Wikipedia:Articles for creation/2007-12-12
From Wikipedia, the free encyclopedia
All article submissions on this archive page have now been evaluated. For more unreviewed requests, see Unreviewed articles for creation request pages. |
This is a closed archive of past submissions. Do not edit the contents of this page. If you wish to make a new submission, or resubmit an older submission, please do so at articles for creation. |
Please now follow the link back to Wikipedia:Articles for creation.
-
-
- Submitters: Please do not remove other submissions from this page. This page is a collection of many people's submissions.
- Reviewers: Please check yesterday's submissions as well as looking at today's, and also check the backlog of unreviewed articles from all prior days.
-
[edit] Biological and Chemical Warfare
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Chemical WeaponsA chemical weapon is any weapon that uses a manufactured chemical to kill people. The first chemical weapon used effectively in battle was chlorine gas, which burns and destroys lung tissue. Chlorine is not an exotic chemical. Most municipal water systems use it today to kill bacteria. It is easy to manufacture from common table salt. In World War I, the German army released tons of the gas to create a cloud that the men would inhale then die. Modern chemical weapons tend to focus on agents with much greater killing power, meaning that it takes a lot less of the chemical to kill the same number of people. Many of them use the sorts of chemicals found in insecticides. When you spray your lawn or garden with a chemical to control aphids, you are, in essence, waging a chemical war on aphids. Many of us tend to imagine a chemical weapon as a bomb or missile that releases highly toxic chemicals over a city. (For example, the movie "The Rock" featured a scenario in which terrorists tried to launch a missile loaded with the chemical VX, a nerve toxin.) But in 1995, the group Aum Shinrikyo released sarin gas, a nerve gas, in the Tokyo subway. Thousands were wounded and 12 people were killed. No giant bombs or missiles were involved -- the terrorists used small exploding cannisters to release the gas in the subway. [edit] Biological WeaponsA biological weapon uses a bacteria or virus, or in some cases toxins that come directly from bacteria, to kill people. If you were to dump a load of manure or human waste into a town's water supply, that would be a simple form or biological warfare -- human and animal manure contain bacteria that are deadly in a variety of ways. In the 19th century, American Indians were infected with smallpox through donated blankets. A modern biological weapon would use a strain of bacteria or a virus that would kill thousands of people, Such as poisoning the water supply. Tom Clancy has explored the idea of biological terrorism in two books: "Executive Orders" and "Rainbow Six." In both books, the source of infection is the Ebola virus. the infection is spread through small aerosol cans (like those used by insecticide products to create "bug bombs") released at conventions, or through misting systems used to cool sports venues. [edit] Sourceshttp://science.howstuffworks.com/biochem-war2.htm 64.170.24.156 (talk) 00:36, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Flint Trollentino
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Grupo Fantasia
This request for creation has been declined. Please do not modify it. | |||
---|---|---|---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
|||
This is an archived discussion. Please do not modify it. |
[edit] Cockle Creek
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Cockle Creek - New South Wales Copyright violation from http://www.lakemac.infohunt.nsw.gov.au/library/lhist/suburb/lmp&p/cocklecreek.htm removed per policy. Ariel♥Gold Sources infohunt.nsw.gov.au/library
|
This is an archived discussion. Please do not modify it. |
[edit] Janice Wing
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Janice Wing has served 10 years on Niagara Falls City Council. She has two daughters: Guen Wheeler-Wing and Shonagh Colclough. [edit] Sourceshttp://www.janicewing.com/ http://www.city.niagarafalls.on.ca/city_hall/council/current_council_members.asp 24.36.55.191 (talk) 01:23, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Child development
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sourceswww.google.com www.childhooddevelopment.com Mark Lemuel R. Magno UPHSD |
This is an archived discussion. Please do not modify it. |
[edit] Said Shirian
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Background of the InventionBACKGROUND OF THE INVENTION This invention relates to ducts for housing cable and, in particular, to ducts for housing communication cable. In the placing of conventional copper telephone cable, the cable is run through a duct which is used to house and protect the cable. Prior to placing the cable in the duct a cone shaped element is passed through the duct to clear away any debris and ensure a clear passage for the cable. Also attached to the cone is an end of a cable pull-line. Once the cone and attached end of the pull-line are through the duct, the other end of the line is affixed to a telephone cable and the cable pulled through the duct. In order to pass the cone through the duct, a pressure differential is created in the duct. This requires that the individual components of the duct and their interconnections provide an air-tight passage. Otherwise, air leaks will occur and insufficient pressure will be developed to pull the cone through the line. As the telephone industry has turned to the use of fiber optic cable for telephone transmission, it has had to develop techniques for placing the smaller diameter fiber optic cable. These techniques have continued to utilize the pressurized cone procedure for pulling cable through the ducts, since this procedure results in minimizing installation time. At present, placing of fiber optic cable is accomplished by first pulling three one inch inner ducts through the usual four inch copper cable duct. The pressurized cone procedure is then used to pull a fiber optic cable through a first duct and to pull a small copper cable through a second duct. The copper cable is needed to provide talking channels between various installation points. The third