Anadol
From Wikipedia, the free encyclopedia
 |
This article or section may contain excessive or improper use of copyrighted images and/or audio files. Please review the use of non-free media according to policy and guidelines, correct any violations, then remove this tag once compliant. See the talk page for details. |
| ANADOL | |
|---|---|
 |
|
| Type | Private |
| Founded | 1966 |
| Headquarters | Istanbul, Turkey |
| Key people | Vehbi Koç |
| Industry | Automotive |
| Products | Automobile, Pick-Up |
| Parent | Koç Holding |
Anadol was Turkey's first domestic mass-production passenger vehicle, and the second Turkish car after Devrim.
Anadol cars and pick-ups were manufactured by Otosan Otomobil Sanayii in Istanbul between 1966 and 1991.
Seven Anadol models were produced:
A1 (1966-1975), A2 (1970-1981), STC-16 (1973-1975), SV-1600 (1973-1982), Böcek (1975-1977), A8-16 (1981-1984) and Otosan 500 Pick-Up (1971-1991).
Production of the Anadol passenger cars was discontinued in 1986, while the production of the Otosan 500 Pick-Up continued until 1991. At present, Otosan builds Ford Motor Company's passenger cars and commercial vehicles, which are exported to numerous countries in the world, particularly to the European Union member states.
Contents |
[edit] Anadol A1 (1966-1975)
The Anadol A1, code named FW5 by Reliant which developed the prototype upon Anadol's request, went into production on 19 December 1966. The styling of the A1 was by Tom Karen of Ogle Design.
Production of the A1 started with the 1200 cc Cortina engine, but in October 1968 it was replaced with the relatively stronger 1300 cc Kent engine. In 1969 the dashboard gauges were updated with a new design and their positions were changed, while the ergonomy of the steering wheel was improved. In 1970 the two round headlamps at front were replaced with oval headlamps, a new transmission system was introduced, and the bumpers were changed. In 1971 the interior of the roof was covered with vinyl, in accordance with the fashion of that period. The design essentially remained this way until April 1972.
In 1971 a special model of the A1 was developed in dedication to the Mediterranean Games in İzmir, called the Akdeniz (Mediterranean). Anadol Akdeniz was like a prelude of the new model which arrived in 1972, and had bumpers which were integrated to the shape of the bodywork, a different front grille, rectangular headlamps with white signal lamps, and different rear lights. The interior of the car was also completely changed, with a new dashboard, new seats and new finishing materials. Starting from 1972, this model became the standard coupé of Anadol until its production was stopped in 1975.
The 5-seat body was built from fibre glass and affixed to an h-frame chassis. The Anadol was originally only available as a coupé, but in late 1973 was joined by a saloon (sedan) and an estate version. The chassis had independent front suspension utilising coil springs and leaf springs on a live axle for the rear. Brakes were disc in the front and drum in the rear. The steering system used a recirculating ball mechanism.
Anadol A1 was also the first Turkish rally car, and Anadol Ralli Takımı (ART) became the first Turkish rally team. The first official rally in Turkey, the 1968 Trakya (Thrace) Rally, was won by the famous duo of Anadol A1 pilots, Renç Koçibey and Demir Bükey. Other famous Anadol A1 rally pilots included İskender Atakan, Claude (Klod) Nahum, Mete Oktar, Şükrü Okçu and Serdar Bostancı. Famous rally driver Romolo Marcopoli was also an A1 fan.
Still in 1968, another Turkish driver, İskender Aruoba, participated in the 30,000 km Africa-Asia-Europe Tour, which lasted 8 months, with his Anadol A1.
[edit] Anadol A1 advertisements
 |
 |
 |
 |
 |
 |
 |
 |
[edit] Anadol A2 (1970-1981)
Anadol A2 was both Anadol's first 4-door model, and the first fiberglass 4-door sedan in the world.
Its prototype was prepared in 1969 and the car was introduced to the market in 1970.
Apart from having 4 doors and a single wide front seat for both the driver and the passenger, the first versions of the A2 shared the same technical specifications with the A1. Starting from April 1972, the front part of the A2 received the same changes that the A1 received that year (including the new nose, front grille and headlamps) and this design went on until the end of 1975.
In 1976 a new version of the A2, the SL, was introduced. The biggest changes in the exterior appearance of the car were made in the front and the back, with new lamps. Particularly the rear lamps had a completely new appearance. The interior was also completely changed, with a new steering wheel, new dashboard and new finishing materials.
