Budd Company

From Wikipedia, the free encyclopedia

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2007)

This article needs copy editing for grammar, style, cohesion, tone or spelling. You can assist by editing it now. A how-to guide is available. (November 2007)

The tone or style of this article may not be appropriate for Wikipedia. Specific concerns may be found on the talk page. See Wikipedia's guide to writing better articles for suggestions.(November 2007)

The Budd Company (now ThyssenKrupp Budd) is a metal fabricator and major supplier of body components to the automobile industry. The company's headquarters are in Troy, Michigan. It was founded in 1912 by Edward G. Budd, whose fame came from his company's invention of the 'shotweld' technique for joining pieces of stainless steel without damaging its anti-corrosion properties.

Contents 1 An automotive pioneer 2 A railroad legend 3 Train in one car 4 Almond Joys 5 Transportation innovations 6 Final years 7 Preservation 8 See also 9 References

[edit] An automotive pioneer

In 1916, Budd built one of the very first steel car bodies, for Dodge.^[1] They held an interest in Pressed Steel Company (Cowley, England), which built bodies for Ford, and Ambi-Budd (Germany), which supplied Adler, Audi, BMW, NAG and Wanderer; and earned royalties from Bliss (who built bodies for Citroën and Ford {Dagenham, England}).^[2] The Budd Company also created the first "safety" two-piece truck wheel, used extensively in World War II, and also built truck cargo bodies for the U.S. military.

[edit] A railroad legend

From the 1930s until 1989 the Budd Company was a leading manufacturer of stainless steel streamlined passenger rolling stock for a number of railroads. After briefly dabbling with French Michelin rubber-tired technology, they built the Pioneer Zephyr for the Chicago, Burlington and Quincy Railroad in 1934, and hundreds of streamlined lightweight stainless steel passenger cars for new trains in the USA in the 1930s and 1940s. In 1949, Budd built ten prototype stainless steel R-11 subway cars for the New York Board of Transportation^[3]; these were intended for the Second Avenue Subway^[4]. In the 1950s Budd built a set of two-story or high-level cars for the Santa Fe's El Capitan and Super Chief passenger trains, which became the prototypes for the Amtrak Superliner cars of the 1980s. Budd also built two-story gallery passenger cars for Chicago-area commuter service on the Milwaukee Road, Burlington Route, and Rock Island lines during the 1960s and 1970s; most of these cars are still in service on today's Metra routes. Stainless steel Budd cars originally built for the Canadian Pacific Railway's 1955 train The Canadian are still in service with Via Rail Canada. Since 1951 two formations of 6 Budd cars operated by Ferrobaires, run a weekly service called "El Marplatense" from Buenos Aires to the ocean-side city of Mar del Plata in Buenos Aires Province, Argentina, the cars were originally built for the Chesapeake & Ohio RR. Budd-patented processes and designs were also used in France and Belgium after World War 2 to construct SNCF electric-powered multiple-unit cars, push-pull suburban trainsets, Wagons-Lits [CIWL] sleeping cars and even a small class of SNCF and SNCB four-current six-axle high speed electric locomotives for Trans Europ Express service between Paris, Brussels and Amsterdam.

[edit] Train in one car

In 1949, Budd introduced the Rail Diesel Car or RDC, a stainless steel self-propelled 'train in one car' which both prolonged rail service on many lightly populated railway lines and provided a flexible, air conditioned car for suburban commuter service. More than 300 RDCs were built, and some are still in service in Canada, the USA and Australia. In the 1960s, Budd built the Pioneer III electric m.u. coach for intercity travel. Six were built and were bought by the former Pennsylvania Railroad, but in 1966, these Pioneer III cars, later called "Silverliner I" cars, were replaced with the "Silverliner II" cars, which used the Pioneer III body, but with many improvements, for Philadelphia-area commuter rail service on both the PRR and Reading Company lines. Budd was also contracted to build the original Metroliner m.u. coaches for Washington-New York City service on the Northeast Corridor, but these have since been either retired or de-powered and used as cab cars. Currently, the "Silverliner II" cars, which are now slated to be retired starting in 2010 with the new ROTEM-built "Silverliner V" models, have a top speed of 90 mph, but ran at up to 100 mph when the PRR used them for Philadelphia-Harrisburg service. The Metroliner m.u. cars operated at 110 to 125 mph, although breakdowns in the system led Amtrak to derate them to 90 mph, despite the advertised speed of 150 mph – speeds regularly achieved by Amtrak's TGV-based Acela service. Since their retirement from regular service, Amtrak has used the Metroliner m.u. coaches as cab-coaches on various services.

[edit] Almond Joys

In 1960, Budd manufactured the first stainless steel production subway cars for Philadelphia's Market-Frankford Line. 270 M-3 cars (nicknamed the "Almond Joys" because the four hump-shaped ventilators on top of the roof of each car evoked the famous Almond Joy candy bar marketed by The Hershey Company) were jointly owned by the City of Philadelphia and the Philadelphia Transportation Company (now Southeastern Pennsylvania Transportation Authority). 46 single units and 112 married pairs (the pairs were of "mixed" marriage because the odd-numbered car came with General Electric motors and equipment was permanently coupled to the even-numbered car, which had Westinghouse motors and equipment). These cars were replaced with more modern, air-conditioned M-4 units in 1997-99, although some cars were retrucked (the Market-Frankford line is a broad-gauge line with the running rails 5' 2.5" apart) and used on the Norristown High Speed Line (a standard railroad gauge line, with running rails 4' 8.5" apart) until 1995.