inner duct serves as a spare, since it cannot be used without an associated cable for talking channels. In many cases, the pulling of the three one inch ducts through the four inch duct is extremely difficult and in certain cases not possible to accomplish. This is particularly true where the four inch duct has vertical and horizontal bends. These bends may be created when placing the duct and may be a result of cable congestion and/or location. In order to provide for an additional fiber optic cable in a conventional four inch duct and to avoid the material and labor costs of providing and pulling three inner ducts, it has now been proposed that the four inch duct itself be modified by segmenting the duct into four one inch compartments, two of which for receiving fiber optic cable and the other two of which for receiving associated talking channel copper cable. While such a segmented duct would increase the cable capacity by one and would not require separate inner ducts, the duct must also be designed so that pulling of each cable through its associated compartment can be achieved utilizing the aforementioned pressurized cone procedure. This requires that the individual compartments be air-tight and that the duct be connectible to like ducts in a manner to preserve this condition. It would also be desirable if such a segmented duct could be further designed so that connection to similar ducts automatically aligns corresponding compartments. Finally, it would be advantageous if the duct could be made in long lengths, while still being capable of being cut to shorter lengths which when joined to similar ducts preserves the alignment as well as air-tightness of the corresponding compartments. It is therefore an object of the present invention to provide a cable duct having one or more of the above-mentioned features. It is a further object of the present invention to provide a segmented duct for fiber optic cable wherein the duct can be joined to similar ducts, while maintaining an air-tight condition for the individual compartments of the ducts. It is yet a further object of the present invention to provide a duct of the last mentioned type which can be of long length and which can be cut into shorter lengths which can then be joined to similar ducts so as to maintain alignment of corresponding compartments and an air-tight condition. SUMMARY OF THE INVENTION In accordance with the principles of the present invention, the above and other objects are realized in a duct comprising a tubular member having a barrel portion and a bell portion, the latter bell portion having a diameter which is greater than that of the barrel portion, and means disposed in the barrel portion for segmenting the barrel portion into compartments. The segmenting means is itself comprised of a first section and a second section, the second section extending into the bell portion and having an end adapted to interfit with the first section. In this manner, if the barrel portion of a first duct constructed in accordance with the invention is inserted into the bell portion of a second duct also constructed in accordance with the invention, the first section of the segmenting means of the first duct will interfit with the end of the second section of the segmenting means of the second duct. As a result, the ducts will be connected in a positive manner which tends to maintain the air-tight nature of the compartments at the connection point. In further accord with the invention, the barrel portion and bell portion of the tubular member of the invention are provided with mating first and second alignment means. These alignment means are situated such that the interfitting of the first and second sections of first and second ducts is realized in a manner which automatically aligns corresponding compartments of the ducts once the alignment means are brought into mating relationship. By use of the alignment means in combination with the segmenting means and its interfitting first and second sections, connection of like ducts is thus realized in a way which automatically preserves compartment alignment and air-tightness. In the embodiment of the invention to be disclosed hereinafter, the segmenting means comprises one or more pairs of spaced first walls which together form the first section. The second section comprises a single second wall for each pair of first spaced walls. Each single second wall has a thickness which is less than the spacing between its corresponding pair of spaced first walls so as to be able to tightly fit therebetween. The alignment means, on the other hand, comprises diametrically opposing flanges disposed on the barrel portion outer surface and an aligned slot in the bell portion for each such flange. Accordingly, when the flanges of the barrel portion of a first duct are inserted into the slots in the bell portion of a second duct, the second walls in the bell of the second duct will interfit between the corresponding spaced first walls in the barrel of the first duct to provide an interfitting tongue and groove like connection. BRIEF DESCRIPTION OF THE DRAWINGS The above and other features and aspects of the present invention will become more apparent upon reading the following detailed description, in conjunction with the accompanying drawings, in which: FIG. 1 shows a duct in accordance with the principles of the present invention; FIG. 2 shows a cross section of the duct of FIG. 1 taken across the line 2--2; FIG. 3 shows a cross section of the duct of FIG. 1 taken along the line 3--3; FIG. 4 shows the second section of the segmenting means of the duct of FIG. 1 which is utilized to connect the duct to other like ducts; and FIG. 5 shows a cross section similar to that of FIG. 2 of a modified version of the duct of FIG. 1. DETAILED DESCRIPTION In FIG. 1, the duct 1 is a duct made in accordance with the principles of the present invention. The duct 1 is in the form of a tubular member and comprises a cylindrical barrel portion 2 and a cylindrical bell portion 3. The barrel portion is of length l 1 and has inner and outer diameters D 1 and D 2 . The bell portion 3 is of shorter length l 2 but of larger inner and outer diamter D 3 and D 4 then the barrel portion. The bell portion serves to receive the barrel portion of a like duct when these ducts are to be interconnected. In