Brummer class cruiser

From Wikipedia, the free encyclopedia

AlternateTextHere
Class overview
Builders: AG Vulcan Stettin
Built: 1915-1916
In commission: 1916-1919
Completed: 2
General characteristics
Displacement: 4,385 tonnes standard
5,856 tonnes full load
Length: 140 m (459 ft 4 in)
Beam: 13.2 m (43 ft 4 in)
Draft: 6 m (19 ft 8 in)
Propulsion: 2 shaft geared steam turbines, 6 oilers, 33,000hp
Speed: 28 kn (52 km/h)
Complement: 309
Armament: 4 × 150 mm (5.9 in) guns (4×1)
2 × 88 mm (3.5 in) AA guns (3×1)
2 × 500 mm (20 in) torpedo tubes
400 mines
Armor: Belt: 44 mm (1.7 in)
Deck: 15 mm (0.59 in)
Conning tower: 100 mm (3.9 in)

The Brummer class were a group of two light minelaying cruisers built for the Imperial German Navy in World War I. When the war broke out the Germans had only two older minelaying cruisers; Albatros and Nautilus. Although most German cruisers were fitted for minelaying, a need for fast specialised ships existed. The Imperial Russian Navy had ordered a set of steam turbines for the Borodino class battlecruiser Navarin from AG Vulcan. This machinery was confiscated on the outbreak of war and used for these ships. Both vessels were built by AG Vulcan in Stettin.

[edit] Ships

Ship laid down Launched Completed Fate
SMS Brummer 1915 11 December 1915 2 April 1916 Scuttled in Scapa Flow 19 June 1919
SMS Bremse 1915 11 March 1916 1 July 1916 Scuttled in Scapa Flow 19 June 1919

[edit] Service

The ships served with the High Seas Fleet (II and IV Scouting Groups) and carried out several minelaying sorties. On 17 October 1917 the two ships attacked a British convoy sailing between Britain and Norway. The Germans sunk the British destroyers HMS Strongbow and HMS Mary Rose and nine merchant ships. The two ships were interned at Scapa Flow and scuttled with the High Seas Fleet in June 1919.

[edit] References