Bead weaving

From Wikipedia, the free encyclopedia

Bead weaving using seed beads can be done either on a loom or using one of a number of off-loom stitches.

[edit] On-loom bead weaving

When weaving on a loom, the beads are locked in between the warp threads by the weft threads. Although a heddle can be used as in ordinary weaving, the most common technique requires two passes of the weft thread. First, an entire row of beads is strung on the weft thread. Then the beads are pressed in between the warp threads. The needle is passed back through the beads above the warp threads to lock the beads into place. The most difficult part of loomwork is finishing off the warp threads.

Although loomed pieces are typically rectangular, it is possible to increase and decrease to produce angular or curvy shapes. Fringe can also be added during weaving or before the piece is removed from the loom.

Bead looms vary in size and are typically made of wood or metal. Usually, a comb or spring is used to hold the warp threads a bead-width apart. Some looms have roller bars that allow the weaver to produce pieces that are longer than the loom. Most looms are meant to sit on a table, but some have floor stands or are meant to sit in the lap.

[edit] Off-loom bead weaving

Off-loom bead weaving is a family of beadwork techniques in which seed beads are woven together into a flat fabric or a three-dimensional object such as a ball, clasp, or box. All off-loom techniques can be accomplished using a single needle and thread (no warp threads), but some have two-needle variations.

Different stitches produce pieces with distinct textures, shapes, and patterns. There are a number of different off-loom bead stitches, including:

[edit] References