accordance with the principles of the present invention, a segmenting means 4 is disposed within the barrel section 2. The segmenting means 4 includes a first section 4a which extends through the barrel portion 2 and which comprises a central element 4a 1 , and one or more pairs of first spaced walls, 4a 2 -4a 5 . Each pair of spaced walls comprises like first walls 4a 6 having a radially uniform spacing s over their entire lengths. The walls 4a 6 are flat and extend radially from the element 4a 1 to the inner wall 2a of the barrel portion 2. They further extend axially over substantially the entire length of the barrel portion. They, therefore, divide the barrel portion into four separate and air-tight compartments 5, 6, 7 and 8, each suitable for receiving its own telephone cable. At the end 2b of the barrel 2 the segmenting means includes a second section 4b. This section is formed by bringing the pairs of walls 4a 2 -4a 5 together to form a set of single second walls 4b 2 -4b 5 . As shown in FIG. 4, which, for simplicity, illustrates only the first pair of walls 4a 4 and their corresponding second wall 4b 4 , the second walls 4b 2 -4b 5 extend into the bell for a distance x beyond the point of termination of the element 4a 1 . Furthermore, as shown in FIG. 3, these walls are spaced from the inner surface 3a of the bell by a distance y equal to one-half the difference between the inner diameter D 1 and the inner diameter D 3 of the barrel and bell portions 2 and 3, respectively. In accordance with the invention, the end of the second section 4b of the segmenting means is adapted to interfit with the first section of the segmenting means. This is accomplished in the present case by selecting the thickness t of each of the single walls 4b 2 -4b 5 to be less than the spacing s between the corresponding pairs of walls 4a 2 -4a 5 . Preferably, this difference is such that each pair of walls 4a 2 -4a 5 can be inserted over their corresponding wall 4b 2 -4b 5 in a tightly-engaging force-fitting manner. In addition to the segmenting means 4, the barrel and bell portions 2 and 3 of the duct 1 are provided with cooperating alignment means. In particular, the barrel 2 supports on its outer surface 2c flanges 9a and 9b. These flanges are diametrically opposite and extend over the length of the barrel and in parallel with the opposing pairs of walls and 4a 2 and 4a 4 . The bell 3, in turn, is provided with corresponding slots 11a and 11b in its wall. These slots run from the terminating point of the associated flange 9a and 9b to the end of the bell. As can be appreciated, by utilizing the above-described configuration of the duct 1 for two or more ducts, these ducts can now be connected end-to-end such that corresponding compartments 5, 6, 7 and 8 of the ducts align and remain air-tight. In particular, by inserting the barrel portion of a first duct having the configuration of the duct 1 into the bell portion of a second duct also having this configuration, the spaced walls 4a 2 -4a 5 of the first duct align with and tightly fit over the walls 4b 2 -4b 5 of the second duct. This tongue and groove type fit, moreover, exists over the distance x (see FIG. 4) and, thus, provides a distance of approximately 2x over which air must now travel before it can leak into another compartment. In actual practice, when two such ducts are to be joined, a cement material is applied to the barrel portion, including the pairs of walls 4a 2 -4a 5 , of the first duct and to the bell portion, including the walls 4b 2 -4b 5 , of the second duct. The ducts are then joined as aforementioned, resulting in cemented connections over the tongue and groove interfit of walls 4b 2 -4b 5 and spaced walls 4a 2 -4a 5 . Because each of the connections is now over a distance 2x, the likelihood of leakage of air from one duct compartment to the next is greatly decreased, since it is highly unlikely that there would be a failure of the cement to adhere at all points over the entire 2x distance. Accordingly, an improved air-tight connection with automatic alignment is realized utilizing the configuration of the duct 1 of the invention. It is also advantageous in accord with the invention to provide the barrel 2 of the duct 1 with a uniform cross section over its entire length l 1 . By this measure, the duct 1 can be cut anywhere along its length and it will still have spaced walls 4a 2 -4a 5 at its cut end which will tightly fit the walls 4b 2 -4b 5 of another like duct. The shorter length duct can, thus, now be readily joined to another like duct in the manner described above to obtain a composite duct having aligned air-tight compartments. FIG. 5 shows a cross-section similar to that of FIG. 2 of a duct like the duct of FIG. 2, except for a modification of the section 4a of the segmenting means 4. In particular, in FIG. 5, the section 4a has been modified by eliminating the element 4a 1 . As a result, each wall 4a 6 of the pairs of walls 4a 2 -4a 5 intersects with a further wall 4a 6 of another pair of walls in L-shaped configuration. In practice of the invention, the bell and barrel portions and the segmenting means of the duct may be formed from an integral member comprised of polyvinyl chloride (PVC), fiberglass or similar types of materials. The pairs of walls 4a 2 -4a 5 of the segmented means, in turn, might typically have a thickness of 0.045 inches and a spacing of 0.10 inches. The walls 4b 2 -4b 5 in such case would have a thickness of approximately 0.09 inches. The lengths l 1 and l 2 might also be 20' and 3", respectively while the dimension x might be 0.5 inches. Finally, the cement used to join like ducts might be comprised of a solvent and plastic material. Conventional cements of this type are manufactured and sold by various manufacturers. As above-indicated, the duct of the invention can be made in long lengths of approximately 20' or longer. As a result, the duct can undergo vertical and horizontal bending, thereby allowing for flexibility in connection. Furthermore, the supporting points provided by the walls 4a 6 give the duct increased structural strength. It, therefore, is more resistant to deformation resulting from external pressures. The duct of the invention provides significant cost advantages over the above-described prior procedure of utilizing three inner ducts in the conventional