BL R-Series engine

From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (December 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

The R-Series is an internal combustion engine introduced by British Leyland in 1983 for the then-new Austin Maestro. It was only produced in one capacity—1.6 litres.

The engine was essentially a lightly modified version of the E-series unit found in the Maxi and Allegro. The main differences over the older engine are to the sump and gearbox mounting flange, which were adapted to accept a traditional "end-on" transmission unit which had been bought from Volkswagen in place of the traditional BMC transmission-in-sump arrangement.

The R-Series was mainly a stop gap, and had a very short production run that lasted barely two years. BL had been working on a more substantially revised version of the E-Series, but this was not ready for production in time for the Maestro's already badly delayed launch. The company was instead forced into launching the Maestro with the half-developed power unit which cost the company dearly—R-Series equipped Maestros soon gained a reputation for hot starting problems, cylinder head gasket failures (endemic to the E-Series also), and premature crankshaft failure. Because the E-Series was turned through 180 degrees in order to accommodate an end-on transmission, the R-Series was fitted to the Maestro with the carburettor facing the front of the car, which also led to a reputation for carburettor icing in cold weather.

The R-Series was superseded in 1984 by the vastly superior S-Series.