California State Route 262

From Wikipedia, the free encyclopedia

State Route 262

Defined by S&HC § 562, maintained by Caltrans

Length:

1.08 mi^[1] (1.74 km)

South end:

I-880 in Fremont

North end:

I-680 in Fremont

State highways in California (list - pre-1964)
County routes in California (list)
< SR 261		SR 263 >
History - Unconstructed - Deleted - Freeway - Scenic

State Route 262, more commonly known as Mission Boulevard, is a very short state highway that connects two Interstate highways in the San Francisco Bay Area.

1 Route description
2 Route history and legislative status
3 Major intersections
4 References

[edit] Route description

SR 262 begins at its western interchange with Interstate 880 in Fremont and travels 1 mile east to its terminus and junction with Interstate 680. SR 262 was built solely to be a link between the two interstates and lies at the point that Interstates 880 and 680 are closest together in the East Bay. 2 miles north of SR 262, I-680 abruptly turns to the Northeast and into the Sunol and Livermore Valley thus making SR 262 a vital link between those valleys and the Silicon Valley to the south.

Physically SR 262 begins as a freeway rated 4 lane section for its first half miles and has one separated grade intersection with Warren Avenue. The remaining half mile is a 4-6 lane city street with two traffic lights at Warm Springs Blvd and Mojave Drive before terminating at a cloverleaf interchange at I-680.

SR 262 is unsigned along its entire route and would be totally overlooked if not for two guide signs placed in the early 2000's on south I-680 that designate the exit as "SR 262 to I-880 Mission Blvd". There is no other signage on either I-880 or I-680 that designate the road by its route number. Locals are also largely unaware of the route designation and refer to the road as Mission Blvd exclusively.

[edit] Route history and legislative status

Originally SR 262 was originally slated to run the route of present day Oakland Road from San Jose to where present day Warm Springs Blvd and Mission Blvd intersect. This plan was scrapped when State Route 17 (later I-880) was constructed. SR 262 was subsequently routed along its present route.

The original plans also call for SR 262 to be deleted from the state route list when State Route 237 to the south was completed between I-880 and I-680, however that does not appear to have occurred based on the 2 new guide signs designating Mission Blvd as SR 262. Caltrans also lists SR 262 (Mission Blvd) as part of its statewide traffic reporting.

Conversely, Cal-Nexus does not list SR 262 as part of the Mission Blvd exit on either I-680 or I-880 further calling into question whether SR 262 actually exists any longer. Caltrans has made mistakes in posting signs in the past and it is possible that the two signs on Southbound I-680 were placed in error and they have neglected to delete the route completely which would explain why SR 262 has not been signed for decades.

SR 262 is also a signed section of the Juan Bautista De Anza National Historic Trail.

[edit] Major intersections

Note: Except where prefixed with a letter, postmiles were measured in 1964, based on the alignment as it existed at that time, and do not necessarily reflect current mileage.

The entire route is in Fremont, Alameda County.

Postmile ^[2]^[3]^[4]	Destinations	Notes
R0.00	I-880 – San Jose, Oakland	Southbound exit and northbound entrance
	Gateway Boulevard	Southbound exit only
R0.39	Kato Road	Closed
North end of freeway
R0.70	Warm Springs Boulevard
	Mohave Drive
R1.07	I-680 – Livermore, Sacramento, Milpitas	Interchange