four inch duct. Firstly, material costs are reduced, since the need for three separate inner ducts is eliminated. Secondly, labor and operating costs are also reduced, since mobilization costs (opening and closing manholes, pumping water, testing for gas, etc.) are minimized and since placing and rodding of the three inner ducts is avoided. Finally, capital costs are reduced, since duct space is maximized and new construction can be avoided or at least delayed. It should be noted that while the duct of the invention has been described in terms of its use in housing fiber optic communication cable, the duct of the invention can also be used to house any other types of cable. In particular, the duct can advantageously be used to house cable having comparable dimensions as fiber optic cable. Additionally, the duct can be used to house cable intended for underground as well as above the ground placement. The duct can also serve as a riser duct in new commercial or residential buildings where the allocated space for ducts is very limited. In all cases, it is understood that the above-identified arrangement are merely illustrative of the many possible specific embodiments which represent applications of the present invention. Numerous and varied other arrangemnts can readily be devised in accordance with the principles of the present inventon without departing from the spirit and scope of the invention. [edit] Sources216.165.11.84 (talk) 02:48, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] polish orliks
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] SourcesPolish Orliks "Facinating orliks of the Ukraine" by K.D Spurling Ukrainian Pigeons Skycutters www.ukrainianpigeons.com
|
This is an archived discussion. Please do not modify it. |
[edit] Micah Reed
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sourceshttp://www.ojaipost.com/sports/ 76.167.233.59 (talk) 06:42, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Sessilee Lopez
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
Sessilee has since modeled for numerous magazines including Pop, W. Allure, Harper's Bazaar, Elle, Vibe, American Vogue, Italian Vogue, French Vogue, Japanese Vogue, Trace, Deutsch, V, Essence, Interview, Wade, WWD, Elle Accessories and New York Times Magazine and plenty of others. She has walked the runways for top designers including Fendi, Armani, Lagerfeld Galleries, Zac Posen, Jean Paul Gaultier, Peter Som and many more. She has been photographed by only the best photographers in the world which include Steven Meisel, Paolo Roversi, Alexi Hay, Karl Lagerfeld, Gilles Bensimon, Peter Lindberg, Mario Sorrenti, Michael Thompson, David Sims, Nicholas Moore, Mikeal Jansson, Patrick Demarcheller, Solve Sundsbo, Mario Testino and Alexi Lumbomirski. Sessilee is currently represented by Major Models in Paris and has appeared in movies and television shows in the United States. [edit] Sourceshttp://www.fashionmodeldirectory.com/models/Sessilee_Lopez http://www.thefashionspot.com/forums/f52/sessilee-lopez-23296-19.html http://supermodels.nl/sessileelopez http://www.style.com/peopleparties/modelsearch/thumb/person2326 http://models.com/oftheminute/?p=498 http://nymag.com/fashion/fashionshows/05/spring/models/7.htm http://forsurecouture.blogspot.com/2007/02/its-not-j-lo-its-s-lo.html http://www.hintmag.com/mm/mm75.php
|
This is an archived discussion. Please do not modify it. |
[edit] Saleisha
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. [edit] Sources124.176.84.73 (talk) 06:55, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Morgan Kennedy
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
Height: 5 ft 7 in Weight 112 lbs Eye Color Blue Hair Color Blonde Dress Size 2 Shoe Size 7 Measurements 34-24-34 [edit] Sourceswww.morgankennedy.net http://www.maximonline.com/hotties/votingprofile.aspx?id=11666 http://www.savvy.com/savvy_girls/featured/morgan_kennedy_blonde_ambition 69.200.227.192 (talk) 07:02, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Alexandre Owens
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Ikaw Lang ang Mamahalin
This request for creation has been declined. Please do not modify it. | |
---|---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. {{[[Template:infobox Television |
infobox Television
]]}} Ikaw Lang ang Mamahalin'is a past soap opera or Philippines drama of GMA 7. It tells the story of a young lady who suffered from amnesia and was almoast left with nothing but soon she found out that she was the daughter of a rich businessman. It tells a story of how a young woman survived all the challenges in life including losing someone she loves and protecting her life against the people who like to take her position. [edit] Cast and Characters[edit] Starring
[edit] With
[edit] Featuring
[edit] Also Starring
[edit] Trivia{{trivia}}
|
This is an archived discussion. Please do not modify it. |
[edit] Theme Song
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Production Credits
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sourceshttp://www.imdb.com/title/tt0372071/ http://ricojr.wordpress.com/2007/11/20/angelika-dela-cruz-returns-to-the-kapuso-network/
|
This is an archived discussion. Please do not modify it. |
[edit] Chocolate milk comes from choclate cows
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
The British economy is expected to save millions from producing chocolate milk straight from the cow saving costs of importing the cocoa beans from around the world. Coco-pops and Mars are now thinking of introducing new chocolate milk drinks - organic. And are even considering lactose intolerant drinks. These new organic chocolate milk drinks are expected on the market for Christmas, although currently they are in the process of testing to review how the market reacts to chocolate milk coming straight from the cow. [edit] Sources212.188.154.254 (talk) 10:51, 12 December 2007 (UTC) Articles for creation/2007-12-12
68.45.141.158 (talk) 11:43, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Terrell Carter