The A2 was also the first Anadol model which received extensive crash tests in order to improve the safety of the car.
Since the A2 was primarily designed as a family sedan, and was also suitable for commercial uses, it became the best selling Anadol model, with a total of 35,668 units sold. The A2 was replaced by the A8-16 in 1981.
[edit] Anadol A2 image gallery
 |
 |
[edit] Anadol STC-16 (1973-1975)
A sports model, the STC-16, was produced between 1973 and 1975. The first prototype was introduced in 1972.
Designed by Eralp Noyan, the STC-16 was the first Turkish sports car. It was also the second completely Turkish designed car after Devrim which was produced in 1961 as the first Turkish designed and built automobile.
In 1971 Erdoğan Gönül, the General Manager of Otosan and the son-in-law of Vehbi Koç, convinced the latter on the production of a sports car. The car was aimed at the upper segment of the Turkish market and would participate in international rallies, thus bringing prestige to the Anadol brand. The creation works of the STC-16 were assigned to Turkish designer Eralp Noyan, who had graduated from the Royal Fine Arts Academy in Belgium. The STC-16 was a completely new Anadol and looked nothing like the previous models of the brand. The design of the STC-16 had similarities with the sports car models of that period such as the Datsun 240Z, SAAB Sonett, Aston Martin, Ginetta and Marcos, but the overall form of the car had a unique and distinct character. Eralp Noyan was particularly inspired by the Supermarine Spitfire aircraft of World War II when designing the interior and exterior of the car.
The STC-16 used a shortened and modified Anadol chassis and suspension system, while using a 1600 cc Ford Mexico engine. The transmission system, on the other hand, was the one that was used by some high performance Cortina and Capri models in Britain. The STC-16 had all the typical dashboard gauges and indicators which the British and Italian sports cars of that period had. Apart from the Speed and RPM indicators, a resettable cruise distance indicator (something new for that period) as well as a Lucas ampermeter and Smiths oil, fuel and engine temperature indicators were installed on the dashboard.
Following an initial development period of 11 months, the first 3 prototypes of the STC-16 became ready for road tests, which took place at the Cengiz Topel Airport and the section of the E-5 highway between Istanbul and Adapazarı. The first crash tests of the STC-16 were also performed in this period. Afterwards, the STC-16 was taken to England by Nihat Atasagun, Otosan's Production Manager, who tested the car at the M.I.R.A. circuit. The car received great attention at the streets and highways of England, where most people thought that it was the prototype of a new British sports car. Several traffic police officers stopped the car in England, which had a special testing licence plate, "320-E", for receiving more information about the new model. The STC-16 was tested by British pilots at the circuit, and modifications were made according to their suggestions, following which the car's performance and safety characteristics were improved. Finally, at the beginning of April 1973, the first STC-16 rolled out of the Otosan factory in Istanbul and went into the showroom.
The car's name, "STC-16", was originally an acronym for "Sport Turkish Car 1600". But as it was also intended for international markets, STC was alternatively named as the "Sport Touring Coupé". Among the Turkish youth, however, STC was interpreted as "Süper Türk Canavarı" (Super Turkish Monster).
Unfortunately, the global oil crisis of 1973 meant bad news for the STC-16. Not only car fuel became more expensive, but the cost of building fiberglass (which is a petrochemical product) car bodies such as that of the STC-16 also sky-rocketed. The rear-wheel drive STC-16's engine consumed a lot of fuel, and the sport coupé market in Turkey appealed to a very small segment, particularly to the young members of high-income families. Unlike other Anadol models of that period which were sold for 50,000 to 55,000 Turkish Liras, the STC-16 had a price tag of more than 70,000 Turkish Liras. When all these factors came together, the primary customers of the STC-16 remained the rally drivers, sports car enthusiasts and young celebrities.
Nevertheless, the STC-16 became synonymous with its era in the memory of that period's Turkish youth, and the upgraded competition version of the car won numerous victories in rally competitions in Turkey and Europe. Famous Anadol STC-16 rally pilots included Renç Koçibey, Demir Bükey, Romolo Marcopoli, İskender Aruoba, Cihat Gürkan, Ali Furgaç, Şevki Gökerman, Serdar Bostancı, Murat Okçuoğlu, Cüneyd Işıngör, Mehmet Becce, Hızır Gürel, Derya Karaköse and Osman Arabacı. Instead of the heavy steel chassis of the road version STC-16, the rally version used a much lighter FRP chassis, combined with a modified 140 bhp (104 kW/142 PS) engine.
