Bleed (printing)

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (July 2007)
Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

Bleed is a printing term that refers to printing that goes beyond the edge of the sheet after trimming. The bleed is the part on the side of your document that gives the printer that small amount of space to move around paper and design inconsistencies.

Bleeds in the USA and UK generally are 1/8 of an inch from where the cut is to be made. Bleeds in Europe generally are 3 to 5mm from where the cut is to be made. This can vary from print company to print company. Some printers ask for specific sizes; most of these companies place the specific demands on their website.

Bleed information refers to elements outside the finished piece. Often a printer requires bleed information on pieces that have bleed to allow for "printer bounce" when cutting a job down to size. Failing to provide bleed information and crop marks can result in finished pieces showing a thin area of white on the edge.

Die-cuts sometimes require a 1/4" bleed from where the page is intended to be cut; this is because of the possible movement of the paper during the die-cut procedure.

Full bleed is printing from one edge of the paper to the other without the standard borders by which most personal printers are limited. This is useful for printing brochures, posters, and other marketing materials. Often the paper is trimmed after printing to ensure the ink runs fully to the edge and does not stop short of it.

For Web designer, that means they have to consider it on the design and add a margin on the left and on the right (about 10 pixels) even if they want to have a 100% width page.