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Terrell Carter(born August 14, 1977) is an American singer, actor, and songwriter. He is known to most by his appearances in many of Tyler Perry's Plays. [edit] BiographyTerrell Carter born Damon Terrell Carter, learned he could sing at the the age of seven. He was discovered by Fred Hammond, while singing at the Winans' church in Detroit. From there his career basically took off. He's been in Madea's Class Reunion, Meet the Browns and the recent Tyler Perry play, What's done in the dark. He's also appeared in the play made move, Diary of a Mad Black woman. [edit] Sourceshttp://www.channel4000.com/sh/entertainment/ontheset/entertainment-ontheset-20000118-222929.html http://www.terrellcarterfanz.com 152.121.17.9 (talk) 14:14, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Hazrat Shah Saqlain Miyan Huzoor Sharafati ul Qadri
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sourceshttp://en.wikipedia.org/wiki/Wikipedia:Articles_for_creation/2007-12-11 http://www.alsaqlain.com http://www.alsaqlain.net http://www.reference.com/search?q=barely 203.123.42.228 (talk) 14:35, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Diamond Girl (film)
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. This is a film based on the novel written by Diana Palmer. [edit] PlotA girl named Claire has been working for the playboy Denny for 4 years. She likes him but he doesn't even give her a second glance. Denny's brother Regan comes into town and Denny and Reagan are competitive with each other. So naturally when Regan wants to manipulate Denny so Denny doesn't accept an offer given to him he realises that he can't do it alone, so he seeks the help of Claire. Claire acts as Regans girlfriend and distracts Denny. A few twists and turns later and you'll be felt thinking "That was such a heartwarming film but it was so cheesy". [edit] The leading castRegan --> Jonathon Cake Claire -->Joely Collins Denny --> Kevin Otto Regan + Denny's mother (MRs Montana) --> Dyan Cannon [edit] Linkshttp://www.imdb.com/title/tt0139984/ -- IMDB is not a reliable source. Ariel♥Gold http://www.imavision.com/en/eStore%2CwciCatalogue%2CType-P%2CID-2179%2CLoadCat-1.html -- Sales sites are not reliable sources Ariel♥Gold 80.193.38.187 (talk) 14:40, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] StreetCred
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sources69.94.207.84 (talk) 15:00, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Pokemon Ranger 2
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sources86.141.129.52 (talk) 15:09, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Michael Weidman
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Décollement
This request for creation has been accepted. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
[edit] SourcesThe accented form is used in the Decollement article and Detachment (disambiguation). See http://www.google.com/search?q=D%C3%A9collement for examples of both forms. 71.41.210.146 (talk) 15:22, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Cost Unit
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] SourcesCost Accounting by Vikas Publishers 122.167.13.200 (talk) 15:29, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Gerry Brown
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Gerry Brown was the creator and producer of the 1972-3 wWW2 drama 'The Pathfinders [edit] Sourceshttp://www.imdb.com/title/tt0165053/ http://en.wikipedia.org/wiki/Pathfinders_%28TV_series%29 http://www.memorabletv.com/bfp1.htm
|
This is an archived discussion. Please do not modify it. |
[edit] Ashley Zych
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. [edit] Sources209.175.13.43 (talk) 16:30, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Matt Morin, Milwaukee, WI
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Matt Morin is an amature mixed-martial artist and former wrestler from Milwaukee, WI. He trains at Adrian Serrano's Combat Sports gym located on the west side of Milwaukee. Personal
Recent Bouts On August 18, 2007 Matt earned the Konquer the Kage Interim Lightweight Title at 155 lbs. Matt defeated Ryan Stock (Team Crazy)at 1:49 in Round 1 by tapout (rear naked choke). On September 29, 2007 Matt earned the Lightweight Combat USA MMA -155 Title Matt defeated Peter Grimes (Miletich Fight Team Bettendorb IA USA)at 2:30 in Round 2 by tapout (guillotine choke) On November 10, 2007 in Dave Strassers Freestyle Combat Challenge 4 Matt defeated Justin Shipman at :31 in Round 2 by tapout (rear naked choke) [edit] Sourceswww.adrianserrano.com http://www.combatusafights.com/results/ http://fcfighter.brinkster.net/eventfights.asp?EventInstanceID=5128 http://www.sherdog.com/Fightfinder/fightfinder.asp?search=yes&EventID=5915 http://www.savage-entertainment.com/fighters.php http://www.nickagallar.net/ 67.52.245.125 (talk) 17:11, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Cranial Screwtop
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Having being reared in at a time 80’s cheese was force fed from all sides, but having inherited a religious devotion to Punk Rock, it was just inevitable that chaos would rain over our heroes' musical preferences. No-one could, or should, survive listening to The Damned and Joe Dolce in the same sitting, and the resulting bedlam of music brought Cranial Screwtop into existence. Formed in 2000 by Mark (Drums and Lead Vocals) Cranial Screwtop are an eclectic mix of individuals, every member having a very strong musical background, undertaking a variety of day jobs from Gigolo to Durex Stress Tester J, however all sharing the same vision and passion for covering 80’s Trash in a Punk Rock Style and doing it in the most enthusiastic and fun way possible. A number of years later and after lots of hard work gigging around Manchester, Sheffield and Liverpool playing numerous venues including Night and Day, Late Room, Hard Rock Café, Manchester Academy 3 and even the odd wedding, the band have gained a strong and loyal fan base from not only their energetic and humorous live shows, but also through their unexpected and original choice of songs. Their set includes covers of Duran Duran, A Flock of Seagulls and The Bangles to name but a few, it also includes covers borrowed from likeminded visionary bands such as China Drum (Wuthering Heights by Kate Bush), No FX (99 Red Balloons by Nena) & Toy Dolls (500 Miles by The Proclaimers). “The whole of their set is full of proven classics re-invented into punk rock delivered with all the attitude and energy that music genre demands”, “you could say that they rescue badly presented 80’s songs and release them back to the wild with their own original and imaginative arrangements” This truly is a covers band unlike any other. Although never initially intended, in 2007 the band produced their first full length album entitled “Too Fast For Technology” which was released in mid 2007. Not wanting to be accused of standing still, the band are currently working with a new vocalist Nichola to expand their live repertoire and are also experimenting with some original material so who knows what the future will hold? You may see them on the Eurovision Song Contest if only to follow in the footsteps of Buzz Fizz who must form the definition of 80’s Trash, whatever Cranial Screwtop decides to do in the future there is one guarantee they will always make, and live up to: “it will ROCK!!!” [edit] Band Members