A total of 176 Anadol STC-16 have been produced between 1973 and 1975, most of them in 1973, until the global oil crisis in that year reduced demand and slowed down production. Most of the STC-16s were painted to "Alanya Yellow", which became synonymous with the car. Some of them were painted to red with white racing stripes, and some to white with blue racing stripes, as was fashionable with the sports cars of that period.
[edit] Anadol STC-16 image gallery
 |
 |
 |
 |
 |
 |
 |
 |
[edit] Anadol SV-1600 (1973-1982)
The SV-1600, which headed to the showrooms at the end of 1973, was the world's first fiberglass-bodied 5-door station (estate) car. It had a completely different design and appearance than the 4-door Anadol models, and was inspired by Reliant's Scimitar sports-station coupé.
Several details of the car bore similarities with the station wagon designs of Bertone and Pininfarina in that period. The first examples of the SV-1600 had single-colour paint, while the front hood had a spoiler, which was something new for station cars.
After some time, a more luxurious version was produced, and bi-colour paint were applied, while new interiors were introduced. Starting from 1976, the SV-1600 received aluminium wheels, a new steering wheel, new side mirrors, and a single-colour paint with a black-and-white stripe on the sides. The car also had retractable seats for further enlarging the trunk space.
Production of the SV-1600 continued until 1982.
[edit] Anadol Böcek (1975-1977)
The Böcek (Bug) was designed by Jan Nahum, who, in that period, worked at Otosan's Design and Development Department. Later in his career, Nahum became the General Manager of major companies like Otokar and Tofaş, the Head of International Business Development at FIAT, and the CEO of Petrol Ofisi. Jan Nahum's father, Bernar Nahum, played an important role in the establishment of the Anadol factory and the development of Anadol A1, while another close family relative, Claude (Klod) Nahum, was an Anadol A1 rally racer, as well as the developer of the future Otosan Anadol Wankel engine, and is currently a founding partner of the KIRAÇA Group of Companies, which also includes KARSAN Automotive Industries.
Böcek made it to the showrooms in 1975. The vehicle, similar in appearance to Volkswagen's "Buggy" versions but different in design concept and characteristics, was developed upon request for a similar vehicle by the Turkish Armed Forces. Otosan also predicted that the rising popularity of Turkey's tourism and beach resorts would guarantee a certain level of demand for a civilian-use version of such a vehicle. The Böcek's roof could be opened, it didn't have any doors, and its front window had the same inclinement with the hood. This continuous inclinement was a new concept which was later used by the future SUVs. The futuristic front panel and gauges of the Böcek were also ahead of its time, and were used many years later by future passenger vehicles in Europe.
The Böcek had a 1298 cc 63 bhp (47 kW/64 PS) Ford engine, which provided a very good performance given the vehicle's small dimensions. In line with the pop-art designs of that period, the Böcek had an asymmetrical front and rear appearance. The front grille was not symmetrical, while in the rear there were 3 stop lights at left and 2 at right. A front mirror, which was formed of 5 different angled mirrors which provided a telescopic view, was mounted on top of the windshield. The front tyres were 225*55*13 in dimension, while the seats were of fiberglass covered with vinyl, which was also something new for that period.
Several different versions of the Böcek (Bug) were designed for institutional and civilian use. There was a version with gull-wing doors, a version for the TRT which was optimized for using film and video cameras, an offroad version, a tractor/trailer version and a military version.
The Böcek was a design concept that was ahead of its time, and just like the STC-16, it could not reach high sales figures due to the economic situation in Turkey and the rest of the world in that period, caused mostly by the global oil crisis. Only 203 examples of Böcek were produced between 1975 and 1977.
[edit] Anadol A8-16/16 SL (1981-1984)
Production of the 4-door A8-16 series began in 1981. The design concept of the A8-16 was largely inspired by the SAAB and Volvo models of those years, with futuristic details such as the large headlamps, inclined nose and the high-positioned rear trunk - traits that were particularly associated with SAAB models. However, it also had details that appeared "retro" in 1981, such as the rear lights which originally belonged to Böcek, but didn't look good on the A8-16. The interior design and the materials used also did not please the traditional Anadol customers. Many of the design characteristics, especially the door windows and frames, were borrowed from older Anadol models such as the SV-1600 which was designed in 1973, and most potential customers saw this car as a hodge-podge of old Anadol spare parts, mixed with some new ideas. Even the relatively higher performance 1.6 Pinto E-Max engine, which were used in the first A8-16s that were produced between 1981 and 1982, could not improve the popularity of these cars. As a result, in order to reduce the production costs, this engine was no longer used in the A8-16 SL models of 1983-1984, in which the older 1.6 engines were used. Only 1,013 examples of the A8-16 were produced between 1981 and 1984.
