Talk:Amine gas treating

From Wikipedia, the free encyclopedia

PLEASE use the above + tab to enter a new comment. That provides you a form in which to first enter a Subject and then enter the new comment. Please sign the comment with four tildes like this ~~~~. That automatically signs it with your user name, the date and the time. The form automatically provides subject Headings like those below and enters them in the Table of Contents which will appear below after four comments are posted.

The first responder to someone's new comment should enter the response just beneath the new comment (instead of using the above + tab) and indent the response by starting with a colon like this :. Any second responder, indent further by starting with two colons like this :: and any third responder, start with three colons like this ::: and so forth. If we don't follow these practices, the result is jumbled mess.


[edit] Need more information

I NEED MORE INFORMATION ABOUT AMINE DEGRADATION IN GAS TREATING PLANT i.e TO REMOVE H2S.—Preceding unsigned comment added by 195.229.242.54 (talk • contribs) 6 May 2006 (UTC)

You really should not "shout" by using all capital letters, and you should always sign your messages. That will make it more likely that people will help you. mbeychok 06:05, 17 November 2006 (UTC)

[edit] Major expansion

I just finished a major expansion of the this article and I have removed the stub tag because I think it is no longer warrants a stub. The article could still use more Wiki links, external links and references. mbeychok 06:05, 17 November 2006 (UTC)

Why I reverted the drawing change made by [[User:Goatchze}

The original process flow diagram in this article (which I drew) contains more information and does so in much less space than does the commercial process flow diagram that User:Goatchze provided to replace the original drawing. The original drawing does nor require horizontal scrolling as does the commercial diagram provided by User:Goatchze.

The drawing provided by User:Goatchze is one developed for the commercial firm of Bryan Engineering and Research (BRE) ... probably for their PROMAX simulation program that they sell. I have a great deal of respect for BRE and they are an acknowledged leader in the field of amine gas treating. They are quite well represented in the external links section of this article. The commercial drawing provided by User:Goatchze is a "slicker", more "eyecatching" drawing for promoting BRE's expertise ... but it does not provide as much content as does the original schematic flow diagram that I drew in the much more traditional process engineering manner.

I believe that User:Goatchze's real name is Luke Addington and he is an employee as an engineer in training (EIT) of the Bryan Engineering and Research Company. I welcome him to Wikipedia but I must caution him that he should be careful about writing articles or editing existing articles with material that might be construed as promoting his company.

Be that as it may, my primary reason for reverting back to the original drawing is that it is a better schematic process flow diagram with more information. Furthermore, the commercial drawing provided by User:Goatchze includes many equipment item numbers which are not explained at all.

Just as a matter of trivia, both User:Goatchze and myself are graduates of Texas A & M in Chemical Engineering. I was in the class of 1944 which I suspect was many decades before his class. Regards, mbeychok (talk) 11:30, 5 January 2008 (UTC)

While I will not deny that it is nice to see PFDs generated by ProMax on Wikipedia, the original intent was simply replacing the drawing with a "slicker" one, as you described. Using one that I already had seemed to be a convenient method, especially since that is the general format that process engineers see basic PFDs today (not P&IDs, which are still drawn with a CAD program or Visio). I also considered using standard Visio blocks for drawing the PFD, but I guess I got lazy. I hope that there was no offense by the replacement.
I did do my best to remove unnecessary blocks/units from the flow diagram that are required in the simulator, such as the recycle block. I also removed the BR&E watermark that is normally placed on flow sheets drawn in ProMax. Looking over at the glycol dehydration page I see that I did not do so for that schematic and will replace it (BR&E Logo is gone but unnecessary blocks remain). As you probably know I am fairly new to any kind of Wikipedia editing and am unsure what image size requires horizontal scrolling (at my resoultion none of my uploaded images required horizontal scrolling). Perhaps you could help me with this?
Thank you for the advisement. I realize that I am at times walking a fine line of self promotion, but my intent is simply to contribute information about the art in which we are involved to the general public. I take no offense if something is deemed inappropriate and removed.
Thanks to you and Google, I guess that I am "outted". I'm suprised I did not have my class written on my Blogger profile. Your suspicion is right, it was a few decades after you that I finished at A&M. Almost 6. Thanks for your help.Goatchze (talk) 20:33, 15 January 2008 (UTC)
No offense taken by your original replacement. I am glad to see that you are aware that you are "at times walking a fine line os self promotion". Many of us have that same problem, and being aware of it is quite important. As for the maximum width of a drawing that will fit on an article page without requiring horizontal scrolling, the answer is 584 pixels (px). See the "Flow diagram of a typical oil refinery" in the Oil refinery article ... it has a width of 584px.
You can always reduce the size of a drawing by using the "thumb" format, which is: [[Image:Whatever|thumb|right (or left or center)|XXXpx|Whatever title you wish, if any]] where XXX represents the size selected. But you should be aware that size reduction often makes any text in the drawing too small to be legible and, in my opinion, reduces the resolution somewhat. Therefore, I always strive to make my drawings 584px or smaller and to make sure that my text font will be legible at whatever size that I made my drawing. Regards and welcome to Wikipedia, - mbeychok (talk) 01:37, 16 January 2008 (UTC)