[edit] DiscographyIn 2007 Cranial Screwtop released their debut album Too Fast For Technology featuring the following tracks:
[edit] Sources194.106.59.122 (talk) 17:29, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Campbell Works
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
From the gallery and project rooms, Taylor and Murray have developed a succession of unique and extraordinary projects, installations and exhibitions, weaving a route through the commercial, experimental and public realms. [edit] The buildingLocated in North London, the Campbell Works building used to be one of many warehouses comprising the Stoke Newington Brewery. In 1997 Taylor and Murray took it on and have since then been reordering its internal structure making it dynamic and functional. Campbell Works holds a gallery space, a multi-functional project room, artists' studios and the organisation's offices. [edit] ProjectsRecent projects include: as well as a series of group and solo exhibitions of new and established artists, such as Shane Bradford, Shaun Doyle an Mally Mallinson. Accompanying events include talks by Richard Wentworth, screenings of movies such as Mondo Cane and live gigs by underground bands from London. [edit] PublicationsWorks is an extension of the exhibition space in the form of a newspaper and is published by Campbell Works on the occasions of new projects to act as a wider discussion around their themes, thinking and visual language. It is the new parent for its surrogate offspring artinit. [edit] FundingCampbell Works has received financial support and funding from many organisations such as:
|
This is an archived discussion. Please do not modify it. |
[edit] See also
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Hotteh is Queer
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Paul Brickman
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Paul Brickman is an American screenwriter and film director who was born on April 23, 1949 in Chicago, Illinois, USA. He is best known for his directorial debut film Risky Business for which he also wrote the screenplay. Brickman began his career as a camera assistant and story analyst. In 1990 he wrote and directed his follow up film Men Don't Leave starring Jessica Lange, an adaptation of the 1982 French film La Vie Continue. [edit] Sources
|
This is an archived discussion. Please do not modify it. |
[edit] Denial
This request for creation has been accepted. Please do not modify it. | |
---|---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
|
Infobox Single
]]}} "Denial" is the twenty first single by the British girl group Sugababes, and the third to be taken from their fifth studio album Change.[1] The single was announced in early December by The Sun but was snubbed by fans who believed "My Love Is Pink" was the next single due to the fact that the song was sent to radios and was able to download. This is now however been denied by the record label saying that the promotional cds had only been sent out for clubs and dance radio stations only.[2] {{-}} |
This is an archived discussion. Please do not modify it. |
[edit] Digital Fine Contrast
This request for creation has been accepted. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
The initial announcement[2] claimed monitors with DFC could achieve a contrast ratio of 1600:1, while later products have been presented as capable of ratios even as high as 5000:1. [edit] Sources86.123.7.202 (talk) 18:44, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Kutavicius
This request for creation has been accepted. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
Redirect to Bronius Kutavičius [edit] SourcesSpelling without Lithuanian characters. 212.76.37.160 (talk) 18:47, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Adam Guest
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sources100 years of GRFC (book) gresleyroversfc.com
|
This is an archived discussion. Please do not modify it. |
[edit] Yabazebe
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sourcesplease enter this on you website. its a word i made up which i use and all my friends use everyday and it will one day be use by everyone Thanks http://en.wikipedia.org/wiki/Wikipedia:Articles_for_creation/Today#Yabazebe http://en.wikipedia.org/wiki/Wikipedia:Articles_for_creation/Today#Yabazebe http://en.wikipedia.org/wiki/Wikipedia:Articles_for_creation/Today#Yabazebe http://en.wikipedia.org/wiki/Wikipedia:Articles_for_creation/Today#Yabazebe 12.149.8.201 (talk) 20:35, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Andromedus
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] SourcesDr. Phillip Buchannon P.O. Box 30456, Lake Michigan 206.225.103.117 (talk) 20:35, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Buffalo BioSciences
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. Buffalo BioSciences is a driving force in Upstate New York’s transformation to a high-technology and knowledge-based economy. They provide comprehensive life science management services to a broad network of clients including life science companies, researchers, technology transfer offices, investors and economic development organizations. The company is headquartered in the recently completed New York State Center of Excellence in Bioinformatics & Life Sciences. Located on the Buffalo Niagara Medical Campus alongside the prestigious Roswell Park Cancer Institute and Hauptman-Woodward Medical Research Institute, this new state-of-the-art facility is dedicated to life sciences research, discovery and commercialization. [edit] Sources"Benefits Point Biotech Firms to Buffalo" by Vicki Brower 128.205.16.3 (talk) 20:53, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Matthew Taggart
