APG-66

From Wikipedia, the free encyclopedia

The AN/APG-66 radar is a solid state medium range (up to 150 km) Pulse-doppler radar designed by Westinghouse (now Northrop Grumman) for use in the F-16 Fighting Falcon. The system consists of the following line replaceable units:

[edit] Nomenclature

Per the Joint Electronics Type Designation System (JETDS), the AN/APG-66 nomenclature is derived thusly:

  • "AN/" tag indicates the nomeclature is derived from the JETDS
  • "A" indicating a system intended for use in manned aircraft
  • "P" indicating the system is a radar
  • "G" indicating a fire control radar
  • "66" as an arbitrary numerical designator

[edit] Specifications

  • Frequency: 6.2 to 10.9 GHz
  • Search cone: 120 degrees × 120 degrees
  • Azimuth angular coverage: ±10 degrees / ± 30 degrees / ± 60 degrees
  • Weight: 98 to 135 kg depending on configuration
  • Volume: 0.08 m³ to 0.102 m³ depending on configuration

[edit] Variants

  • APG-66(T47) - installed in Cessna OT-47B.
  • APG-66(V)2 - upgrade of base radar. New signal processor, higher output power, improved reliability. Range in clutter/jamming environment increased to 83 km.
  • APG-66(V)3 - as APG-66(V)2 but with CW illumination capability, possibly for export to Taiwan.
  • APG-66(V)X - improved version of the APG-66(V)2/3 radar with greater detection range.
  • APG-66H - installed on BAE Hawk 200 aircraft, smaller antenna, giving slightly reduced capabilities.
  • APG-66J - configured for the Japanese F-4EJ upgrade program.
  • APG-66NT - installed on Navy T-39N aircraft.
  • APG-66NZ - installed under the Project KAHU on New Zealands A-4 Skyhawk aircraft.
  • APG-66SR
  • APG-66SS
  • APG-66T - multi-target track while scan variant.
  • APQ-164 - designed for the B-1 Lancer bomber, with a passive electronically scanned array.
United States Air Force stub This United States Air Force article is a stub. You can help Wikipedia by expanding it.
Languages