Breastwork monitor

From Wikipedia, the free encyclopedia

The term breastwork monitor was used as a description of a number of ships designed by Sir Edward Reed, the Chief Constructor of the Royal Navy between 1863 and 1870.

The term "monitor" was directly derived from the American ship of that name, the USS Monitor designed by John Ericsson which had been active in the American Civil war. The American ships were very stable, and difficult to damage by gunfire, because of their very low freeboard. This, however, caused them to behave, some said, as a "half-tide rock", with the ever present risk of being swamped in a sea should water gain access to the interior through hatches, turret bases or other openings in the deck.

Reed proposed to overcome this risk by the addition of an armoured breastwork. This was an armoured superstructure of moderate height (7 ft in HMVS Cerberus), centrally placed on the ship and containing within its armoured circumference the gun turrets, bridge, funnels and all other upper deck appurtenances needed to operate the ship.

The presence of this breastwork allowed the ship to operate without fear of being flooded by waves breaking over the deck, and allowed the main armament to be positioned at a greater height than in the American monitors, gaining thereby greater command and range.

HMVS Cerberus, first Breastwork Monitor, on completion in 1869

[edit] References

This article does not cite any references or sources. (February 2008)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.