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
Matthew Taggart, otherwise known as 'Matt' or 'Taggy', is a 15 year old boy from Scotland. He has a beautiful girlfriend, and a friend who is not sure about his sexuality. I shall not name any names, but the word 'Dorothree' springs to mind. Throughout his life he has experienced many things, and made many friends. He will go on to do great things in his later life, but currently he is focussing on his schoolwork, keeping everyone that surrounds him happy, and generally being a good guy. Thank you for listening |
This is an archived discussion. Please do not modify it. |
[edit] Ioannis Aslanidis
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
[edit] Sources87.221.5.170 (talk) 21:35, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] B.A.M.F
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
68.45.141.158 (talk) 21:55, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] MR.stinky
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Michael Travesser
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there. [edit] IntroductionMichael Travesser was born Wayne Bent in 1941. He is the spiritual leader of the sect, The Lord Our Righteousness, which dwells in a place called, Strong City, which consists of about 77 people living in Travesser Park, near Travesser Creek in the U.S. state of New Mexico as well as other devotees around the world. Travesser and his followers believe that he is the Son of God and that he, along with his followers, fulfill the second coming of Jesus. [edit] Liferavesser converted to Christianity in 1967 while attending a Baptist church in Poway, California. Thereafter, he became a minster in the Seventh-day Adventist Church until 1982, when he left the Adventist ministry. Believing himself to be led by God, he began a seminar called LifeSupports, which eventually brought him into conflict with leaders in the Adventist Church over interpretation of scripture. One of the most prominent Scriptures under debate was Galatians 6:7. As a result, he left the Adventist church in 1987. In spring of 2000, Travesser led his group to their present location in New Mexico. Here, beginning on October 31, 2000 the group observed a 1260 day "exile into the wilderness" based on Travesser's interpretation of chapter 12 of the Biblical Book of Revelation. The group draws parallels between this time in New Mexico and the time Jesus spent instructing his disciples. According to calculations, this three and a half year period in the wilderness was to end on April 19, 2004. April 19 would also mark the beginning of the "Time, times, and a dividing of times, which would end on December 15, 2007, which takes them to the 1335 days. Owing to numerous letters from cult members' friends and family, who feared the group would turn militant or suicidal, the FBI kept the group under close surveillance at that time, and interviewing Michael Travesser and his church people to ascertain their intentions. The cult considered such fears to be simply the excited reactions of those who didn't understand them or active persecution from those who hated them. In this also, the group draws parallels to Jesus and his followers being misunderstood or persecuted. [edit] teachingsMichael Travesser claims that all his teachings have been given to him by God. He teaches that the Son of God is the archangel Michael. Michael first appeared in Jesus of Nazareth, making this his first coming. At his second coming, Michael manifested himself in Travesser. However, Travesser does not teach that he is the only person of this second coming. Instead, the Son of God will appear in all who "love his appearing" and will yield to his appearing in them, making them truly the Sons of God. Thus, all of Travesser's followers and anyone else receiving the Anointing, are the actual image of God coming again, as the Anointing appeared in Jesus the first time. Citing Luke 17:21, the group considers that this was the message that Jesus delivered originally. Travesser claims that any "coming of Christ" that is not manifested in an individual is a fraud, thus, Travesser's followers do not await the appearance of Christ in the sky. In addition to his messianic claims, Travesser says that God told him, "You will always tell the truth." He says, "Messiah is not a man in the sky, but an awakening of the soul." "No man receives the second coming unless he receives it into himself." Travesser says. "There are thousands of false Christs pointing men to themselves and to their doctrinal theories, but only those who receive Messiah are anointed, and this truth is there for anyone." [edit] ProphesiesMichael Travesser claims that all his teachings have been given to him by God. He teaches that the Son of God is the archangel Michael. Michael first appeared in Jesus of Nazareth, making this his first coming. At his second coming, Michael manifested himself in Travesser. However, Travesser does not teach that he is the only person of this second coming. Instead, the Son of God will appear in all who "love his appearing" and will yield to his appearing in them, making them truly the Sons of God. Thus, all of Travesser's followers and anyone else receiving the Anointing, are the actual image of God coming again, as the Anointing appeared in Jesus the first time. Citing Luke 17:21, the group considers that this was the message that Jesus delivered originally. Travesser claims that any "coming of Christ" that is not manifested in an individual is a fraud, thus, Travesser's followers do not await the appearance of Christ in the sky. In addition to his messianic claims, Travesser says that God told him, "You will always tell the truth." He says, "Messiah is not a man in the sky, but an awakening of the soul." "No man receives the second coming unless he receives it into himself." Travesser says. "There are thousands of false Christs pointing men to themselves and to their doctrinal theories, but only those who receive Messiah are anointed, and this truth is there for anyone." Prophesies The group believes that Travesser prophesied the September 11, 2001 attacks. On