Breathing performance of regulators

From Wikipedia, the free encyclopedia

A diving regulator is a device that reduces the high pressure in a diving cylinder to the same pressure as the scuba diver's surroundings. The breathing performance of regulators is a factor in choosing a suitable regulator for the type of diving to be undertaken, as it indicates the ability of a regulator to meet the demands placed on it at depth and under high breathing loads. It is desirable that breathing from a regulator requires low effort even when supplying large amounts of air. It is also recommended that it breathe smoothly without any sudden changes in resistance while inhaling or exhaling. Although these factors may be judged subjectively, it is convenient to have a standard by which the many different types and manufactures of regulators may be compared.

ANSTI has developed a testing machine that measures the inhalation and exhalation effort in using a regulator; publishing results[1] of the performance of regulators in the ANSTI test machine has resulted in big performance improvements.

[edit] EU Standard

A typical graph produced when testing the breathing performance of a diving regulator
A typical graph produced when testing the breathing performance of a diving regulator

In the European Union the standard EN250:2000 <Respiratory equipment. Open-circuit self-contained compressed air diving apparatus. Requirements, testing, marking> defines minimum performance standards for "Open-circuit self-contained compressed air diving apparatus". [2]

The standard contains limits on inhalation and exhalation pressures and overall work of breathing.

The following are under test conditions of a breathing rate of 62.5 liters per minute and an ambient pressure of 6 bar (600 kPa):

  • Work of breathing: <3.0 joules per liter
  • Peak respiratory pressure: ±25 mbar (±2.5 kPa) (inhalation or exhalation)
  • Inhalation work of breathing: <0.3 joule per liter
  • Pressure spikes with no measurable positive work of breathing: <10 mbar (1 kPa)
  • Pressure spikes with measurable positive work of breathing: <5 mbar (0.5 kPa)

Although a regulator meeting the above limits will supply sufficient air where the first stage feeds a single second stage, it is not necessarily capable of supplying sufficient air in all circumstances when a single first stage feeds two second stages simultaneously.[3]

[edit] References

  1. ^ The ANSTI Machine: Evaluating A Regulator's Breathing Characteristics - Scuba Diving Magazine.
  2. ^ ISBN 058035713 9 British Standards Institution
  3. ^ HSE publishes research on performance of 'octopus' regulators for scuba diving.


 Please help improve this article or section by expanding it.
Further information might be found on the talk page or at requests for expansion. (January 2008)