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5mm.[2]

[edit] Mutual recognition of conformity assessment

There are numerous Agreements on Mutual Recognition of Conformity Assessment between the European Union and other countries such as the USA, Japan, Canada, Australia, New Zealand and Israel. Consequently the CE mark is now found on many products from these countries.

Turkey (which is not a member of the EEA) also requires products to show CE marking as affirmations of conformity.

[edit] The e mark

The similar "e mark", rather than the CE logo, is used on motor vehicles and components for motor vehicles [3] [4] [5]. (The "e mark" for motor vehicles is not to be confused with the estimated sign on food labels [6]).

[edit] References

  1. ^ New Approach Standardisation in the Internal Market - Directives & Standards. CEN, CENELEC, ETSI, European Commission and EFTA.. Retrieved on 2007-06-05.
  2. ^ Connolly, Kate (2001-12-23). Inventor who coined euro sign fights for recognition. The Observer. Retrieved on 2007-06-05. “Arthur Eisenmenger, now 86, created the euro symbol - which is being presented as a 'brand new' sign - more than a quarter of a century ago. It was one of his last assignments before retiring as chief graphic designer for the European Economic Community [...] Eisenmenger was also responsible for creating the European Union flag and for designing the 'CE' European consumer goods quality control symbol.”

[edit] Further reading