Talk:Autovon
From Wikipedia, the free encyclopedia
Could somone add some dates to this article if they have them? Like when construction on the Autovon started, when it finished, when the military started using it, when they abandoned it, etc.?
Contents |
[edit] Silver Box
Silver box redirects here. Shouldn't we include something about them? ;-) --67.172.99.160 00:31, 31 July 2005 (UTC)
[edit] Anarchist eBook entry
From the Anarchist's eBook: Brodo 05:20, 24 August 2005 (UTC)
Silver Box Plans by the Jolly Roger
Introduction:
First a bit of Phone Trivia. A standard telephone keypad has 12 buttons.
These buttons, when pushed, produce a combination of two tones. These tones represent the row and column of the button you are pushing.
1 1 1
2 3 4
0 3 7
9 6 7
697 (1) (2) (3)
770 (4) (5) (6)
851 (7) (8) (9)
941 (*) (0) (#)
So (1) produces a tone of 697+1209, (2) produces a tone of 697+1336, etc.
Function:
What the Silver Box does is just creates another column of buttons,
with the new tone of 1633. These buttons are called A, B, C, and D.
Usefulness:
Anyone who knows anything about phreaking should know that in the
old days of phreaking, phreaks used hardware to have fun instead of other people's Sprint and MCI codes. The most famous (and useful) was the good ol' Blue Box. However, Ma Bell decided to fight back and now most phone systems have protections against tone-emitting boxes. This makes boxing just about futile in most areas of the United States (ie those areas with Crossbar or Step-By-Step). If you live in or near a good-sized city, then your phone system is probably up-to-date (ESS) and this box (and most others) will be useless. However, if you live in the middle of nowhere (no offense intended), you may find a use for this and other boxes.
Materials:
1 Foot of Blue Wire
1 Foot of Grey Wire
1 Foot of Brown Wire
1 Small SPDT Switch (*)
1 Standard Ma Bell Phone
(*) SPDT = Single Pole/Double Throw
Tools:
1 Soldering Iron
1 Flat-Tip Screwdriver
Procedure:
(1) Loosen the two screws on the bottom of the phone and take the casing off. (2) Loosen the screws on the side of the keypad and remove the keypad from the mounting bracket. (3) Remove the plastic cover from the keypad. (4) Turn the keypad so that *0# is facing you. Turn the keypad over. You'll see a bunch of wires, contacts, two Black Coils, etc. (5) Look at the Coil on the left. It will have five (5) Solder Contacts facing you. Solder the Grey Wire to the fourth Contact Pole from the left. (6) Solder the other end of the Grey Wire to the Left Pole of the SPDT Switch. (7) Find the Three (3) Gold-Plated Contacts on the bottom edge of the keypad. On the Left Contact, gently seperate the two touching Connectors (they're soldered together) and spread them apart. (8) Solder the Brown Wire to the Contact farthest from you, and solder the other end to the Right Pole of the SPDT Switch. (9) Solder the Blue Wire to the Closest Contact, and the other end to the Center Pole of the SPDT Switch.››(10) Put the phone back together.
Using The Silver Box:
What you have just done was installed a switch that will change
the 369# column into an ABCD column. For example, to dial a 'B', switch to Silver Box Tones and hit '6'.
No-one is sure of the A, B, and C uses. However, in an area with an
old phone system, the 'D' button has an interesting effect. Dial Directory Assistance and hold down 'D'. The phone will ring, and you should get a pulsing tone. If you get a pissed-off operator, you have a newer phone system with defenses against Silver Boxes. At the pulsing tone, dial a 6 or 7. These are loop ends.
-= Exodus =-
[edit] Other source
The Autovon used the 1633 Hz column of tones, a part of the DTMF standard set that rarely (never?) appears on consumer telephones. The silver box adds these tones to a regular telephone. I suppose it could in theory work on an Autovon network. If anyone has tried this they probably never came out to say whether it was successful or not.
In civilian networks these keys sometimes had special uses. Holding one of the keys while connecting to the operator would drop you into a special system. It sounds like it was mainly used by telco engineers to diagnose their networks, but that is just a guess and i would like to find out more.
The service that was provided is described in this article:
I found particularly interesting that military prioritization was all on good faith. They may have had strict regulations on what priority could be used for a type of call, but it was not enforced by the Autovon system. Presumably abuse could get a write-up if the culprit was caught.
--Kevin L'Huillier 00:00, 5 June 2006 (UTC)
