Canadian Vickers Vanessa

From Wikipedia, the free encyclopedia

Vanessa

Canadian Vickers Vanessa during RCAF testing
Type transport seaplane
Manufacturer Canadian Vickers
Status Cancelled
Primary user RCAF (intended)
Number built 1

The Canadian Vickers Vanessa was a Canadian biplane transport seaplane of the 1920s. It was a single-engine, twin-float biplane of mixed construction.

Contents

[edit] Design and development

The Vanessa was developed as a private venture commercial seaplane. The Canadian Vickers Chief Engineer based his design on the contemporary Stinson cabin biplane which had ben introduced in the United States. The one feature that was a departure from the Stinson was the use of interplane struts which formed an "X" (when viewed from the front) thus eliminating the need for traditional wire bracing and allowing easy access to the cabin. The enclosed cabin fuselage was constructed of steel tubing as were various support structures along with the tail surfaces. The remainder of the aircraft was of wood construction and the entire aircraft was fabric covered.

Ailerons and flaps, the latter being an unusual feature in aircraft of that time, were fitted to each of the equal span wings and were also interconnected by struts.

[edit] Testing

A prototype, G-CYZJ, was constructed, after which the RCAF evinced an interest in the type as a communications aircraft. Service testing indicated that the aircraft was underpowered and the Lynx was replaced with a Whirlwind of greater power.

In September 1927, the still experimental Vickers Vanessa was used for series of trial airmail runs involving the first airmail delivery. While waiting off the dock at Rimouski, Quebec, on 9 September 1927, RCAF S/L John H. Tudhope received 502 pounds of mail from the inbound "Empress of France." While taxiing the Vanessa for takeoff, a strut ruptured and punctured the aircraft's starboard float causing it to tip over to that side. The propeller lopped off half the float and the machine broke up, resulting in the aircraft sinking. Fortunately, Tudhope scrambled to safety and the mail was rescued, eventually reaching its destinations by rail.

Following a subsequent salvage, the Vanessa was considered uneconomical to repair and was abandoned.

Despite a very brief career, the Vanessa has the distinction of being one of the first enclosed cabin aircraft to be designed and built in Canada and the first aircraft to be used in an experimental airmail flight in Canada.

[edit] Specifications (Vanessa)

Data from RCAF.com[1]

General characteristics

  • Length: 30 ft (9.14 m)
  • Wingspan: 35 ft 3 in (10.74 m)
  • Height: 12 ft 4 in (3.76 m)
  • Wing area: 410 sq ft (38.1 sq m)
  • Empty weight: 2,120 lb (963 kg)
  • Loaded weight: lb (kg)
  • Useful load: lb (kg)
  • Max takeoff weight: 3,400 lb (1,543 kg)

Performance

Armament none

[edit] See also

[edit] References

[edit] Notes

  1. ^ RCAF.com.

[edit] Bibliography

  • Molson, Ken M. and Taylor, Harold A. Canadian Aircraft Since 1909. Stittsville, Ontario: Canada's Wings, Inc., 1982. ISBN 0-920002-11-0.

[edit] External links

v • d • e
Lists relating to aviation
General
Military
Accidents/incidents
Records