[edit] Transportation innovations

In 1930, the company made its first foray into the aviation industry by signing contracts to manufacture aircraft wheels & stainless steel wing ribs. Enea Bossi joined the company as the head of stainless steel research to supervise the design and construction of the 4-seat biplane amphibious Budd BB-1 Pioneer – the first aircraft with a structure built out of stainless steel.^(photo) This was the first aircraft for the Budd Company, and it made its first flight in 1931^[5]. Built under Restricted License NR749,^[6] its design utilized concepts developed for the Savoia-Marchetti S-31 and was powered by a single 210 horsepower Kinner C-5 five-cylinder radial engine.^[7]

The stainless steel construction process for the BB-1 was patented in 1942.^[8] At the time, stainless steel was not considered practical; and only one BB-1 was built. It logged about 1,000 flying hours while touring the United States and Europe. In 1934, this plane was stripped of its fabric covering and its lower wing, and was mounted outside the Franklin Institute in Philadelphia, where it remains to this day as the longest continuous display of any airplane.^[6] The plane has been memorialized in the children’s book Spirited Philadelphia Adventure by Deirdre Cimino.^[9][10]

During World War II, Budd designed and built the RB-1 transport airplane for the U.S. Navy using much stainless steel in place of aluminum. Only 25 were built but, after the war, 14 aircraft found their way to the fledgling Flying Tiger Line and provided a good start for that company.

In 1962, Budd produced a fully functional concept car, the XR-400, for evaluation by American Motors Corporation (AMC). It was designed to use AMC's existing chassis for the sporty-model market segment before the introduction of the Ford Mustang. The proposed car did not enter production.

There is an irony to the XR-400 story. Budd tried to sell the idea to Ford first. In 1961 Budd combined a 1957 Thunderbird body with a 1961 Ford Falcon chassis to produce a sporty convertible. When Ford turned them down, Budd shifted focus to AMC. Ford went on to base the Mustang on the Falcon chassis.^{[citation needed]}

In 1966, Budd designed and manufactured a front disc brake system for Chrysler and Imperial automobiles, used for the 1967 and 1968 model years.

[edit] Final years

Budd also built two series of "L" cars for the Chicago Transit Authority, the 2200s (1969) and the 2600s (1981–1987). The New York City Subway R32 (1964-1965), the first PATCO Speedline cars (1968), Long Island Rail Road/Metro-North Railroad M-1/M-3 (1968–1973,1984-1986) and M-2 (1972-1977), SEPTA Silverliner IV and NJ Transit Arrow II (1974-1975), NJ Transit Arrow III (1978), Baltimore Metro and Miami Metrorail cars (1983) were also built by Budd.

Amtrak's 492 Amfleet I and 150 Amfleet II cars were built by Budd in 1975-77 and 1981-83. The Amfleet body was recycled for usage in the SPV2000, a modernized diesel passenger car which was very problematic, saw only three buyers (Amtrak, Metro-North and Connecticut Department of Transportation), and saw very premature retirements within 15 years. The fallout from the SPV2000 furthered the decline of the company.

In the early 1980s, Budd reorganized its rail operations under the name TransitAmerica, this name appearing on the builderplates of the Baltimore/Miami cars and Chicago's later order of 2600-series cars (but not the LIRR/MNCR M-3s). The new name did not save the company, and in April 1987 Budd ended all railcar production at its Red Lion plant in Northeast Philadelphia and sold its rail designs to Bombardier Transportation. Many of its engineers joined the staff of the Philadelphia office of Louis T. Klauder and Associates, a local railway vehicles and systems engineering consulting firm.

[edit] Preservation

Numerous Budd built railcars are preserved around the country, either in museums or by private owners, many of who run them in charter service. Their excellent quality of construction and elegant design have made them highly prized.

The Railroad Museum of Pennsylvania has a number of Budd-built cars in its collection in Strasburg, Pennsylvania: The 1937 observation car built for the Reading Company "Crusader", Lehigh Valley Railroad rail diesel car of 1951, a pair of 1958 "Pioneer III" cars for the Pennsylvania Railroad, and Pennsylvania Railroad 860, a Metroliner cafe-coach built in 1968.

The Illinois Railway Museum is home to the Nebraska Zephyr articulated train, along with several Budd-built passenger cars.

The Western Pacific Railroad Museum at Portola, California features several cars from the California Zephyr, including dome-lounge car "Silver Hostel" and diner "Silver Plate".

[edit] See also

• Slumbercoach
• Tokyu Car Corporation - member of licencee for stainless steel body manufacturing

[edit] References

• R-11 Datasheet
• "A Museum Quality Car for a Subway Yet Unbuilt" NY Times March 24, 2007