September 10, 2001, he posted the following in his blog: "You have gone far enough, and now I will show you who it is that rules in the heavens. You have built your Babylonishtower, but I will make the topto break off and its foundations to sink into the mire. You will see the stability of the sand you have built on. You will try everything to save it but it will not be saved." It should be noted, however, that Travesser's writings contain frequent injunctions against the nation and culture of the United States, which he considers to be decadent, if not outright evil. Travesser claims that as of April 19, 2004 the world has been left in its sins, cut off from the intercession of Christ, while God's true Sons are called out from participating with the world. This is to correspond to the time after Jesus was crucified and raised from the dead, and is based on prophesies from the Biblical Book of Daniel. The group has seen the fulfillment of most of Michael's prophecies, and the group continues to look forward to the final things that Travessers states are presently unfolding. Travesser teaches that a year of rest, began in the fall of 2006. This "year of favor", is when all is well with God's people and all is hell with those who hate Him. In the fall of 2007 the year of Jubilee (Jubilee is a year of celebration and forgiveness originally held every 50 years in both Judaism and Christianity) begins. This fall of 2007 will also mark the end of 1335 days mentioned in Daniel 12:12 which occurs December 15, 2007. "Happy is he who waits and comes to the 1335 days." To Travesser's followers that will constitute the end of the process in which they receive their reward from God which also includes the desolation of the earth, which is its reward. Travesser states that beginning July 14, 2006 his work is only the work of judgment. This work was carried out on the Shillum.net Web site, but now is closed. He sees his work of intercession as complete. Travesser's group looks forward to the fulfillment of Daniel's Prophecy of Seventy Weeks late in 2007. The group counts 490 years (the 70 "weeks" of Daniel's prophesy multiplied by 7 years) since October 31 1517, the date Martin Luther published his 95 Theses. The prophesy of seventy weeks makes reference to the blessing of God's people and concludes with the "desolation of the desolator" (Dan. 9:27). Travesser has stated that a partial fulfillment of this prophesy may indicate the desolation of George W. Bush, who is "desolating the Middle East in his process of democratization." Travesser claims the results of the United States Senate and House elections of November 7, 2006 support his interpretation of Daniel's prophesy of seventy weeks. The Republican's loss of the majority in both chambers of the United States Congress and specifically the loss of Donald Rumsfeld marks the end (extremity) of the desolator. After this time is the time of trouble such as never was. The threats against Iran are looming large in the minds of the group. Travesser's current prophesies for the future included looking for the seventh plague of Revelation 16. The time of trouble such as never was is already well underway. It should be noted, however, that Travesser has said the prophesies are more easy to interpret after the events have already occurred. The first plague, says Travesser, the plague of the sore, is fulfilled in the person of Mahmoud Ahmadinejad. The President of Iran has made the "beast" sore, and the beast is moving to remove this sore. The first strike, says Travesser, was the U.N. sanctions against Iran passed on December 23, 2006. "No man can buy or sell (sanctions), save he that has the mark of the beast." Michael Travesser has finished publishing the "revelation of the plagues" on his Web site. He declares that the last plague is being poured out into the air, and then it is "done." He does not indicate just exactly when this plague is to be finished, but it is assumed to be before the end of the 70 weeks of years, prophecy in Daniel 9. Michael Travesser announced the closing of his Web site on March 9, 2007. He said that it would be closed in 7 days from the date of his announcement. He has stated that this is in preparation for him and his people to leave the earth. In his final statement, he indicated his last Web site was intended to announce the pouring out of the seven last plagues that are now falling and which he posted on his Web site. Since that is done, he states that, "It is Done." He stated that the world would not hear from him again. He states that now the time of the final desolation is here [edit] Sources
84.69.245.52 (talk) 23:08, 12 December 2007 (UTC) Articles for creation/2007-12-12
|
This is an archived discussion. Please do not modify it. |
[edit] Ben Larson
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
|
This is an archived discussion. Please do not modify it. |
[edit] Wolfram Euler
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
The scientific work of Wolfram Euler embraces five books and more than 70 articles covering almost every branch of Indo-European linguistics. Euler gained his PhD grade in 1979 with a thesis on agreements in the Indo-Iranian and anciant Greek nominal system (Gießen University). Afterwards, Euler did Indo-European (esp. Proto-Baltic) lexical sudies with professor Wolfgang Meid in Innsbruck/Austria. Subsequent works of Euler focussed e.g. on common lyrical topics in different Indo-European languages, the evolution of the Roman languagues from late ("vulgar") Latin and the emergence of the languague border between German and Scandinavian (i.e. Danish) in early middle ages. Today, he ist focussed on a monography on the early stage of Proto-Germanic. Euler is a distant relative of the famous mathematician Leonhard Euler (1707 - 1783). |
This is an archived discussion. Please do not modify it. |
[edit] Selected bibliography
This request for creation has been declined. Please do not modify it. |
---|
This request for creation has been reviewed. The reviewer comments appear below the article text.
If you want to make changes and try again, copy and paste your article into a new submission and make your changes there.
Category:German linguists Category:Historical linguists Category:Indo-Europeanists Category:1950 births |
This is an archived discussion. Please do not modify it. |