[edit] Anadol prototypes (1977-1986)
[edit] Wankel engine
Otosan Design and Development Department employed many talented engineers, such as Claude (Klod) Nahum, who lead the group which developed a Wankel engine that could produce more than 100 bhp (75 kW/101 PS) despite its small size. But due to its high development costs and the well-known problematic character of Wankel engines, this engine was not used in Anadol's models. Today, one of these Wankel engines are displayed at the Rahmi M. Koç Museum in Istanbul.
[edit] FW 11
In 1977 Marcello Gandini designed the FW 11 for Anadol and Reliant, the latter naming it as the Scimitar SE 7. Four prototypes of this car were produced, two of which were sent to England with the Reliant badge, and two other examples, one of them white and the other one blue, were sent to Turkey with the Anadol badge. The car, which had a modern design and "luxuries" for that period's European cars such as electrical windows, was deemed too expensive to produce profitably by Anadol and the project was shelved. The two Anadol prototypes were held in Koç Holding's (which owns Otosan) depot in Istanbul's Acıbadem district for nearly 25 years. Today, one of them is displayed at the Rahmi M. Koç Museum in Istanbul, since 2004.
One of the other prototypes, the Reliant Scimitar SE 7, is currently displayed in England. Following Anadol's decision not to build the FW 11, Reliant exhibited the Scimitar SE 7 at its stand as a prototype during the Birmingham Motor Show.
The FW 11 design was later purchased by Citroën, and with little changes (e.g. a steel unibody with steel and plastic panels instead of fiberglass) it was mass produced as the Citroën BX for 12 years, becoming a "best-seller" for the French company.
[edit] Çağdaş
During the late 1970s, Jan Nahum developed several prototypes and worked on new Anadol designs. Many of these new prototypes, which even included full-scale models, however, could not be mass-produced.
Otosan, in that period, aimed at creating modern cars, in line with the developments of the automotive industry worldwide, while reducing the amount of fiberglass which it used for building the body parts of its vehicles. To meet this demand, Jan Nahum designed and built two different prototypes of the Anadol Çağdaş (meaning Contemporary or Modern). The bodywork of Çağdaş was made of fiberglass parts fitted on a steel skeleton. The Wankel engine developed by Claude (Klod) Nahum was installed on it.
Çağdaş won the top prize of the Turkish State Fine Arts Academy in Istanbul in the industrial design category, and Jan Nahum received the award from Prof. Dr. Önder Küçükerman.
Turkish newspapers made detailed coverage of the car, stating that production would begin either in 1980 or 1981. However, due to the political, social and economic instability in the country, the project could never be realized.
A single prototype of Çağdaş is today displayed at the Rahmi M. Koç Museum in Istanbul.
[edit] A9
The A9, designed by Bertone, was the last prototype of Anadol. It was a 4-door sedan with a very modern design for the early 1980s. The rear parts of the car resembled the future Peugeot 405, while the overall form resembled the Volvo sedans of the mid 1980s.
A new and more contemporary-looking Anadol logo was developed for the A9.
The design of the wheels were also characteristic of the European cars of the mid to late 1980s.
However, the A9 couldn't make it to full mass-production and the prototype was destroyed.
Anadol subsequently ceased to exist as a car brand in 1986, as the Otosan factory began producing Ford Motor Company's passenger car models.
[edit] Anadol models
- A1 (1966-1975): 19,724 produced
- A2 (1970-1981): 35,668 produced
- STC-16 (1973-1975): 176 produced
- SV-1600 (1973-1982): 6,499 produced
- Böcek (1975-1977): 203 produced
- A8-16/16 SL (1981-1984): 1,013 produced
- Otosan 500 Pick-Up (1971-1991): 36,892 produced
[edit] Anadol prototypes
- FW11 (1977)
- Çağdaş (late 1970s)
- A9 (early 1980s)
[edit] External links
- http://www.anadol.biz Anadol Automobile Association
- http://www.anadolclub.org Anadol Automobile Club
- http://www.stc-16.org Anadol STC-16 Enthusiasts Site
- Anadol STC-16 video
- http://www.kobiline.com/web/anadol/ (in Turkish)
- http://auta5p.car.cz/katalog/anadol/anadol.htm (in Czech)
- http://carcatalog2.free.fr/que2.htm (in French)
