Carrier-to-noise ratio

From Wikipedia, the free encyclopedia

This article or section needs copy editing for grammar, style, cohesion, tone or spelling.
You can assist by editing it now. A how-to guide is available. (April 2008)

In telecommunications, the carrier-to-noise ratio, often written CNR or C/N, is the signal-to-noise ratio (SNR) of a modulated signal. The CNR is the quotient between the average received modulated carrier power C and the average received noise power N after the receiver filters. The aim of the term is to distinguish the CNR of the radio frequency passband signal from the SNR of an analogue base band message signal after demodulation, for example an audio frequency analogue message signal. If this distinction is not necessary, the term SNR is often used instead of CNR, with the same definition.

C/N of a QPSK Signal

High C/N ratios provide good quality of reception, for example low bit error rate (BER) of a digital message signal, or high SNR of an analogue message signal.

C and N may be measured in watts or in volts squared.

$CNR = \frac {C}{N} = \left ( \frac {V_\mathrm{carrier_{RMS}}} {V_\mathrm{noise_{RMS}}} \right ) ^2$ ,

where $V_\mathrm{carrier_{RMS}}$ and $V_\mathrm{noise_{RMS}}$ are the root mean square voltage levels in volts of the carrier signal and noise respectively.

Engineers often specify the C/N ratio in decibels (dB) between the power in the carrier of the desired signal and the total received noise power, according to the following:

$\mathrm{CNR (dB)} = 10 \log_{10} \frac {C}{N} =20 \log_{10} \frac {V_\mathrm{carrier_{RMS}}} {V_\mathrm{noise_{RMS}}}$

The C/N ratio is measured in a manner similar to the way the signal-to-noise ratio (S/N) is measured, and both specifications give an indication of the quality of a communications channel.

In the famous Shannon–Hartley theorem, the C/N ratio is equivalently to the S/N ratio.

The C/N ratio resembles the carrier-to-interference ratio (C/I, CIR), and the carrier-to-noise-and-interference ratio, C/(N+I) or CNIR.

[edit] See also

Signal-to-noise ratio (SNR or S/N)
Carrier-to-interference ratio (CIR or C/I)
Audio system measurements
Video quality
Subjective video quality
Near-far problem
Peak signal-to-noise ratio
SINAD (ratio of signal-plus-noise-plus-distortion to noise-plus-distortion)
Eb/N0 (energy per bit relative to noise power spectral density)
Es/N0 (energy per symbol relative to noise power spectral density)
Carrier-to-receiver noise density C/N₀

[edit] References

This article does not cite any references or sources. (February 2008)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.